Applies To:

Show Versions Show Versions

Archived Manual Chapter: WANJet® Appliance Administrator Guide: Appendix E - WANJet 400 Specifications
Manual Chapter
Table of Contents   |   << Previous Chapter   |   Next Chapter >>

This article has been archived, and is no longer maintained.


WANJet 400 Specifications

WANJet 400 platform specifications

The following specifications apply to the WANJet 400 platform.

Table E.1 WANJet 400 platform specifications
8.9 cm H x 43.2 cm W x 54.0 cm D
(3.5" H x 17" W x 21.25" D) per unit
2U industry standard rack-mount chassis
8.6 kg (19 lbs.) per unit
Power Supply
2 x 300 W redundant hot swappable power supplies
Input Voltage
100-240 VAC, +/-10%
Maximum Power Consumption
300 W
Maximum Heat Output
1025 BTUs
Network Interfaces
Four 10/100 BaseT Fast Ethernet, with two of them bridged fail-to-wire
LCD module
6-button keypad, 2 x 20 LCD
DDR-400 1GB with ECC x 4, Total 4 GB
Operating Temperature
0° to 60° C (32° to 140° F)
Non-operating ambient temperature range
-40° to 70° C (-40° to 158° F) at a relative humidity of 10% to 90%
Relative Humidity
10% to 90% noncondensing
Safety Agency Approval
Electromagnetic Emissions Certifications
FCC CB Scheme



Specifications are subject to change without notification.

Table of Contents   |   << Previous Chapter   |   Next Chapter >>

Was this resource helpful in solving your issue?

NOTE: Please do not provide personal information.

Incorrect answer. Please try again: Please enter the words to the right: Please enter the numbers you hear:

Additional Comments (optional)