Applies To:

Show Versions Show Versions

Archived Manual Chapter: WANJet® Appliance Administrator Guide: Appendix A - WANJet Appliance Messages
Manual Chapter
Table of Contents   |   << Previous Chapter   |   Next Chapter >>

This article has been archived, and is no longer maintained.


A

WANJet Appliance Messages


WANJet appliance messages and codes

Table A.1 lists information about messages, such as errors, warnings or diagnostic log messages, that may occur on the WANJet appliance. If your company uses a centralized message server, you can configure the WANJet appliance to send messages to an associated SNMP server or Syslog server. Refer to Configuring Syslog and SNMP settings , located in Chapter 6, for more information.

You can also view messages that have occurred on your WANJet appliance from the Web UI. In the navigation pane, expand Reports and click Diagnostics; then from the General menu, choose Diagnostic Log.

Table A.1 WANJet appliance messages 
Code
Message and Description
WANJet Appliance Component
1000 to 1002
Error: Configuration error
Optimization Engine
1003 to 1005
Error: Initialization error
Optimization Engine
1006 to 1007
Error: Internal error
Description: Internal errors related to TCP compression.
Optimization Engine
1100 to 1103
Error: Internal error
Packet Processor
1150
Maximum number of optimized connections reached
Packet Processor
1151
Connection reset: Source IP:Port <IP address:port #> Destination IP:Port <IP address:port #>
Description: The WANJet appliance reset the connection because Connection Intercept is turned on.
Packet Processor
1200 to 1201
Error: Configuration error
Optimization
1202 to 1203
Error: Initialization error
Optimization
1204 to 1207
Error: Internal error
Optimization
1209
Link down with <Proxy IP address>
Description: The local WANJet appliance has no communication with the remote WANJet appliance.
Optimization
1210
Link up with <Proxy IP address>
Description: The WANJet appliance resumed communication with the remote WANJet appliance.
Optimization
1211
Authentication failed with <Proxy IP address>
Optimization
1212
Error: Connection from unauthorized proxy <Proxy IP address>
Optimization
1213
Error: Internal error
Optimization
1214
Error: The version <version #> is incompatible with <Proxy IP address> version <version #>
Optimization
1215
Error: License expired on <date>
Optimization
1216
Error connecting to remote client <Proxy IP> from <Initiator_IP>
Description: The remote WANJet appliance was unable to connect to a server from the initiator IP address.
Optimization
1217
Error connecting to local client <Proxy IP> error (<error spec>)
Description: where <error spec> is a standard socket error. The local WANJet appliance was unable to connect to a server.
Optimization
1218
Error: Diagnostic log test error
Description: For internal use only.
Optimization
1219
Connection (<server IP> <-> <client IP>) not optimized: SMB signing required (code 1219)
Description: The connection requires SMB signing so it was not optimized.
Optimization
1221
GP Session Up
Description: A diagnostic log message that occurs when the generic proxy session starts.
Optimization
1222
GP Session Down
Description: A diagnostic log message that occurs when the generic proxy session fails.
Optimization
1250
Version (<version #>) up and running
Optimization
1251
Error: Internal error
Optimization
1252
Warning: License Limit Exceeded
Optimization
1253
Warning: Invalid license key - Bandwidth optimization off
Optimization
1254
Warning: License key not entered - Bandwidth optimization off
or
Warning: License expired - Bandwidth optimization off
or
Warning: License invalid <reason> - Bandwidth optimization off
Optimization
1255
Warning: <#> days remain for evaluation license to expire
Optimization
1256
Warning: WANJet is activated for evaluation for <#> days
Optimization
1257
Warning: Evaluation license key expired
Optimization
1258
License violation: Bandwidth optimization stopped
Optimization
1259
Cannot complete the remote upgrade. Not enough free space.
Optimization
NA
<SSL> certs invalid (error : <error>) - backing up to /tmp/certs_bak and recreating
Description: The SSL Certificates are invalid.
Optimization
NA
<NOProxy> has waited too long for GPStart
Description: A problem occurred while starting the optimization service; the WANJet appliance was unable to become active.
Optimization
1260
Error: Upgrade failed. Please contact F5 technical support team.
WANJet Management
1300
Error: Logging error
Description: The logging facility could not get error messages from the WANJet appliance.
Logs
1420
WCCP ServiceGroup (TCP) is up
WCCP
1421
WCCP ServiceGroup (UDP) is up
WCCP
1422
WCCP ServiceGroup (TCP) is down
WCCP
1423
WCCP ServiceGroup (UDP) is down
WCCP
1424
WCCP Configuration Error
WCCP
1425
WCCP Runtime Error
WCCP
1426
WCCP is not enabled on the router
WCCP




Table of Contents   |   << Previous Chapter   |   Next Chapter >>

Was this resource helpful in solving your issue?




NOTE: Please do not provide personal information.



Incorrect answer. Please try again: Please enter the words to the right: Please enter the numbers you hear:

Additional Comments (optional)