Applies To:

Show Versions Show Versions

Archived Manual Chapter: WANJet User Guide version 4.0: WANJet Appliance Private MIB - B
Manual Chapter
Table of Contents   |   << Previous Chapter

This article has been archived, and is no longer maintained.


B

WANJet Appliance Private MIB


System information

The system-related information path is:

.iso.org.dod.internet.private.enterprises.13993. = .1.3.6.1.4.1.13993.


The system-related information description is:

TotalSentBandwidthSavingPercent

TotalRecvBandwidthSavingPercent

TotalSentBeforeNetCelera

TotalSentAfterNetCelera

TotalRecvBeforeNetCelera

TotalRecvAfterNetCelera

LastSentBandwidthSavingPercent

LastRecvBandwidthSavingPercent

LastSentBeforeNetCeleraRate

LastSentAfterNetCeleraRate

LastRecvBeforeNetCeleraRate

LastRecvAfterNetCeleraRate

Ethernet card information

The Ethernet card-related information path is:

.iso.org.dod.internet.mgmt.mib-2.interfaces = .1.3.6.1.2.1.2

The Ethernet card related information description is:

IfNumber

ifTable.ifEntry.ifIndex

ifTable.ifEntry.ifDescr

ifTable.ifEntry.ifEnter

ifTable.ifEntry.ifMtu

ifTable.ifEntry.ifSpeed

ifTable.ifEntry.ifPhysAddress

ifTable.ifEntry.ifInOctets

ifTable.ifEntry.ifInUcastPkts

ifTable.ifEntry.ifInDiscards

ifTable.ifEntry.ifInErrors

ifTable.ifEntry.ifOutOctets

ifTable.ifEntry.ifOutUcastPkts

ifTable.ifEntry.ifOutDiscards

ifTable.ifEntry.ifOutErrors

MIB file

Following is the WANJet Private MIB file. You can use this file if you need to compile the MIB file in order to browse the MIB through the standard MIB browser. To use the WANJet Private MIB file, copy the following file into your SNMP-compliant software, and compile it. Refer to the documentation of your SNMP-compliant software for specific instructions.

SWANLABS-GLOBAL-REG DEFINITIONS ::= BEGIN

IMPORTS

enterprises FROM SNMPv2-SMI;

SwanLabs OBJECT IDENTIFIER

::= { enterprises 13993 }

NetCelera OBJECT IDENTIFIER

::= { SwanLabs 1}

ncVersion OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION

"The NetCelera software version"

::= { NetCelera 1 }

ncStatistics OBJECT IDENTIFIER

::= { NetCelera 2 }

ncSnmpTraps OBJECT IDENTIFIER

::= { NetCelera 3 }

-- ********************************************** ncStatistics

TotalSentBandwidthSavingPercent OBJECT-TYPE

SYNTAX INTEGER

ACCESS read-only

STATUS current

DESCRIPTION "Percent bandwidth saving on the traffic sent

to other NetCelera boxes today."

::= { ncStatistics 1 }

TotalRecvBandwidthSavingPercent OBJECT-TYPE

SYNTAX INTEGER

ACCESS read-only

STATUS current

DESCRIPTION "Percent bandwidth saving on the traffic

received from other NetCelera boxes today."

::= { ncStatistics 2 }

TotalSentBeforeNetCelera OBJECT-TYPE

SYNTAX INTEGER

ACCESS read-only

STATUS current

DESCRIPTION "Effective traffic sent

from this NetCelera Box to other NetCelera boxes

today in MB (before NetCelera)."

::= { ncStatistics 3 }

TotalSentAfterNetCelera OBJECT-TYPE

SYNTAX INTEGER

ACCESS read-only

STATUS current

DESCRIPTION "Optimized traffic sent

from this NetCelera Box to other NetCelera boxes

today in MB (after NetCelera)."

::= { ncStatistics 4 }

TotalRecvBeforeNetCelera OBJECT-TYPE

SYNTAX INTEGER

ACCESS read-only

STATUS current

DESCRIPTION "Effective traffic received

from other NetCelera boxes

today in MB (before NetCelera)."

::= { ncStatistics 5 }

TotalRecvAfterNetCelera OBJECT-TYPE

SYNTAX INTEGER

ACCESS read-only

STATUS current

DESCRIPTION "Optimized traffic received

from other NetCelera boxes

today in MB (after NetCelera)."

::= { ncStatistics 6 }

LastSentBandwidthSavingPercent OBJECT-TYPE

SYNTAX INTEGER

ACCESS read-only

STATUS current

DESCRIPTION "Percent bandwidth saving on the traffic sent

to other NetCelera boxes during the last five minutes.

This value may be plotted to create a chart."

::= { ncStatistics 7 }

LastRecvBandwidthSavingPercent OBJECT-TYPE

SYNTAX INTEGER

ACCESS read-only

STATUS current

DESCRIPTION "Percent bandwidth saving on the traffic received

from other NetCelera boxes during the last five minutes.

This value may be plotted to create a chart."

::= { ncStatistics 8 }

LastSentBeforeNetCeleraRate OBJECT-TYPE

SYNTAX INTEGER

ACCESS read-only

STATUS current

DESCRIPTION "The rate of effective traffic sent

from this NetCelera Box to other NetCelera boxes in Kbps

(before NetCelera).

This value may be plotted to create a chart."

::= { ncStatistics 9 }

LastSentAfterNetCeleraRate OBJECT-TYPE

SYNTAX INTEGER

ACCESS read-only

STATUS current

DESCRIPTION "The rate of real Optimized traffic sent

from this NetCelera Box to other NetCelera boxes in Kbps

(after NetCelera).

This value may be plotted to create a chart."

::= { ncStatistics 10 }

LastRecvBeforeNetCeleraRate OBJECT-TYPE

SYNTAX INTEGER

ACCESS read-only

STATUS current

DESCRIPTION "The rate of effective traffic received

from other NetCelera boxes in Kbps

(before NetCelera).

This value may be plotted to create a chart."

::= { ncStatistics 11 }

LastRecvAfterNetCeleraRate OBJECT-TYPE

SYNTAX INTEGER

ACCESS read-only

STATUS current

DESCRIPTION "The rate of real Optimized traffic received

from other NetCelera boxes in Kbps

(after NetCelera).

This value may be plotted to create a chart."

::= { ncStatistics 12 }

-- ********************************************** ncSnmpTraps

ncSnmpTrapObjs OBJECT IDENTIFIER

::= { ncSnmpTraps 1 }

ncSnmpTrapID OBJECT-TYPE

SYNTAX INTEGER

ACCESS read-only

STATUS current

DESCRIPTION "Holds the ID of the SNMP Trap."

::= { ncSnmpTrapObjs 1 }

ncSnmpTrapDescription OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Holds the description of the SNMP Trap."

::= { ncSnmpTrapObjs 2 }

ncSnmpTrapList OBJECT IDENTIFIER

::= { ncSnmpTraps 2 }

-- Optimization Engine Traps

ncTrap1000 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Error: Configuration error."

::= { ncSnmpTrapList 1000 }

ncTrap1001 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Error: Configuration error."

::= { ncSnmpTrapList 1001 }

ncTrap1002 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Error: Configuration error."

::= { ncSnmpTrapList 1002 }

ncTrap1003 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Error: Initialization error."

::= { ncSnmpTrapList 1003 }

ncTrap1004 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Error: Initialization error."

::= { ncSnmpTrapList 1004 }

ncTrap1005 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Error: Initialization error."

::= { ncSnmpTrapList 1005 }

ncTrap1006 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Error: Internal error."

::= { ncSnmpTrapList 1006 }

ncTrap1007 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Error: Internal error."

::= { ncSnmpTrapList 1007 }

-- Packet Processor Traps

ncTrap1100 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Error: Internal error."

::= { ncSnmpTrapList 1100 }

ncTrap1101 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Error: Internal error."

::= { ncSnmpTrapList 1101 }

ncTrap1102 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Error: Internal error."

::= { ncSnmpTrapList 1102 }

ncTrap1103 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Error: Internal error."

::= { ncSnmpTrapList 1103 }

ncTrap1150 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Maximum number of ACM5 connections reached.

(OR)

Maximum number of speed array connections for (RemoteIP) reached."

::= { ncSnmpTrapList 1150 }

-- ACM5 Traps

ncTrap1200 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Error: Configuration error."

::= { ncSnmpTrapList 1200 }

ncTrap1201 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Error: Configuration error."

::= { ncSnmpTrapList 1201 }

ncTrap1202 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Error: Initialization error."

::= { ncSnmpTrapList 1202 }

ncTrap1203 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Error: Initialization error."

::= { ncSnmpTrapList 1203 }

ncTrap1204 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Error: Internal error."

::= { ncSnmpTrapList 1204 }

ncTrap1205 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Error: Internal error."

::= { ncSnmpTrapList 1205 }

ncTrap1206 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Error: Internal error."

::= { ncSnmpTrapList 1206 }

ncTrap1207 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Error: Internal error."

::= { ncSnmpTrapList 1207 }

ncTrap1209 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Link down with (Proxy IP)."

::= { ncSnmpTrapList 1209 }

ncTrap1210 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Link up with (Proxy IP)."

::= { ncSnmpTrapList 1210 }

ncTrap1211 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Authentication failed with (Proxy IP)."

::= { ncSnmpTrapList 1211 }

ncTrap1212 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Error: Connection from unauthorized Proxy (Proxy IP)."

::= { ncSnmpTrapList 1212 }

ncTrap1213 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Error: Internal error."

::= { ncSnmpTrapList 1213 }

ncTrap1214 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Error: This version (%f) is incompatible with (Proxy IP) version (%f)."

::= { ncSnmpTrapList 1214 }

ncTrap1250 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Version (%f) up and running."

::= { ncSnmpTrapList 1250 }

ncTrap1251 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Error: Internal error."

::= { ncSnmpTrapList 1251 }

ncTrap1252 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Warning: License limit exeeded."

::= { ncSnmpTrapList 1252 }

ncTrap1253 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Warning: Invalid license key - Bandwidth optimization off."

::= { ncSnmpTrapList 1253 }

ncTrap1254 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Warning: License key not entered - Bandwidth optimization off."

::= { ncSnmpTrapList 1254 }

ncTrap1255 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Warning: x days remain for the evaluation license key to expire."

::= { ncSnmpTrapList 1255 }

ncTrap1256 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Warning: NetCelera is activated for evaluation for x days."

::= { ncSnmpTrapList 1256 }

ncTrap1257 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Warning: Evaluation license key expired."

::= { ncSnmpTrapList 1257 }

ncTrap1258 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Error: License violation - Bandwidth optimization stopped."

::= { ncSnmpTrapList 1258 }

-- Logging Traps

ncTrap1300 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Error: Logging Error."

::= { ncSnmpTrapList 1300 }

-- Speed Array Traps

ncTrap1400 OBJECT-TYPE

SYNTAX OCTET STRING

ACCESS read-only

STATUS current

DESCRIPTION "Maximum number of remote NetCelera machines reached.

Disabling Speed Array service for (Proxy IP)."

::= { ncSnmpTrapList 1400 }

END




Table of Contents   |   << Previous Chapter

Was this resource helpful in solving your issue?




NOTE: Please do not provide personal information.



Incorrect answer. Please try again: Please enter the words to the right: Please enter the numbers you hear:

Additional Comments (optional)