Applies To:

Show Versions Show Versions

Release Note: BIG-IP 11.2.0 LTM and TMOS Release Notes
Release Note

Original Publication Date: 03/18/2018


This release note documents the version 11.2.0 release of BIG-IP Local Traffic Manager and TMOS.


- Supported hardware
- Configuration utility browser support
- User documentation for this release
- New in 11.2.0
- New in 11.1.0
- New in 11.0.0
- Installation overview
     - Installation checklist
     - Installing the software
     - Post-installation tasks
     - Installation tips
- Upgrading from earlier versions
- Fixes in 11.2.0
- Fixes in 11.1.0
- Fixes in 11.0.0
- Behavior changes in 11.2.0
- Behavior changes in 11.1.0
- Behavior changes in 11.0.0
- Known issues
- Contacting F5 Networks
- Legal notices

Supported hardware

You can apply the software upgrade to systems running software versions 10.1.0 (or later) or 11.x. For a list of supported platforms, see SOL9412: The BIG-IP release matrix. For information about which platforms support which module combinations, see SOL10288: BIG-IP software and platform support matrix.

Configuration utility browser support

The BIG-IP Configuration Utility supports these browsers and versions:

  • Microsoft Internet Explorer 8.x and 9.x
  • Mozilla Firefox 15.0.x
  • Google Chrome 21.x

User documentation for this release

For a comprehensive list of documentation that is relevant to this release, refer to the BIG-IP LTM / VE 11.2.0 Documentation page.

New in 11.2.0

Google Chrome support

This release provides full support for current releases of the Google Chrome browser.

SPDY profile

With a special Early Access license, this release provides a Local Traffic Manager SPDY profile that you can use for evaluation and testing. This version of the SPDY profile is not intended for production use. Documentation for the options and settings of this profile can be found in the respective Traffic Management Shell (tmsh) man pages, the Traffic Management Shell (tmsh) Reference Guide, and the accompanying SPDY Implementations reference. Should you encounter any problems with this functionality, please contact your F5 Networks representative. Resolution of any software defects found in this version may appear in a future release. To acquire an Early Access license and the SPDY Implementations reference, please contact your F5 Networks account executive.

BEAST Exploit protection

In this release, TLS 1.1 support in hardware, provides additional protection against the BEAST Exploit vulnerability found in SSL 3.0/TLS 1.0.

IPv6 standards compliance

In this release, the BIG-IP IPv6 standards compliance has been improved.

DSC debugging tools

In this release, the cm module of tmsh includes a number of powerful tools for viewing information and statistics about the BIG-IP system and the traffic and device groups you have configured.

Transitioning between IP infrastructure supported

In this release, for L3 encapsulation tunnels, the BIG-IP system now supports mixed address types, that is, IPv6-in-IPv4 and IPv4-in-IPv6 encapsulations for transitioning between IP infrastructure. These mechanisms are represented by RFC4213 and RFC2473, respectively.

Terminating IPIP encapsulation tunnels supported

In this release, the BIG-IP system can now terminate encapsulation tunnels originating from third party devices, without you having to specify the IP address for every device.

DNS cache

In this release, you can configure a cache on the BIG-IP system to cache DNS responses. The next time the system receives a query for a response that exists in the cache, the system returns the response from the cache.

Customized SNMP MIBs

In this release, the BIG-IP system supports the creation of customized MIB entries using TCL commands to provide visibility to statistics and information that are not available through standard MIBs.

DHCP Relay renewal forwarding

In this release, DHCP Relay renewal traffic is handled by the DHCP Relay profile.

sFlow support

In this release, you can configure the BIG-IP system to poll internal data sources and send data samples to an sFlow receiver. (Currently, the BIG-IP system supports only counter sampling on only VLANs and interfaces.) You can use the collected data to analyze the performance of the BIG-IP system.

Provisioning and device version requirements for iApp templates

iApp templates can now check for installed BIG-IP modules, as well as set minimum and maximum BIG-IP versions, and warn users of missing modules and incompatible version use before deploying the template as an application service. Template authors can specify the required BIG-IP modules and the minimum and maximum BIG-IP versions in the Template Properties screen of the Configuration utility. Template validity is also indicated in the Validity column of the Template List.

Diameter monitor enhanced

In this release, enhancements have been made to improve Diameter monitor operation. To support graceful shutdown of a Diameter monitor session, a DPR is now sent after a CEA is received. If a CEA is not received, the BIG-IP system tears down the connection and does not send a DPR. From the BIG-IP system's point of view, the server is down. To resolve conflicts between active and standby units if the end-user configured origin-host creates conflicts, the BIG-IP system now adds the local box host name according to user configuration. The unique origin-host prevents detecting the wrong status caused by two units using the same origin-host because the server may accept only one connection from a single origin-host.

SCTP remote multi-homing

In this release, BIG-IP software supports SCTP remote multi-homing with multiple IP address for a single connection.

TCL packages for iApps and tmsh scripts

In this release, the BIG-IP system includes some common TCL packages. The iApps and tmsh scripts are now extensible through the standard TCL mechanisms. Note that these libraries are not available for use in iRules.

LDAP authorization enhanced to search for group membership

In this release, you can use LDAP membership as a part of remote role determination when you are assigning a role to a user of the BIG-IP system.

IPv6 support for the management port

In this release, you can use IPv6 addresses for the BIG-IP system management interface.

Private per-object metadata

In this release, using tmsh or iControl, you can define metadata and retrieve user-defined metadata for certain BIG-IP LTM and GTM configuration objects, including virtual addresses and iApp application services. This metadata is in the form of a string key-value pair, as well as a Boolean value that indicates whether the key should be persisted or is ephemeral.

Memory usage improvement

In this release, the BIG-IP system Configuration utility memory usage has been improved.

SCTP support

In this release, the BIG-IP system supports SCTP per RFC 2960.

B4300 enhancement

In this release, vCMP Guest access to hardware SSL and compression resources has been enhanced on the B4300 blades.

HTTP to HTTPS redirect option for the Configuration utility

In this release, you can configure the BIG-IP system to redirect HTTP requests for the BIG-IP system Configuration utility to HTTPS.

BIG-IP IPsec certification

For this release, BIG-IP IPsec was certified by ICSA. iControl now supports IPsec.

VMware vCloud Director support

In this release, BIG-IP Virtual Edition supports VMware vCloud Director.

% notation hiding on default RD-enabled

The BIG-IP route domains feature includes the concept of default route domains, to minimize the need for you to specify the %<ID> notation. When you designate a route domain as the default route domain in a partition, any BIG-IP system objects (such as node addresses) in that partition that do not include the %<ID> notation in their IP addresses are automatically associated with the default route domain.

iRules support for protocols with separate data channel

In this release, you can specify existing iRules that you want the virtual server to apply to the data channel of FTP or RTSP traffic. Additionally, this feature can provide byte counts for all of the supported protocols (FTP, RTSP, and so on) that have either separate data channels or hierarchically organized data channels. This feature is available when you have assigned an FTP or RTSP profile to a virtual server.

Targeted traffic group failover

When you force a traffic group into a standby state, you can choose the specific device to which the traffic group fails over, if the device group has more than two members. Forcing a traffic group into a standby state causes the traffic group to become active on the selected device.

Multiple route domains for Advanced Routing Modules supported

In this release, for each route domain on the BIG-IP system (including route domain 0), you can enable one or more dynamic routing protocols. For example, you can enable BGP4 and OSPFv3 on a specific route domain. When you enable dynamic routing on a specific route domain, the BIG-IP system creates a dynamic routing instance. This dynamic routing instance is made up of the core dynamic routing daemons (imi and nsm), as well each relevant dynamic routing protocol daemon.

SIP OneConnect

In this release, the SIP OneConnect feature allows connection flow reuse between inbound and outbound virtual servers for UDP connections. This feature addresses common SIP client behavior where source and destination ports are both 5060. See the BIG-IP LTM Concepts Guide for more details about how to implement SIP OneConnect.

IP intelligence

In this release, you can use iRules to determine the reputation of an IP address and operate based on that reputation. The IP reputation database is regularly updated, and contains the following categories:

  • Windows Exploits: IP addresses that have exercised various exploits against Windows resources using browsers, programs, downloaded files, scripts, or operating system vulnerabilities.
  • Web Attacks: IP addresses that have launched web attacks of various forms.
  • Botnets: IP addresses representing compromised computers on the Internet that are now part of a botnet (machines that send spam messages, launch various attacks, or behave in other unpredictable ways).
  • Scanners: IP addresses that have been observed to scan ports or networks, typically to identify vulnerabilities for subsequent exploits.
  • Denial of Service: IP addresses that have launched denial of service attacks, often requests for legitimate services, but which occur at such a fast rate that targeted systems cannot respond and become overloaded or unable to service legitimate clients.
  • Reputation: IP addresses that issue HTTP requests with a low average reputation, or that request only known malware sites.
  • Phishing: IP addresses associated with phishing websites (sources that attempt to acquire information such as user names, passwords, and credit card details by masquerading as a trustworthy entity).
  • Proxy: IP addresses associated with web proxies, which can be used to conceal an attacker's identity.
  • Network: Networks (/24) in which the majority of IP addresses have exhibited suspicious behavior.

You can configure the system to reject a request from IP addresses in a specific reputation category. To enable this feature, run the command tmsh modify sys db iprep.autoupdate value enable. To disable this feature, run the command tmsh modify sys db iprep.autoupdate value disable. To look up the reputation of a specific IP address, run the command iprep_lookup <IP address>. For this release, only IPv4-formatted IP addresses are supported. A free 30 day evaluation of the IP intelligence service is available.

New in 11.1.0

IPv6 to IPv4

In this release, you can configure the BIG-IP Local Traffic Manager (LTM) to load balance IPv6-only client connection requests to IPv4-only servers on your network by returning an AAAA record response to the client.

Route Domains for IPv6

In this release, Route Domains support IPv6, providing the same capabilities of IPv4, including strict isolation between route domains and overlapping IP addresses, as well as support of a single route domain for both IPv4 and IPv6 virtual servers in the same route domain.

Analytics Enhancements

In this release, analytics:
  • Support IPv6
  • Support VIPRION platforms
  • Work in vCMP
  • Support statistics in TMSH
  • Store AVR statistics in the iStats library
  • Support configuration through iControl
  • Support iRule hooks

Virtual Edition

This release adds Microsoft Hyper-V (Lab only) and Citrix XenServer support in addition to VMware vSphere for all BIG-IP Virtual Editions (Local Traffic Manager, Access Policy Manager, Application Security Manager, Edge Gateway, Global Traffic Manager, WebAccelerator, and WAN Optimization Manager).

iRule Commands Referencing External Files (iFiles)

In this release, you can use an iRule to get external content or files and present the results.

Digitally Signed iRules

In this release, you can digitally sign iRules, providing the ability to verify that an iRule has not changed since it was signed by the author. You can now verify downloaded and imported iRules, as well as iRules that are deployed across an organization. If the verification test fails, the iRule will not load, thus protecting the user from any unknown changes. If necessary, a user can override this option and load the iRule even if verification fails.

iRule Editor Role

In this release, an iRule Editor Role provides the ability to create and modify new iRules, while preventing the ability to assign an iRule to a new virtual server unless that iRule was previously assigned.

Cryptographic Operations for iRules

In this release, iRules support encryption and decryption of data that is compatible with external devices. iRules support includes the following ciphers:

  • RC4
  • DES
  • 3DES
  • AES
Additionally, iRules support includes the following encryption modes:
  • ECB
  • CBC
  • CTR

DNS iRules

DNS iRules provide fully customizable intelligent DNS. The new DNS iRules commands are applied to the DNS listener and triggered by the DNS_REQUEST and DNS_RESPONSE events. They require a DNS profile and are enabled as part of the Global Traffic Manager module or the new DNS add-on bundle for Local Traffic Manager. DNS iRules adds commands useful for modifying and inspecting DNS packets. Capabilities include: manipulating (read/modify) DNS queries, DNS resource records (RR), and DNS responses. Additional commands provide the ability to control DNS flow by dynamically enabling and disabling DNS features. DNS iRules make it easy to implement DNS filtering, query logging, and other DNS firewall use cases.

You can find extensive information about iRules on the F5 DevCentral web site.

Link Layer Discovery Protocol

In this release, Network Management Systems use Link Layer Discovery Protocol (LLDP) to identify and map the physical topology of a network, which is useful in the troubleshooting and orchestration of the network. The BIG-IP system can provide the following information by using LLDP:
  • Chassis ID
  • Port ID
  • TTL
  • Port Description
  • System Name
  • System Description
  • System Capabilities
  • Management Address
  • Port VLAN ID (untagged VLAN ID)
  • Port and Protocol VLAN ID
  • VLAN Name (complete list of tagged/untagged VLANs)
  • Protocol Identity
  • Link Aggregation
  • Maximum Frame Size
  • Product Model

SSL SAN Certificates

In this release, you can manage SSL Certificates by means of TMSH and the BIG-IP Configuration utility.

Transport Layer Security Server Name Indication

This release supports Transport Layer Security (TLS) Server Name Indication (SNI) in the SSL Stack.

TMSH Shared Alias File

In this release, aliases are stored in the configuration, making content accessible to other users on the BIG-IP system. You can create aliases for scripts or define a standard for consistent use.

BIG-IP nPath Encapsulation Tunneling to Pool Members

In this release, you can establish encapsulation tunnels from a BIG-IP system to backend pool members. This is an enhancement to nPath. We now offer IP Tunnel (L3) Encapsulation in nPath to pool members. This functionality supports IPv4 and IPv6 addresses. You can configure BIG-IP Encapsulation Tunneling by means of TMSH and iControl, enabling encapsulation for a pool and disabling encapsulation by pool member.

Dynamic Host Configuration Protocol Relay

In this release, the BIG-IP system introduces the Dynamic Host Configuration Protocol (DHCP) Relay virtual server, providing the ability to proxy DHCP requests between VLANs.

Jumbo Frame Support

This release provides 1800-byte frame support on: BIG-IP 3900, 6900, 89x0, and 110x0 platforms, and on B4100 (PB100) and B4200 (PB200) blades. This release also provides 9198-byte frame support on B2100-bladed BIG-IP 2400 chassis.

NTLM/NTLMv2 Authentication Support for HTTP/HTTPS Monitors

For an HTTP/HTTPS monitor to successfully use NTLM or NTLMv2 authentication, a monitor must meet the following configuration requirements:
  • The monitor must have a send string. Because it is necessary to use HTTP version 1.1, the send string must be, at minimum: "GET /<optional file name/path> HTTP/1.1\r\nHost: <host name of website>"
  • The monitor must have a receive string.
  • The monitor cannot be a reverse monitor.
  • The monitor must have a username. The user name may be either a simple username or it can be the domain/username. Both '\' and '/' are recognized.
  • The monitor must have a password.
Once this monitor is associated with a pool or pool member, it only enacts NTLM if the request with Basic Auth gets a 401 response with a WWW-Authenticate header set to NTLM. At this point the NTLM handshake should commence. Here is an example monitor:
ltm monitor http /Common/http_testauth { defaults-from /Common/http destination *:* interval 5 password default recv 200 OK send "GET / HTTP/1.1\\r\\nHost:" time-until-up 0 timeout 16 username AUTHTEST/administrator }

Note that the domain, in this case AUTHTEST, must be capitalized for authentication to be successful.

New in 11.0.0

Device Service Clustering

In this release, the Traffic Management Operation System (TMOS) within the BIG-IP system includes an underlying architecture that allows you to create an N+1 redundant system configuration, known as device service clustering (DSC). This redundant system architecture provides both synchronization of multiple BIG-IP configuration data and high availability at user-defined levels of granularity.


In this release, you can create customized templates to quickly and easily deploy applications on your network. iApps allow creation of application-centric configuration interfaces on BIG-IP systems, reducing configuration time and increasing accuracy of complex traffic management configurations.


This release provides Analytics, a module that provides application visibility and reporting capabilities. Using this module, you can analyze performance of web applications by viewing detailed metrics for applications, virtual servers, pool members, URLs, and specific countries. You can also view detailed statistics about application traffic running through the BIG-IP system.

Diameter Enhancements

In this release, BIG-IP Local Traffic Manager (LTM) load balances and persists requests that applications send to servers running Diameter services. The BIG-IP system can also monitor each server to ensure that the Diameter service remains up and running.

IPv4-to-IPv6 Gateway

In this release, BIG-IP LTM functions as an IPv4-to-IPv6 gateway. You configure the radvd service to send out ICMPv6 routing advisory messages, and to respond to ICMPv6 route solicitation messages. This allows the BIG-IP system to support auto-configuration of downstream nodes, and the downstream nodes to automatically discover that the BIG-IP system is their router. Note that in version 11.1.0 and later, the radvd daemon has been removed and its functionality moved into TMOS. That means that instead of configuring the radvd daemon, you configure route advertisements using tmsh. See the 'net router-advertisement' section of the tmsh manual or the tmsh command-line help for information.

TCP Request Queuing in Pools

In this release, TCP request queuing provides the ability to queue connection requests that exceed the capacity of connections for a pool, pool member, or node, as determined by the connection limit. Consequently, instead of dropping connection requests that exceed the capacity of a pool, pool member, or node, TCP request queuing enables those connection requests to reside within a queue in accordance with defined conditions until capacity becomes available.

Certificate Administrator Role

This release provides a Certificate Administrator Role. A user that is assigned this role can only manage SSL certificates.

Per Module Statistics

In this release, you can view "real-time" CPU and memory usage statistics for individual modules.

Per Virtual Server Statistics

In this release, you can view "real-time" profile and CPU usage statistics for individual virtual servers.

Out of Band TCP Connections

This release provides the ability to establish out of band TCP Connections from an iRule.

Read and Write Access to TCP Options

This release provides read and write access to the TCP options field using iRules.

You can find extensive information about iRules on the F5 DevCentral web site.

SNMP Support for Dynamic Routing Protocols

This release provides SNMP support for ZebOS dynamic routing protocols.

tmsh Description Field for Configurable Components

In this release, there is a Description field available for configurable tmsh components.

TLS 1.2 Support

This release supports Transport Layer Security (TLS) 1.2, the SHA 2 Cipher, and SHA256 hash.

Request Logging Profile

The new Request Logging profile enables configuration log entries to be reported when requests/responses are received, supports audit logging of HTTP/decrypted HTTPS requests/responses, and enables specification of a response to be issued when an specific requests/responses occur. For example, the system uses this response when you enable Respond On Error to suggest a retry, or to redirect the browser to an alternate page. Although there are no specific examples in the online help that describe how to craft Template and Error Template entries, you can find a table of supported parameters in the BIG-IP WebAccelerator System: Implementations guide on AskF5.

Version 11.0.0 Documentation

This release provides an enhanced documentation paradigm for Local Traffic Manager, Global Traffic Manager, and Link Controller. Concept guides and implementation guides replace the former configuration guides. This change helps make information more accessible and more task-focused, which improves the user experience and enhances usability.

Proxy SSL Support

This release provides Proxy SSL support in Client SSL and Server SSL profiles, which enables direct client-server authentication. You can find information about Proxy SSL in the Big-IP Local Traffic Manager: Implementations guide on AskF5.

Installation overview

This document covers very basic steps for installing the software. You can find complete, step-by-step installation and upgrade instructions in BIG-IP Systems: Upgrading Active-Standby Systems and BIG-IP Systems: Upgrading Active-Active Systems, and we strongly recommend that you reference these documents to ensure successful completion of the installation process.

Installation checklist

Before you begin:

  • Use BIG-IP iHealth to verify your configuration file. For more information, see SOL12878: Generating BIG-IP diagnostic data using the qkview utility (10.x - 11.x).
  • Update/reactivate your system license, if needed, to ensure that you have a valid service check date.
  • Ensure that your system is running version 10.1.0 or later and is using the volumes formatting scheme.
  • Download the .iso file (if needed) from F5 Downloads to /shared/images on the source for the operation. (If you need to create this directory, use the exact name /shared/images.)
  • Configure a management port.
  • Set the console and system baud rate to 19200, if it is not already.
  • Log on as an administrator using the management port of the system you want to upgrade.
  • Boot into an installation location other than the target for the installation.
  • Save the user configuration set (UCS) in the /var/local/ucs directory on the source installation location, and copy the UCS file to a safe place on another device.
  • Log on to the standby unit, and only upgrade the active unit after the standby upgrade is satisfactory.
  • Turn off mirroring.
  • If you are running Application Acceleration Manager, set provisioning to Minimum.
  • If you are running Policy Enforcement Manager, set provisioning to Nominal.
  • If you are running Advanced Firewall Manager, set provisioning to Nominal.

Installing the software

You can install the software at the command line using the Traffic Management shell, tmsh, or in the browser-based Configuration utility using the Software Management screens, available in the System menu. Choose the installation method that best suits your environment.
Installation method Command
Install to existing volume, migrate source configuration to destination tmsh install sys software image [image name] volume [volume name]
Install from the browser-based Configuration utility Use the Software Management screens in a web browser.

Sample installation command

The following command installs version 11.2.0 to volume 3 of the main hard drive.

tmsh install sys software image BIGIP- volume HD1.3

Post-installation tasks

This document covers very basic steps for installing the software. You can find complete, step-by-step installation and upgrade instructions in BIG-IP Systems: Upgrading Active-Standby Systems and BIG-IP Systems: Upgrading Active-Active Systems, and we strongly recommend that you reference these documents to ensure successful completion of the installation process.

After the installation finishes, you must complete the following steps before the system can pass traffic.
  1. Ensure the system rebooted to the new installation location.
  2. Use BIG-IP iHealth to verify your configuration file. For more information, see SOL12878: Generating BIG-IP diagnostic data using the qkview utility (10.x - 11.x).
  3. Log on to the browser-based Configuration utility.
  4. Run the Setup utility.
  5. Provision the modules.
  6. Convert any bigpipe scripts to tmsh. (Version 11.x does not support the bigpipe utility.)
Note: You can find information about running the Setup utility and provisioning the modules in the BIG-IP TMOS implementations Creating an Active-Standby Configuration Using the Setup Utility and Creating an Active-Active Configuration Using the Setup Utility.

Installation tips

  • The upgrade process installs the software on the inactive installation location that you specify. This process usually takes between three minutes and seven minutes. During the upgrade process, you see messages posted on the screen. For example, you might see a prompt asking whether to upgrade the End User Diagnostics (EUD), depending on the version you have installed. To upgrade the EUD, type yes, otherwise, type no.
  • You can check the status of an active installation operation by running the command watch tmsh show sys software, which runs the show sys software command every two seconds. Pressing Ctrl + C stops the watch feature.
  • If installation fails, you can view the log file. The system stores the installation log file as /var/log/liveinstall.log.

Upgrading from earlier versions

Your upgrade process differs depending on the version of software you are currently running.

Warning: Do not use the 10.x installation methods (the Software Management screens, the b software or tmsh sys software commands, or the image2disk utility) to install/downgrade to 9.x software or operate on partitions. Depending on the operations you perform, doing so might render the system unusable. If you need to downgrade from version 10.x to version 9.x, use the image2disk utility to format the system for partitions, and then use a version 9.x installation method described in the version 9.x release notes to install the version 9.x software.

Upgrading from version 10.1.0 (or later) or 11.x

When you upgrade from version 10.1.0 (or later) or 11.x software, you use the Software Management screens in the Configuration utility to complete these steps. To open the Software Management screens, in the navigation pane of the Configuration utility, expand System, and click Software Management. For information about using the Software Management screens, see the online help.

Upgrading from versions earlier than 10.1.0

You cannot roll forward a configuration directly to this version from BIG-IP version 4.x, or from BIG-IP versions 9.0.x through 9.6.x. You must be running version 10.1.0 software. For details about upgrading to those versions, see the release notes for the associated release.

Automatic firmware upgrades

If this version includes new firmware for your specific hardware platform, after you install and activate this version, the system might reboot additional times to perform all necessary firmware upgrades.

Fixes in 11.2.0

ID Number Description
ID 223810 Moved Records Per Screen, Start Screen, Default System Settings, Display Hostnames When Possible, Statistics Format, and Screen Refresh Interval fields to BigDB, allowing them to be saved and restored via UCS actions.
ID 223904 The BIG-IP provides AES encryption via HTTP profile settings and iRules commands. Besides encryption, the feature handles authentication and tamper-detection. There are important fixes and performance improvements to those features in this version.
ID 224113 The BIG-IP provides AES encryption via HTTP profile settings and iRules commands. Besides encryption, the feature handles authentication and tamper-detection. There are important fixes and performance improvements to those features in this version.
ID 225445 SSL handshakes with large, but RFC-compliant, messages (for example, large certificate chains) are now correctly handled by the BIG-IP.
ID 225550 When a pool member or node address that has been forced down (user-down) is loaded from the config file health checks for that pool member or node address will be disabled. This will not be true for pool members if the same pool member is present in another pool that has the same monitor. In that case health checks will be enabled.
ID 226185 The sod process is now more resilient to malformed traffic on the High Availability channel connection.
ID 226923 Binary data stored in the session cache is now encoded and decoded correctly.
ID 247192 SNMP Version 3 trap configuration objects will not roll forward from a previous software version. You will need to recreate those objects after the upgrade is completed.
ID 248019 The system no longer posts the benign error 'Internal error, duplicate configuration elements refer to the same persistent config' in response to syslog remote server logs during log rotation.
ID 249012 "With this bug fixed, now log command can take either ip address or facility as its argument. Example: log ""Hello"" log local0. ""Hi"""
ID 347070 When you are using IPsec between a BIG-IP pair, it is no longer necessary to enable the Passive setting for the IKE peer on the server-side BIG-IP device.
ID 350888 Either IPv4 or IPv6 addresses are accepted for the management port. Netmask may be entered either as part of the IP address using a prefix or by selecting a prefix or a netmask or by typing in a netmask.
ID 352153 "Two new flags have been introduced to the HTTP::cookie iRule command: 1. when ""-detected"" is used, it will return a string describing the actual cookie version as detected by BIG-IP. Some possible values are: Netscape, RFC2109 and RFC2965. 2. When ""-declared"" is used, the existing behavior is maintained, which is to return the version as declared by the cookie header itself"
ID 354014 HTTP HEAD requests to virtual servers with OneConnect profiles no longer fail to load-balance subsequent HTTP requests on the same TCP connection.
ID 355754 The syslog include command now validates configuration changes before they're added to the syslog-ng.conf. An invalid configuration change is prevented from being added.
ID 355813 The BIG-IP provides AES encryption via HTTP profile settings and iRules commands. Besides encryption, the feature handles authentication and tamper-detection. There are important fixes and performance improvements to those features in this version.
ID 359867 You can now flush Security Associations (SAs) using tmsh.
ID 361911 The BIG-IP provides AES encryption via HTTP profile settings and iRules commands. Besides encryption, the feature handles authentication and tamper-detection. There are important fixes and performance improvements to those features in this version.
ID 361912 The BIG-IP provides AES encryption via HTTP profile settings and iRules commands. Besides encryption, the feature handles authentication and tamper-detection. There are important fixes and performance improvements to those features in this version.
ID 361914 The BIG-IP provides AES encryption via HTTP profile settings and iRules commands. Besides encryption, the feature handles authentication and tamper-detection. There are important fixes and performance improvements to those features in this version.
ID 363467 The defaults-from property is now specified, if it was not specified on an authentication profile in the 10.x configuration.
ID 363483 Deletion of the tmsh component 'net ipsec ike-daemon' is no longer allowed.
ID 364378 Properties with substitution variables are no longer overwritten via the GUI. An 'Other..' selection now exists in the drop-down box.
ID 365106 Invalid Configsync.password message no longer occurs when loading a saved UCS file.
ID 366090 The HTTP compression profile now correctly determines how to compress content (that is, it uses "compress text content"). In addition, the system no longer inserts a superfluous Vary: Accept-Encoding HTTP header of responses when compression is not configured.
ID 366918 VIPRION 2400 blades now compute IPv6 checksums in hardware
ID 368308 The failover daemon (sod) no longer triggers the link-down-on-standby feature when resolving the situation where more than one device is active.
ID 369163 Previously, when a SASP monitor had marked pool members and the parent pool as UP, and then the backend GWM goes away, the /var/tmp/saspd.log and /var/log/ltm log show the GWM is unavailable, but the pool and its members remain UP. The pool members are now correctly marked down if the GWM is unreachable.
ID 369257 TMM no longer leaks memory for Content Revocation List data structures when system configuration loads occur.
ID 369293 Remotely authenticated admin users are now able to save configurations and run commands such as tcpdump and qkview without errors.
ID 369615 There is no longer a limitation on the number of traffic selectors.
ID 369841 In this release, the system first uses the configured DNS when resolving the licensing server, which resolves issues related to Automatic activation using a list of root name servers that might be blocked.
ID 370007 Additional information is now logged when MPI connections are lost in a chassis, which can help in debugging MPI problems.
ID 370406 A previous issue that was triggered when BGP was restarted has been corrected. Aggregation is applied only after all route-maps are loaded.
ID 370525 Device group sync validation errors will now be correctly reported.
ID 370572 Profile search now follows the conventional object search methodology which is used on pool, virtual server, rule, etc.
ID 370787 TMM no longer leaks "ssl(variable)" memory when iRules select SSL profiles that are not directly attached to any virtual server.
ID 371298 clientssl profiles with Client Cert set to "require" and Frequency set to "always" no longer cause incorrect SSL session IDs to be sent to the client.
ID 371369 The kernel clock source has been adjusted to eliminate jitter encountered with periodic alarms.
ID 371677 The system no longer goes into an inoperative state when restarting only the mcpd daemon in certain circumstances.
ID 371793 Removing a SASP monitor from a pool and shutting down the GWM no longer allows the saspd daemon to continuously retry connection attempts.
ID 371832 SASPD no longer cores after stopping the GWM, removing the monitor, adding the monitor back, and re-starting the GWM.
ID 371862 While the SASP GWM is running and pool members are up, removing the monitor no longer causes continuous "err mcpd: monitor instance not found" log messages.
ID 371881 When SASP GWM loses connection then reconnects, the pool members that are being monitored are now correctly polled upon reconnection.
ID 371940 "The config-sync operation on one side of the HA pair no longer incorrectly resets the interface configuration on the remote side. The customized interface configuration is now left intact and the configuration is not included in the config sync operation."
ID 371949 Black-hole routes inserted to the TMOS route table by dynamic routing protocols (Advanced Routing Modules) are no longer ignored by TMMs. The ignored routes were being correctly inserted to the host (Linux) route table and were correctly displayed in tmsh, but had no effect on traffic passing through TMMs. This has been corrected.
ID 371952 Dynamically learned blackhole routes are now correctly deleted from the TMOS route table.
ID 372061 Remote role definitions created from the GUI are now properly saved to a configuration file.
ID 372140 When BGP dynamic routing is configured and a route-map not setting route next-hop is used for outbound filtering, the BGP Advanced Routing Module no longer sends an incorrect (all zeroes) next-hop in route updates.
ID 372237 The TMM no longer crashes when attempting to reselect after a node failure. This was previously occurring on a virtual server configured with a FastL4 profile and a pool configured with the option "action-on-service-down" set to reselect.
ID 372238 The TMM will no longer experience occasional restarts when an RTSP or FTP data connection happens to be initiated first by the server.
ID 372241 An error no longer occurs when rolling forward a configuration from a pre-v11.x system that contains a route domain configured with a parent id. The configuration was previously and incorrectly converting the "parent id" variable to a "parent name" variable, which caused a configuration load failure on initial startup.
ID 372275 The active/standby determination for an HA group no longer incorrectly results in all devices in standby state. Additional adjustments have been made to prevent a tie in the HA status.
ID 372590 BIND has been updated to 9.6-ESV-R5-P1 to mitigate CVE-2011-4313.
ID 372618 The virtual-disk parameter vdisk now can be specified without the ".img" extension. If vdisk is given without ".img" extension, the system automatically appends the extension to the file name. If there exists a vdisk with this name, the system correctly posts an alert.
ID 372667 Iterating headers in requests for policy matching now pass negative numbers correctly, so policy node matching can complete successfully.
ID 372679 Corrections have been made to prevent the TMM from coring during DTLS renegotiation.
ID 372726 Memory and packets are no longer leaked if there is an internal error sending a packet through a tunnel. This was only known to happen when using IPsec with jumbo Ethernet frames.
ID 372804 The internal High Speed Bridge interfaces on the BIG-IP 2400 platform no longer cease to pass traffic under certain conditions.
ID 372864 A processing error for SSL-enabled virtual servers, which could cause TMM to core and restart under certain conditions, has been fixed.
ID 373174 Users may now paste configuration list output in TMSH and successfully load the configuration.
ID 373222 Adjustments have been made in the ProxySSL and SNI hash handling code to prevent occasional memory leaks.
ID 373250 Fixed an issue with Proxy SSL. We now correctly scan multiple messages in the same record during handshake and process each one.
ID 373315 Adjustments have been made in the ProxySSL and SNI hash handling code to prevent aborted flows and tmm crashes.
ID 373388 When a SASP monitor is removed from pool, and the GWM is stopped, adding the monitor back and restarting the GWM now correctly begins continuous polling.
ID 373404 Opening the Dashboard in the GUI no longer causes excessive logging to /tmp/rrdstats.log and a potential to fill up the host filesystem.
ID 373469 The LCD now displays the correct status when an active unit is rebooted.
ID 373486 Stopping and restarting the SASP GWM no longer generates cores.
ID 373513 Previously, when renewing or importing an SSL certificate associated with one SSL virtual, all other SSL virtuals were using the updated certificate. This incorrect behavior has been fixed.
ID 373747 TMM no longer cores and restarts under certain conditions while processing specific HTTP::header or CACHE::header iRule commands.
ID 373827 With multiple devices in a device group, the saspd daemon no longer generates cores in any of the devices in the device group when a SASP monitor is removed from a pool and replaced.
ID 374025 The tmm periodically receives traffic stats from HSB hardware for each ePVA-assisted connection and updates its traffic volume by comparing with the previously received traffic stats. In previous releases, tmm did not properly save the previous traffic stats, thus causing the wrong traffic volume computation. In this release, the traffic statistics from HSB hardware for each ePVA-assisted connection are correctly calculated.
ID 374065 High CPU utilization for Big3d no longer occurs during a device group sync between an HA pair configuration contains a large number of objects while EM collecting statistics.
ID 374176 There is no longer an issue where CPU utilization spikes when a sync-failover device group and a large datagroup file are configured.
ID 374185 TMM no longer leaks memory when an iRule issues "SSL::cert issuer" commands.
ID 374305 Creating self IPs with IPv6 and route domains configured are now less restrictive and no longer restricts tmm-only listeners configured for use on the backplane as was the behavior on prior releases.
ID 374347 When importing an iApp template, the user-configurable option to overwrite an existing template or not, is now correctly honored.
ID 374390 "HTTP_RESPONSE iRules that access HTTP::status caused a Tcl exception when executed on an early response. An early response is an HTTP response that arrives before the request has finished; this something that can happen on requests with a body (e.g. POST requests)."
ID 374428 A previous CPU statistics issue has been corrected by introducing a new method for calculating the CPU idle time.
ID 374457 When viewing the pools for a configured wideip in the GUI that contains a wildcard character (such as *, the pools for that wideip now display correctly.
ID 374603 You can now use the db variable IPsec.ICSAForceIPFrag to configure IPsec in networks that require an MTU size that is smaller than regular IP packets.
ID 374609 IPsec now logs sufficient details to describe the reason for packet rejection.
ID 374685 Virtual servers with clientssl profiles now correctly accept client certificates signed with SHA2-based hash algorithms for TLS1.2 sessions.
ID 375089 An iRule using the table command in a DIAMETER_EGRESS event now works correctly. Essentially, the Diameter core protocol is peer based so the semantic for server has been adjusted.
ID 375335 Local Traffic Manager and Global Traffic Manager https monitors no longer cause the bigd or big3d processes to leak memory when configured to send client certificates to their target servers.
ID 375490 "The following messages no longer appear in the console when PXE booting some blades: /etc/rc.sysinit: line 8: /sbin/klogd: No such file or directory rm: cannot remove '/workspace.reservation.bin': No such file or directory"
ID 375590 Intermittent routing failures with an IPsec deployment in a redundant or HA configuration have been fixed.
ID 375992 Configuration validation has been added to protect against deleting tunnel objects that are referenced by virtual servers.
ID 376116 Installing a FIPS key into a device using the "tmsh install sys crypto" command no longer produces the error message "The requested unknown (/Common/fips117.key) already exists in partition Common." when the key object already exists in the configuration.
ID 376227 Route advertisement now works for Virtual Addresses that are assigned to a traffic group of "none".
ID 376433 Configurations which contain VLANs with an MTU of more than 1500 now correctly load and handle jumbo frames after an upgrade from an earlier release.
ID 376538 The LCD panel now works correctly after performing a bigstart restart.
ID 376554 The sod process is now more resilient to malformed traffic on the High Availability channel connection.
ID 376758 SNMP traps for bigipNotifyObjMsg events from the F5-BIGIP-COMMON-MIB no longer omit the values for bigipNotifyObjNode and bigipNotifyObjPort. For example, pool member monitor status traps now correctly display the affected user-assigned name or IP address and port of the pool member.
ID 376984 "The following messages are no longer erroneously logged to /var/log/racoon.log under normal circumstances: ERROR: failed to recv from pfkey (Inappropriate ioctl for device) ERROR: failed to recv from pfkey (Resource temporarily unavailable) INFO: socket # hung up or read error. Close socket ERROR: invalid policy type. ERROR: libipsec failed pfkey open: Success ERROR: unknown AF: 0 ERROR: no socket matches address family 2"
ID 377006 A memory leak which would occur while mirroring traffic from a Standard (L7) virtual server has been corrected.
ID 377175 "TMM no longer restarts with the following log message when mistakenly using a TCP iRule command on an SCTP virtual server, or under certain conditions when executing a TCP::release command in a CLIENT_DATA event: Assertion ""Neither pending nor enqueued."" failed. Assertion ""tclrule ctx not in progress"" failed."
ID 377230 The watchdog mechanism no longer experiences false-positives and now applies to all platforms. The message in /var/log/tmm has been changed to "Octeon watchdog timeout at <n> ticks: no new work accepted since <m> ticks." This message indicates a genuine h/w or s/w failure that locks up the device or driver. The consequent consumer messages "provider not responding" will still occur, but the message in the tmm0 log gives an earlier indication closer to the source of the problem. The providers are all TMMs in the hypervisor on vCMP and all TMMs on LTM, but the watchdog and message are only active in the lowest numbered TMM that attaches each octeon device (tmm0 on most platforms). The consumers are in the guest on vCMP and all tmms on LTM.
ID 377359 Added a new DB variable, ipsec.disablepfs, to allow disabling of PFS in phase 2.
ID 377400 The performance of saving or listing large Global Traffic Manager configurations has been improved.
ID 377449 Content Based Routing iRule now returns the correct values.
ID 377505 When enabling timing for iRules that execute commands that temporarily suspend execution (such as 'after', 'table', 'persist'), the iRule's CPU cycle statistics will no longer report excessively large and incorrect values.
ID 377540 A new version of fipskey export has been added to allow customers to recover .exp files from the FIPS device.
ID 377842 HTTP Redirect Rewrite now correctly handles the case where the server-side Location: header is shorter than the URI to be rewritten. This avoids the following panic: 'Assertion "size maps to buffer cache of equal or greater buffer size" failed'.
ID 378093 tmsh no longer displays incorrect values for historical performance statistics. For example, the following command should display accurate numbers for current and historical data:
  • tmsh show sys performance throughput historical
ID 378172 Dashboard CPU usage was incorrect on multi-blade systems. It would spike to 100% because stats from all blades were added together before the rates were calculated.
ID 378487 Virtual servers of type DHCP Relay now correctly work with Clustered Multi-Processing.
ID 378505 The rsyncd daemon no longer attempts reverse-lookup on config-sync IP addresses during the config-sync process, thus avoiding possible timeouts during name resolution.
ID 378743 An invalid assumption in the HTTP parser where attributes precede cookie names has been corrected. Previously, certain legal cookies could lead to a core.
ID 378990 The SSL Certificate Common Name is now parsed correctly as the first CN listed in RFC2253 format.
ID 379000 "Remotely authenticated users are now able to set cli preferences and create private aliases. Prior to this, errors such as the following would have been seen: bigip@(p4-019)(cfg-sync Standalone)(/S4-green-P:Active (/Partition One)(tmos)# modify cli preference stat-units raw 01071507:3: User, testuser, doesn't exist for for cli preference."
ID 379236 TMM no longer restarts with a SIGSEGV when handling traffic on a virtual server with a compression-enabled HTTP profile and an iRule with the COMPRESS::nodelay command.
ID 379237 This release fixes an issue in which enabling VLAN failsafe could cause system restarts.
ID 379412 The sod process is now more resilient to malformed traffic on the High Availability channel connection.
ID 379537 IKE now consistently succeeds in renegotiation when recovering from a link failure.
ID 379600 A defect resulting from an SSH misconfiguration on certain platforms has been resolved.
ID 379633 Fixed an issue where TMM will crash if there is an error in a SERVER_CLOSED iRule on a FastL4 virtual.
ID 379920 Enabling list-all-properties for cli preferences no longer unexpectedly changes interface settings when saving and loading the system configuration.
ID 379995 A remote user name with a "\" can now login correctly. MCP validation of remote user names has been adjusted to allow backslashes.
ID 380267 This release fixes the imish cmd handling for 'log file.'
ID 380802 When using ha scoring a restarted system could momentarily have a greater score than its peer and cause a temporary failover to itself. This occurred if the user used the percent up pool members feature. When a system starts pool members are marked "checking" which is considered up. A system with down pool members would have a higher score until the pool members were determined to be really down. This problem has been fixed.
ID 381119 When redistributing routes into BGP, all redistribute statements are correctly loaded.
ID 381224 HTTP header parsing has been made more resilient, avoiding potential restarts when iterating over all HTTP headers in iRules.
ID 381230 A defect which could cause virtual servers with SIP profiles and Source Port set to Preserve Strict to drop packets has been corrected.
ID 381347 A defect which could cause Local Traffic Manager pool or node monitors to fail intermittently due to a faulty internal clock source has been corrected.
ID 381703 Debug log messages are no longer redirected to /var/log/snmpd.log, unless snmpd is started in debug mode.
ID 382078 Fix for list being modified while being traversed.
ID 382165 IPIP encapsulated monitors can now correctly use gateway pools as routes.
ID 382292 The TMM no longer crashes when black-hole route makes gateway or gateway pool member unreachable.
ID 382353 WA safely supports datastor restarts in all cases.
ID 382830 The default alert-timeout and handshake-timeout value has been decreased from 60 seconds to 10 seconds. This is a security improvement for protecting against potential denial-of-service (DoS) attacks. The configuration can be changed per custom ssl profile to longer value if needed.
ID 382855 Upgrading standalone systems with a failover unit ID of 2 in a single configuration file no longer cause a failure to load the system configuration after upgrade.
ID 383333 EtherIP-encapsulated fragments now correctly go through the EtherIP tunnel, and are correctly decapsulated and reassembled.
ID 384174 TMM no longer leaks SSL-related memory due to the existence of, among other things, Application Visibility and Reporting profiles enabled for large configurations.
ID 384392 A condition that could cause snmpd to leak node names has been fixed.
ID 384720 A defect which could cause TMM to restart with a SIGSEGV while processing IPIP encapsulated transparent monitors has been corrected.
ID 384818 Using tmsh to edit a GTM or LTM pool, or a GTM server, now correctly issues a modify command instead of a create command.
ID 385576 Fixed in 11.1.0-hf3.
ID 385694 A defect which could cause the B4300 blade to negotiate to an incorrect backplane speed in the VIPRION 4400 chassis has been corrected.
ID 385975 The WebAccelerator module is no longer susceptible to issues described in CVE-2012-0247 and CVE-2012-0248.
ID 387107 The Geolocation IP database has been updated.

Fixes in 11.1.0

ID Number Description
ID 222666 The auto-failback delay is now set to 60 seconds by default, to allow for the state mirroring information to be re-mirrored for traffic groups.
ID 224446 DNSSEC now supports SHA-2 per RFC 5702
ID 226490 This release corrects an issue that could cause TMM to crash when an iRule parks the Tcl interpreter, then the STREAM profile incorrectly continues to pass through events.
ID 291261 When multiple self IPs are configured on a VLAN or VLANGROUP that is not part of the default route domain, traffic from the host, including monitors, now consistently uses the first configured self IP as the source address.
ID 315596 The AUTH_RESULT, AUTH_SUCCESS, AUTH_FAILURE, AUTH_WANTCREDENTIAL, and AUTH_ERROR iRule events can now support iRule commands that temporarily suspend execution to get their result (for example, the commands "after", "table", "RESOLV::lookup").
ID 342860 The iRule command TMM::cmp_unit can now be used in the RULE_INIT event.
ID 344132 Application Presentation Language (APL) "editchoice" elements are now rendered as ComboBox controls.
ID 349658 The system presents an alert with a warning message when AVR is selected to be un-provisioned and has a virtual server with an Analytics profile assigned to it.
ID 351614 This release fixes a delay that occurred when creating applications based on the built-in Exchange 2010 template. The creation process is now significantly faster.
ID 353788 An alert pops up with a warning message now appears when ASM is selected to be un-provisioned but has an HTTP Class, with Application Security enabled, assigned to the virtual server.
ID 354386 You no longer must use the full path to specify the default-from property when creating NTLM profile from tmsh.
ID 354605 Leveraging dynamic load method in net-snmp to load and execute F5 MIB module in snmpd results in less CPU utilization
ID 355676 SSL Close Notify alerts are now consistently sent by clientssl and serverssl virtual servers before a FIN is sent to the client or server when the unclean shutdown setting is "disable".
ID 355996 IP Tunneling now works when using Direct Server Return.
ID 357507 Clientside ssl connections are no longer reset when a session resumes. Previously, after completing the handshake, the client sent application data and received an alert from the server before the client was ready.
ID 358654 You can now download CSV files containing valid data from the Dashboard.
ID 359597 Fixed an issue with TMM internal clock calibration that could cause a few dropped persistent connections on disabled blades.
ID 360213 Exposed additional description fields for the following objects in the web administrative interface: vlans, vlan groups, monitors, route domains, wide ip, datacenter, distributed applications, listeners.
ID 360581 The actual vCMP timeout value used for a given VM start/install/migrate attempt is shown correctly in the output of the show command, even if a timeout value is changed during an attempt.
ID 361268 In this release, the system correctly constrains rate-shaping objects to be created only in /Common.
ID 361744 IPv6-mapped-IPv4 addresses in hybrid format are now supported in any context where an IPv6 address is supported, including the FTP EPRT command.
ID 363232 "TMM no longer fails with the following log messages on 6900 platforms due to internal interface errors:
  • Assertion ""buffer is valid"" failed.
  • *** TMM 0 - PDE 0 - super jumbo frame ***
  • *** TMM 1 - PDE 1 - shorter than crc ***
ID 363444 Configuration files under /etc/alertd/ can now be copied to and from the BIG-IP system, using scp, when appliance mode is configured, allowing administrators to customize SNMP traps and email alerts for specific log messages.
ID 363547 In this release, the failsafe action correctly occurs immediately when a VLAN group member triggers a failsafe condition, regardless of the state of other VLANs in the group.
ID 364227 The assertion 'assertion "completed request is in ring" failed' no longer occurs.
ID 364276 Fixed an issue where trying to automatically license a Virtual BIG-IP would fail when using temporary network settings.
ID 364324 On the System : Users: Remote Role Groups page, you can now delete the remote-role group with the largest line order number.
ID 364437 Link Controller GUI: removed the erroneous table columns from wideip member stats and wideip details stats tables.
ID 364626 Multiple session table lookup commands no longer cause erroneous results to be returned for Network Access virtual servers.
ID 364685 Previously the sync status message of a sync group always showed Standalone if there were only subordinate non-authority devices in the trust group. Now the status properly reflects the sync status with the other devices.
ID 364918 Syncing configuration changes from a Link Controller to a Global Traffic Manager in the same sync group no longer causes the monitors to fail to load on the GTM.
ID 364923 You no longer have to use the full path when modifying an iApp Application Service via iControl
ID 364941 This release provides an additional button allows the chassis to reboot the current active blade without rebooting the secondary.
ID 364961 The IP tunnel interface no longer toggles up and down when the tunnel attributes are changed via TMSH.
ID 365173 This release provides support for monitor traffic to traverse any tunnel configured on a pool or pool member. When encapsulation is configured, monitor traffic sent to a pool member is encapsulated (according to the profile); monitor traffic returned to the BIG-IP (from the server pool member) is not encapsulated (by the server pool member).
ID 365256 "Traffic groups are now load balanced. When a failover occurs, the traffic group becomes active on the device with the least load. If two devices have the same load, the traffic group becomes active on the device with the greatest traffic group score. A load of one unit means the device is active for one traffic group, two for two traffic groups, and so on."
ID 365261 This fixes a known defect in the way configuration is loaded for a single partition. Loading a single partition configuration no longer shows this error.
ID 365370 The Alarm LED no longer turns yellow on boot-up on the 6900, 6900S, 11000, and VIPRION 2400 platforms.
ID 365507 The required character sets jar file has been included to allow the MSSQL monitor to support multiple language encodings.
ID 365582 A GTM iRule that refers to a pool without specifying the full path (e.g., [pool pool1]) will now work correctly when that pool is found in multiple folders. Correct behavior is to always choose the pool in the wideip's folder, and to dynamically switch if a pool (with the same name as in the iRule) is added/deleted in that folder.
ID 365771 The system now correctly constrains the cache size so that it cannot be zero.
ID 365917 When modifying an iApps application service using iControl, the implementation script is now correctly executed to update the objects owned by the application.
ID 365921 The system now correctly restricts a file name to not allow special characters. This enables a file saved to the primary blade to be synced to secondary blades.
ID 366185 Diameter Application Template online help now displays correctly.
ID 366325 Online help no longer references bigpipe commands.
ID 366419 Evaluate transfer-encoding headers in a case-insensitive manner to ensure proper interaction of compression and chunked encoding.
ID 366505 Byte Range requests sent to the Admin GUI or an APM login page are now limited to at most 5 byte range sets, to prevent the vulnerability described in CVE-2011-3192.
ID 366601 The marketing name for part number 200-0194-04 is no longer incorrectly identified as a 6600 platform.
ID 366831 Removed the DigiNotar CA certificate.
ID 366881 "Previously, if a chassis had a blade present at some point and then that blade was permanently removed (or specifically if the TMMs on that blade were permanently stopped), the remaining blades in the chassis would incorrectly think the missing blade had returned after a 25 day period. Traffic is no longer sent to the missing blade preventing lost traffic."
ID 367476 The Unit ID reference has been removed from the online help.
ID 367836 This release corrects an issue involving excessive memory usage and crash/core when loading GTM configs with large numbers of virtual servers with topology records.

Fixes in 11.0.0

ID Number Description
ID 221972 Previously, connection flow timers were calculated using a reference from the system time (seconds since epoch). In the event that system time changed, connection flows could be aged out prematurely or removed entirely. Connection flow timers are now calculated using a monotonic timer derived from the system uptime (seconds since boot), not the system time.
ID 222455 TMM previously queued only one packet per flow for a given destination when there was a pending neighbor ARP response. The default depth is four packets and can be configured by adding the bigdb variable tmm.nbr.pbqlen.
ID 222533 Using HTTP::Respond and LB::Reselect together within the LB_FAILED event no longer causes tmm to crash.
ID 222626 BIG-IP 11.0 supports 4-byte ASN in BGP as defined in RFC4893.
ID 222635 The TCP transmit window scale is now set properly in the event that the server sends data before the client does.
ID 222888 Previously, persistence record timers were calculated using a reference from the system time (seconds since epoch). In the event that system time changed, persistence records could be aged out prematurely or removed entirely. Persistence record timers are now calculated using a monotonic timer derived from the system uptime (seconds since boot), not the system time.
ID 223587 A condition where mcpd could potentially leak memory has been corrected.
ID 223625 A condition where tmm could crash when using SSL:renegotiate within the HTTP_REQUEST context has been corrected.
ID 223667 Inband health monitors no longer mark a node down when a client request is split into two or more segments with a delay of 20ms or greater between segments.
ID 223766 HTTP GET requests including a message body, combined with RamCache usage and an HTTP::respond command in an LB_FAILED event no longer cause connections to stall and avoid the configured idle timeout.
ID 223787 This release corrects the race condition that caused the system to write out a core file and posts the panic notice "Pool member is passive downed" failed when, in a specific configuration, a monitor other than the passive monitor marks a pool member down.
ID 223836 ID 223836, CR132172 In server SSL profiles, Renegotiation is now enabled by default.
ID 223883 TMM no longer crashes when you change the assignment of an iRule to a virtual server when the iRule contains any commands that may suspend execution (such as after, table, and persist).
ID 224060 On 1600, 3600, 3900, 6900, and 8900, and 8950 platforms, the values in sysIfxStat portion of the F5-BIGIP-SYSTEM-MIB file are now updated properly.
ID 224085 On VIPRION systems with PUMA II blades, erroneous blade power down/up messages sent from clusterd when no power up or down event has happened have been eliminated.
ID 224111 snmpd no longer fails and cores when executing snmpwalk with certain command-line parameters.
ID 224391 The system now correctly parses an iRule if commands that contain an escape character (previously described as a suspended command following an escaped newline character).
ID 224966 When the nameservers are changed using tmsh modify dns name-servers, the system restarts the httpd service to reload the DNS configuration.
ID 224993 On a partitioned system, a virtual server could not be deleted that had an http class with WebAccelerator set to Accelerate at creation time. This issue has been resolved.
ID 225190 The root account home directory (/root) permissions have been modified so as to be only user readable, writable, and executable.
ID 225257 The syscheck and oprofile users have the home directory properly set to ‘/’.
ID 225328 As a tool for diagnosing the cause of TCP RST packets, the system may be globally configured to include a very brief explanation as the payload in each RST packet and/or to log this reason whenever sending a RST packet. This behavior is controlled by setting the corresponding DB variables TM.RstCause.Pkt and/or TM.RstCause.Log to "enable". The default for both is "disable", and this should be considered the correct setting in a production environment, since use of this functionality may impair stability.
ID 225448 4096-bit SSL keys in Server SSL profiles (ID 225448, CR139406) The system now correctly supports 4096-bit SSL keys to configure Server SSL profiles.
ID 225514 A bug has been fixed where in certain circumstances, TMM could leak memory in CMP mode while handling internal SSL certificate chain structures.
ID 225824 A memory leak observed in tamd when using a RADIUS authentication profile has been corrected.
ID 225863 Previously, if you set the timeout value for insert, passive or rewrite cookie persistence profiles in bigip.conf (as this value is not exposed in the web GUI), if you updated other settings for those profiles via the web GUI, the timeout setting would be lost and would revert to the system default of 180 seconds. This has been resolved and the system now preserves the setting manually added in bigip.conf.
ID 226027 Statistics of FTP virtual servers for ACTIVE connections now properly include PVA and ephemeral traffic on the correct side/direction of the connection.
ID 226119 The use of "foreach" in an iRule now properly iterates over a paired index.
ID 226399 Wildcard virtual server/virtual server listening on UDP port 62720 (ID 226399, ID 248017, CR141404) VIPRION systems correctly handle traffic after configuring a wildcard virtual server or a virtual server listening on UDP port 62720.
ID 226458 TMM no longer cores and restarts when an iRule command executes causing the rule engine to suspend, and a subsequent, malformed UDP packet arrives on the same connection. The following log message is an indication that this bug has been encountered: Assertion "validate up->pkt" failed.
ID 226475 tmsh now displays stp bridge information and stp state.
ID 226828 The SNMP object ltmPoolMemberStatAddr now contains the correct IP address information for pool members with route domain.
ID 226972 In previous releases, the system reused client IDs from previous sessions to reestablish SSL connections. Now, in situations where security changes in the BIG-IP configuration, for example, an iRule changes the security parameter to request or require client certificates, the system establishes a new SSL connection with the client and does not reuse the previously established session ID.
ID 227123 When an iRule uses HTTP::path to modify the path in a URI that also contains a query string, the query string is properly preserved.
ID 227144 When load balancing UDP datagrams, the flow table is properly checked in order to prevent a server-initiated flow from inadvertently using the same port as an in-progress client-initiated flow.
ID 227148 Adds the ability to import and export partial text configuration in TMSH.
ID 227179 The htpasswd utility has been removed from the system.
ID 227180 Ownership and permissions for the web server configuration files have been fixed.
ID 227220 Prior to 11.0, the caching system would treat a request as cacheable by default, and would then check the specified URI regexes (exclude, pinned, include) to modify the cacheability. This left no easy way to specify that only a given list of URIs was to be cached. Starting in 11.0, the previous "include" regex has been renamed to "include-override"; existing configurations are automatically changed by the upgrade process. Further, the default is now to consider a URI non-cacheable, and a new "include" regex has been added, which defaults to match all URIs. In this way, any configuration from a previous release should behave exactly as it has in previous releases, but new configurations can easily specify that only a given list of URIs should be cached. Just as before, the exclude and pinned regexes take precedence over (what is now in v11 known as) the include-override regex. Also, the exclude, pinned, and include-override regex will all take precedence over the include regex.
ID 227221 TMM no longer cores under certain conditions when the internal interfaces are reset.
ID 246935 The SOAP monitor now correctly takes into account the protocol setting in the monitor configuration. Regardless of the destination port, a setting of "https" will result in the SOAP monitor connecting to the server over SSL/TLS, while a setting of "http" will result in an unencrypted connection.
ID 247643 The boot process no longer hangs if the syslog-ng process is not running while Apache is initializing.
ID 247801 When the static ARP entry is added while a dynamic entry exists for the same address, the static ARP entry takes precedence, and you no longer see two ARP entries for the same address.
ID 247972 TMM no longer immediately reuses source ports for server-side connections when the same TMM handles multiple consecutive connections from a single client with CMP enabled.
ID 291695 The system now load balance messages as expected for the ratio load balancing method, for virtual servers configured with RADIUS, Diameter, or SIP profiles.
ID 293854 NTLM connection pool variables are now correctly initialized and ntlmconnpool no longer crashes during SharePoint transactions.
ID 325315 SNMP support has been added to Advance Routing.
ID 330791 The PVA-TMM I/O channel is no longer reset after a pvad synchronization on systems with a PVA2. This condition previously caused the following messages to be logged very close to one another:
  • pvad[2064]: 01130003:6: PVA2 incoherency detected; synchronization required.
  • pvad[2064]: 01130003:6: Resetting PVA i/o channel after 0 failed retries.
  • pvad[2064]: 01130003:6: PVA2 synchronization complete
ID 336355 The "tomcat" user no longer has access to a shell.
ID 336817 TMM now correctly converts TCP timestamps for SYN-ACK replies from remote servers before sending them on to the Linux host when more than one initial SYN was transmitted. This avoids, for instance, monitoring connections periodically being reset when remote servers are slow to acknowledge the initial SYN.
ID 337175 Fixed issue where fragmented IP packets from the Linux host (such as large SNMP responses) are delivered with incorrect port or dropped.
ID 337562 URI::decode now properly handles strings that do not convert well to UTF-8.
ID 338062 On 3400, 6400, 6800, 8400, and 8800 platforms, that is, platforms with Packet Velocity application-specific integrated circuit (PVA), the system now correctly sends ICMP Unreachable - Fragmentation Needed packets to FastL4 virtual servers set for PVA assist.
ID 338150 For the HTTPS monitor, mid-stream SSL renegotiation has been enabled in order to handle monitoring servers that do not request the client certificate until after application data starts flowing, specifically, Microsoft Internet Information Services (IIS) versions 6 and IIS 7.
ID 339291 The default maximum size of the IPv6 routing table has been increased to 8192 entries.
ID 339379 TMM and HTTP::header sanitize command (ID 339379) Traffic Management Microkernel (TMM) now responds correctly when the virtual server references an iRule with the HTTP::header sanitize command.
ID 339461 When using copper SFPs to connect 10M or 100M hosts, the interface is correctly configured and comes up properly.
ID 339744 This release corrects the condition that caused the Traffic Management Microkernel (TMM) core events, which produced a ** SIGSEGV ** that included the following notices: notice fault addr: 0x68 and notice fault code: 0x1.
ID 339847 msktutil and domaintool utilities and unprivileged users (ID 339847) The msktutil and domaintool utilities no longer crash when run by an unprivileged user, reporting the message glibc detected-msktutil: munmap_chunk(): invalid pointer: 0xff920190. The output now correctly reports that the logged on user must be an administrator.
ID 339955 The Configuration utility now correctly updates the /config/bigip_sys.conf file so that ConfigSync or configuration reload does not disable initial network failover configuration.
ID 340081 A crash no longer occurs when an iRule suspends then returns from suspension after the connection closes.
ID 340274 BIG-IP LTM no longer prefers a client-offered SSL cypher when using COMPAT mode.
ID 340336 The peer certificate mode auto is now the functional equivalent of ignore. The mode auto remains, but functions the same as ignore.
ID 340407 Basic TCP monitors that are associated with a pool or pool member that is not listening on the monitored port, no longer erroneously mark a node up when it is actually down.
ID 340651 This release corrects the condition on VIPRION platforms, in which setting the db variable vlan mac assignment to global resulted in some or all of the VLANs receiving a zero MAC assignment, which could cause no traffic to pass on a VLAN. You can now set db variable vlan mac assignment to global and there are no longer VLANs with MAC address of zero.
ID 340659 RESOLV::lookup -ptr now properly returns PTR records.
ID 340696 The system now correctly handles a large number of self IP addresses or VLANs when starting up the ntpd process, and no longer halts with a segmentation violation or related crash.
ID 340718 sod no longer crashes when failover debugging is enabled and the log file grows beyond 2 GB in size.
ID 341217 Trailing semicolon and whitespace and removing HTTP cookie (ID 341217) The system now correctly removes the trailing semicolon ( ; ) and whitespace when removing an HTTP cookie from the HTTP header data.
ID 341329 Routing Modules have been officially added in VADC.
ID 341404 VLAN group Proxy Exclusion List now correctly loads on secondary blades in a VIPRION cluster.
ID 341414 CompactFlash and swap partition (ID 341414) The system no longer incorrectly uses the CompactFlash® card as a swap partition. Now, the system correctly uses a swap partition on the system hard drive.
ID 341663 Persistence table additions and lookups on CMP systems no longer assume there will only be one entry per connection, allowing for persistence to maintained when the server-side connection is switched to a different pool.
ID 342010 iRule command table keys -subtable (ID 342010) Use of the table keys -subtable iRule command no longer causes a memory leak.
ID 342044 Now monitors are able to provide correct server status when the server sends more than one response per monitor probe.
ID 342976 On VIPRION, clusterd no longer miscalculates the clock skew of a secondary blade, which caused a reboot to be issued when ntpd moves the clock forward.
ID 343037 snmpd now functions properly with IPv6 and with route domains.
ID 343150 IPv4 and IPv6 addressing may be used for Config Sync operations.
ID 343610 An issue causing snmpget and snmpwalk to perform slowly on the 6400/6800/8400/8800 platforms has been fixed.
ID 344159 TMM no longer leaks memory when using the "after" command in an iRule under certain circumstances.
ID 345047 The handling of large numbers of virtual servers has been improved, and the CPU usage for the pvad process should no longer be adversely affected in such situations.
ID 345057 When a VLAN group has a self IP, but none of the member VLANs have self IPs, enabling VLAN failsafe on any of the VLANs in the group no longer results in the failsafe triggering without cause.
ID 345266 TMM no longer reverts the datagram_lb setting when configured in a UDP profile along with a message-based load balancing configuration.
ID 345300 If an iRule returns from a suspended state to a flow that is dying, execution is discontinued.
ID 345314 A condition where the LB_FAILED event could fire twice leading to a tmm crash has been resolved.
ID 345634 RESOLV::lookup now properly resolves IPv6 PTR records.
ID 345712 TMM no longer crashes when an iRule calls the TCP::notify command multiple times during the lifetime of a connection.
ID 345873 A condition causing connection to get stuck in "Authenticating...." when using the iOS (iPhone/iPad) Edge Client has been corrected.
ID 345944 BIND update (ID 345944) BIND has been updated to mitigate two vulnerabilities, tracked by the Common Vulnerabilities and Exposures (CVE) project as CVE-2010-3613 and CVE-2010-3615.
ID 346107 When using VLAN groups, egress traffic is correctly handled (no longer dropped) when the egress VLAN is the same as the ingress VLAN, when using a non-VLAN-group listener.
ID 346202 On the VIPRION system, the system_check utility now correctly checks the temperature on all blade types.
ID 346580 With certain configurations that include reselect on service down with pool members that are at least one hop away, tmm no longer crashes if a configuration file is loaded while traffic is flowing to the virtual.
ID 346901 The 8900 NEBS platform is now checked properly for timezone updates.
ID 347053 Stability enhancements have been made to mcpd when using node monitors.
ID 347628 You can specify the netmask in an iRule in dotted quad format, for example, / In versions 10.0.0 through 10.2.1 of the software, this functionality was deprecated. In 10.2.2, the functionality has been restored.
ID 347838 This release corrects an issue that caused ICMPv6 traceroute to BIG-IP to always fail.
ID 347858 A condition under which mcpd could potentially leak memory has been corrected.
ID 347898 Enabling "Verified Accept" on a TCP profile assigned to an IPv6 virtual server no longer produces a switchboard failsafe and a tmm core.
ID 347921 The tm.rejectunmatched db key setting is now honored properly on virtual servers using FastL4 profiles.
ID 347973 Intermittent failures of mcpd to subscribe to stats segments should no longer cause an exit and core file to be generated.
ID 348141 VIPRION 2400 platforms no longer display "invalid trunk" entries in the forwarding database when self-IPs are added or deleted from the system.
ID 348225 A condition where tmm could loop trying to send the same SACK hole packet has been resolved.
ID 348368 The RFC1997 restrictions on BGP community strings imposed by ZebOS 7.5 and newer have been removed to restore the ZebOS 5.4 ability for users to set community strings to any value.
ID 348529 The STREAM filter no longer misses some matches when the target string is smaller than the source string.
ID 348660 An RST sent by a client connected to a virtual server using a TCP profile with "Verified Accept" no longer leaves that virtual server in a hung state.
ID 349216 A condition where tmm cores when a ramcache proxy lookup is done on an aborted request has been fixed.
ID 349312 The firmware and bootloader versions for the 8900 platform are now correctly cached during system startup and no longer generate an error message.
ID 349373 A defect has been addressed which could cause TMM to core and restart under some conditions when an iRule command causes the TCL interpreter to suspend and resume. The failure condition could be accompanied by a variety of log messages in /var/log/tmm, including the following:
  • Assertion "valid tclconn for cf" failed.
ID 349481 TMM no longer crashes under circumstances when an MTU update is done on a connection flow that already has an existing mss value, even if mss = 0.
ID 349872 A condition that could cause clusterd to leak memory has been fixed.
ID 349964 Logging from mcpd has been enhanced.
ID 350080 Stability enhancements to mcpd have been made.
ID 350218 Link Aggregation Control Protocol (LACP) now properly enforces the partner SysId match check to prevent aggregation of ports connected to different remote switches.
ID 350434 In previous releases, certain iRule commands (for example, table and persist) might not complete when executed in the CLIENT_CLOSED event. In this release, commands of this type complete correctly.
ID 350652 A defect has been addressed which could cause TMM to core and restart in certain connection teardown conditions when using ramcache.
ID 350982 A condition that could cause clusterd on VIPRION systems to leak memory has been corrected.
ID 351579 Moving a virtual server from one server definition to another in the wideip.conf configuration file will no longer cause stale monitor configurations to remain in operation.
ID 352552 The HA group percent score is now updated correctly after reboot.
ID 353505 In the absence of a default route LTM monitor may start probing a node on a non-local subnet via the management interface. After adding a default route it used to keep sending the probes with the management IP as the source address. This issue has been fixed.
ID 353871 Fixed an issue where certain certificates would be displayed with an invalid expiration date (an extra 1900 years was mistakenly added).
ID 353934 File and directory permissions for /shared/ssh/root now have the proper umask settings.
ID 354398 TMM will no longer forward packets originating from the host when a routing loop is configured elsewhere in the network that sends the packets back to the LTM on the vlan they were originally sent out on.
ID 354597 The tmm process no longer cores and restarts when an empty input string is passed to any of the URI:: iRule commands.
ID 354998 Persistence profiles using the map proxies feature now correctly map IPv4 addresses with the data group configured by the Persist.WellKnownProxyClass bigdb variable.
ID 355152 This release corrects a chmand process leak that occurred on the 1600, 3600, 3900, 6900, 8900, 8950, 11000, and 11050 platforms (more specifically, platforms with the Always-On Management (AOM) subsystem).
ID 356287 Connections to FastL4 virtual servers are no longer incorrectly reset when they receive invalid ICMP messages.
ID 356655 The BIG-IP Dashboard now correctly displays platform limits for the VIPRION 2400.
ID 356718 In Appliance mode, running an edit command in tmsh invokes the nano editor instead of the vi editor.
ID 356849 The /var/log/tmm now shows the correct OCTEON revision number.
ID 357324 PVAD no longer writes duplicate MAC addresses to the limited (size of 16) PVA2 L2 table, avoiding a situation where the table could fill up unnecessarily. The following log message is an indication that the L2 table has filled up: 01130001:4: PVA memory constraint : can have no more than 16 vlans in unique MAC mode
ID 357841 The following VIPRION blade powered up and down messages should no longer be erroneously logged: Apr 15 23:37:07 slot1/host1 err clusterd[4638]: 013a0009:3: Blade 1: blade 3 powered DOWN. Apr 15 23:37:07 slot1/host1 err clusterd[4638]: 013a0009:3: Blade 1: blade 4 powered DOWN. Apr 15 23:37:08 slot1/host1 notice clusterd[4638]: 013a0010:5: Blade 1: blade 3 powered up. Apr 15 23:37:08 slot1/host1 notice clusterd[4638]: 013a0010:5: Blade 1: blade 4 powered up.
ID 358180 There are new statistics measures to support secure SSL connection renegotiation. secure_handshakes: The number of handshakes, including mid-stream re-negotiations, performed with peers supporting SSL secure renegotiation. insecure_handshake_accepts: The number of handshakes, including mid-stream re-negotiations, performed with peers not supporting SSL secure renegotiation. insecure_handshake_rejects: The number of rejected initial handshakes with peers not supporting SSL secure renegotiation. insecure_renegotiation_rejects: The number of rejected renegotiation attempts by peers not supporting SSL secure renegotiation.
ID 358623 The SIP protocol now correctly handles expired flows when an iRule is suspended while executing a SIP iRule event.
ID 358625 A defect causing TMM SIGFPE cores due to an improper handling of certain iRule commands (for example, "persist") has been fixed. A panic log message such as the following is a possible indication that this bug has been encountered:
  • panic: Tcl Object bdba8dc is currently on free list
ID 358684 A defect has been corrected, which could cause interfaces on a VIPRION 2400 blade to occasionally show as missing (MS).
ID 358774 The following benign log message no longer appears on non-cluster systems at startup and shutdown: 012a0004:4: halGetChassisAllSlots: error 1 May 9 06:16:33 localhost err fpdd[4375]: 00010038:3: Unknown HAL API error, returned (1) for request halGetChassisAllSlots
ID 358788 TMM no longer crashes when the TMM is restarted on the standby machine in a high-availability configuration that includes connection mirroring. Making configuration changes to an HA channel configuration that includes connection mirroring no longer cause TMM to core.
ID 358865 TMM no longer exits with a SIGFPE in certain situations when a Standard virtual server is targeting a FastL4 virtual server. The following panic string is an indication that this issue was encountered: Assertion "flow in use" failed.
ID 359466 Connections are now correctly re-mirrored after a failover event, regardless of when the alternative HA mirror link state has been marked as "down".
ID 359620 Stale mirroring entries on the switch chip no longer cause LACP packets to be dropped.
ID 359730 "SSL::cert" iRule commands can now correctly be called during a SERVERSSL_HANDSHAKE event on virtual servers that have serverssl profiles. Rather than returning empty results, accurate server certificate information is now returned.
ID 360515 BIND has been updated to mitigate the vulnerabilities in CVE-2011-1910.
ID 361121 Rather than having no effect, the TCP::respond iRule command now sends a TCP packet with no payload when called with an empty string.
ID 361300 When upgrading from a previous release, all blades in a chassis now correctly initialize the base MAC address.
ID 361562 The pvad process handling of large numbers of virtual servers and other objects has been improved.
ID 361676 6900, 8900, 8950, and 11050 platforms using hard drives greater than 500 GB, no longer fail to create a logical volume for datastor when provisioning WOM. To determine what size disk you have, log on to the command-line interface using the root account, and run the command pvscan.
ID 361741 Authentication to a BIG-IP system via iControl should no longer fail due to corrupt PAM tallylog files. The following log messages are an indication that this problem has occurred:
  • PAM Couldn't write /var/log/pam/tallylog, -138170000 bytes : Resource temporarily unavailable
ID 361777 The VIPRION 2400 platform no longer fails to perform a thermal shutdown of blades. Previously, blades would occasionally fail to shutdown.
ID 361782 When an iRule command that causes a suspension to occur (for example, the "table" command) is executed on a FastL4 virtual server, the following error message is no longer logged, and rule execution will not be prematurely terminated:
  • Attempted to resume iRule for closed flow (listener virtual_server)
ID 361839 The stream filter now correctly forwards iRule events that it is unaware of (for example, ASM::violation_data), rather than silently dropping them and thus potentially causing connections to stall.
ID 361864 The hardware information for LOP and BUC devices is now reported correctly.
ID 361952 An issue causing the PVAD daemon to core no longer occurs on the 6800 platform.
ID 362109 SNAT and Automap now work correctly for additional protocols. The flow key's local port is not adjusted to 0 unless the protocol is TCP, UDP, or SCTP.
ID 362175 TMM's connection flow table is no longer corrupted by the ungraceful shutdown of any TMM.
ID 362436 The following log message is no longer erroneously displayed during normal system startup: Jun 22 05:53:49 tmm warning tmm[30894]: 01010031:4: Device warning: hsb 0.1 - 1 hw watchdog timeouts
ID 362851 The Dashboard utility now displays platform limits for all VIPRION systems as the maximum value for a fully-loaded chassis.
ID 363027 Fixed a delete permissions issue with locally authenticated users.
ID 363030 If the DB variable tmrouted.queryperiod is set to a value that requires querying virtual servers more than once per second, the system now queries correctly and no longer drives up CPU usage.
ID 363082 The correct product category ("VIPRION") is now provided when calling the iControl function System::get_system_information() against PB200 and PB200-NEBS VIPRION blades.
ID 363310 BIND has been updated to mitigate the vulnerabilities in CVE-2011-2464.
ID 363988 The following log messages are no longer erroneously printed to /var/log/tmm on VIPRION 2400 systems: Skip potential RQM forward pkts read error and Skip potential RQM drop pkts read error.
ID 364024 1 GB SFPs now correctly establish an "up" state on B2100 (VIPRION 2400 blade).
ID 364112 VIPRION 2400 blades now correctly take the chassis MAC address as their base when they are inserted into a new chassis.
ID 364699 ClientHello SSL messages greater than 256 bytes in length no longer cause connections to clientssl virtual servers to stall, or re-negotiations to fail.
ID 365295 Heavy session table usage no longer results in connection stalls on 11000/11050.

Behavior changes in 11.2.0

ID Number Description
ID 224369 New DNS monitor for LTM has been implemented in this release. Please, see product documentation and online help for further information.
ID 240593 While all other naming conventions remain the same, BIG-IP now allows user names to start with numeric characters (0-9), including purely-numeric user names.
ID 247789 In this release, SNMP traps, RADIUS log messages, and Syslog log messages are sourced from the VIPRION cluster management IP address. Therefore, the route you define to the BIG-IP system on the SNMP manager must be the route to the VIPRION system's cluster management IP address. In addition, you must ensure that firewalls and other internal software can accommodate SNMP traps, RADIUS log messages, and Syslog log messages sourced from the VIPRION cluster management IP address. If you configured these traps and log messages to be sourced from the blade management IP addresses, the operations may not function as expected after upgrading.
ID 345907 In F5-BIGIP-SYSTEM-MIB, arx1500 (., arx2500 (., bigip11000F (., bigip11050F (., bigip6900F (., bigip6900N (., bigip6900S (., bigip8900F (., bigip8950S (., and bigipPb200N (. OIDs have been added under sysDeviceModelOIDs.
ID 361222 TCP MD5 authentication support has been added for IPv6 neighbors BGP.
ID 365123 New options are available for configuration of the command line prompt to display the fully qualified domain name, mcp phase and last configuration load status of a BIG-IP. Instructions for modifying the environmental variable PS1 can be found in the file /etc/bashrc, which can be modified for all users. For individual users, the PS1 variable may be configured via a .bashrc file in the users home directory.
ID 365635 The ssldump utility might not decode data for protocol TLS v1.1 or v1.2. There is no workaround for this issue in this release. For information about the ssldump utility, see SOL10209: Overview of packet tracing with the ssldump utility, available in the AskF5 Knowledge Base.
ID 367620 Persist profiles based on with source_addr and dest_addr, in which CARP has also been selected as the hash algorithm, can be toggled to include the corresponding port number in the hash calculation. This behavior is controlled on a global basis by two new DB variables: Persist.SrcAddrCarpIpPort and Persist.DestAddrCarpIpPort. Both take values 'enable' and 'disable', with 'disable' as the default.
ID 368299 In F5-BIGIP-LOCAL-MIB, a new ltmDnsProfileStat (. object has been added to provide statistics information for DNS profiles. Additionally, ltmDnsProfileDns64Mode (., ltmDnsProfileDns64PrefixType (., ltmDnsProfileDns64Prefix (., ltmDnsProfileDns64AdditionalRewrite (., ltmDnsProfileDnsLastAction (., ltmDnsProfileUseLocalBind (., ltmDnsProfileDnsExpressEnabled (., ltmDnsProfileDnssecEnabled (., ltmDnsProfileCacheEnabled (., ltmDnsProfileDnsCache (., and ltmDnsProfileProcessRd (. OIDs have been added under ltmDnsProfileTable.
ID 369628 There is no longer a MAX LIMIT for a rate class set at 2 G. The rate limit is now 20 G.
ID 369943 DHCPrelay proxy added support for dhcpv6.
ID 370519 "Tunnel interfaces are now propagated to dynamic routing protocols. This allows networks connected to or reachable via tunnels to be advertised via dynamic routing. NOTE: IGP dynamic routing protocols such as OSPF, IS-IS and RIP cannot establish adjacency over tunnel interfaces."
ID 371131 User authentication on BIG-IP through LDAP server may now use LDAP membership as a part of remote role determination when assigning a role to a user of the BIG-IP system.
ID 371946 TLS version 1.1 (RFC 4346) is now supported.
ID 374447 DHCPrelay proxy added support for multi-hop DHCP requests. Now BIGIP DHCPrelay virtual server can handle both requests directly from a client or requests relayed from another DHCP relay agent.
ID 375096 IPv6 router-advertisement functionality has now moved to the TMM and can be configured via iControl. Refer to the iControl documentation for more information.
ID 375283 BIG-IP added support for user customizable MIB. Custom MIB entries can be configured in an optional config file /config/snmp/custom_mib.tcl.
ID 375639 In F5-BIGIP-SYSTEM-MIB, the sysAttrConfigsyncState (. object has been deprecated and replaced by the sysCmSyncStatus (. and sysCmSyncStatusDetails (. objects.
ID 375918 In F5-BIGIP-SYSTEM-MIB, a new sysCmTrafficGroupStatus (. object has been added to provide information about status of the traffic group(s) on the BIG-IP system.
ID 376350 In F5-BIGIP-SYSTEM-MIB, sysAttrFailoverActiveMode (., sysAttrFailoverForceActive (., sysAttrFailoverForceStandby (., sysAttrFailoverUnitMask (., and sysAttrFailoverUnitId (. objects have been deprecated, and new sysCmFailoverStatus (. and sysCmFailoverStatusDetails (. objects have been added to provide information about failover status on the BIG-IP system.
ID 376751 During upgrade, you might see the following messages: "notice chmand[14978]: 012a0005:5: FANTRAY PIC boot loader (v1.14) is not supported", "notice chmand[14978]: 012a0005:5: FANTRAY PIC boot loader v1.20 or later is required to upgrade the firmware to v3.01." These are non-critical messages about boot-loader version support for upgrading fan-tray firmware to v3.01. An associated issue that happens rarely, occurs when multiple blades make fan-speed requests. Software versions earlier than v3.01 software does not aggregate fan-speed requests, and because the fan tray immediately acts on the requests, if different blades request different fan speeds, the fans could oscillate. This is an unlikely occurrence because the blades check the same temperatures and should send similar fan-speed requests. Even if the fan speeds oscillate, however, the system maintains chassis cooling.
ID 382225 The following platforms have reached End of New Software Development and therefore do not support v11.2: 6400, 6800, 8400, and 8800. These platforms are still supported by F5 Networks. For more information, refer to SOL9412: The BIG-IP release matrix.
ID 382308 When specifying a unicast address for network failover only, you must use self IP addresses from the default routing domain.
ID 382882 A mgmt interface configured by DHCP (Dynamic Host Configuration Protocol automatic addressing) have the comment "configured by dhcp" associated with it. This comment persists with a statically addressed configuration and can be safely removed if desired.
ID 383987 SSL renegotiation is now enabled by default. In previous versions, SSL renegotiation was disabled by default.

Behavior changes in 11.1.0

ID Number Description
ID 227306 The radvd service is now fully and completely incorporated within TMOS. The configuration that was used by radvd (specified in the /etc/radvd.conf file) is now part of the BIG-IP system configuration and can now be set using tmsh. For more information, see the 'net router-advertisement' section of the tmsh manual or the tmsh command-line help.
ID 367753, ID 371627 In this release, the software uses ssmtp to perform mail forwarding to a mail host for locally generated email messages from the BIG-IP system. The Postfix mail transfer agent has been removed. You can find information on how to configure ssmtp in SOL13182 and SOL13182: Change in Behavior: Postfix has been removed from BIG-IP software and SOL13180: Configuring the BIG-IP system to deliver locally generated email messages (11.x) in the AskF5 Knowledge Base.
ID 368186 The sysCpuNumber and sysCpuTable OIDs (under sysCpu) have been deprecated and replaced by sysCpuSensorNumber and sysCpuSensorTable OIDs (under sysCpuSensor).
ID 370927 In this release, there is a new option, lifetime, for the create key command (sys crypto key). Lifetime specifies the number of days the certificate will be valid for, and is useful in conjunction with the gen-certificate option when generating a key as well as a certificate.
ID 370964 "When upgrading a 10.x standard active/standby pair, the recommendation is to start with the device with the numerically highest management IP address. There is a change in behavior in 11.1.0 that automatically selects the system with the highest management IP address as the active member of the HA group. Depending on your configuration, an upgrade could result in lost traffic."

Behavior changes in 11.0.0

ID Number Description
ID 208624 The default value for slow ramp time was changed from 0 (disabled) to 10 seconds.
ID 222483 bigd monitoring that used SSL had previously sent "SSLv2 Client Hello" to establish secure connections. This version, turns off the use of SSLv2 Hello in favor of a TLS Hello.
ID 223709 Cross route domain after upgrade (ID 223709, CR131366) In this release, there is a Strict Isolation option for route-domain configuration. The option is enabled by default. So existing configurations that direct traffic across route domain boundaries will no longer work after upgrading. When that happens, the system logs in /var/log/ltm a message similar to the following: Oct 24 16:29:46 local/tmm1 warning tmm1[6636]: 01200011:4: Connection rejected from IP port 33845 to IP port 80: One of the route domains is strict. To have traffic cross the route domain boundary, disable the Strict Isolation option in Network > Route Domains for ingress and egress route domains.
ID 224579 Oracle JDBC monitor syntax change. The Database field is renamed to Connection string, and uses new syntax. The old database syntax is: %node_ip%:%node_port%:<db name> An example of the new database syntax is: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=%node_ip%)(PORT=%node_port)) (CONNECT_DATA=(SID=<db name>)) (SERVER=dedicated)) When upgrading, the old database string is converted to the new connection string syntax.
ID 336820 This release does not support the use of bigpipe or tmsh to add a software ISO image to the system. Supported methods include using the Import procedure by clicking the Import button on the System:Software Management:Image List page within the web management interface or using scp to copy the ISO image to the /shared/images directory prior to installation.
ID 340221 The Create button has been removed from the volume-creation portion of the Software Management screen. Instead, you specify a new name to create a volume when you initiate an installation operation.
ID 342790 COMPAT ciphers used to be displayed for server cipher strings such as ALL, HIGH, LOW, MEDIUM, etc. Now, COMPAT ciphers are displayed only if you explicitly indicate in the cipher string that the COMPAT ciphers be shown. For example, cipher strings such as ALL and LOW display only Native ciphers. LOW:COMPAT displays all LOW ciphers including Native and COMPAT. HIGH+COMPAT displays the HIGH ciphers that are COMPAT; Native ones are not displayed.
ID 348217 The system no longer counts pool members that are still ramping up (because of a slow ramp setting) against the minimum-up member requirement for subsequent priority group activation.
ID 351457 This release provides new TCP profile attributes: Initial Congestion Window Size, Initial Receive Window Size, Initial Retransmission Timeout Base Multiplier for SYN Retransmission, and Delay Window Control. Based on RFC3390, the initial window size is set to 3 * MSS. The new TCP profile settings allow configuration of a larger base multiplier (n * MSS) for the initial window size, which can help deliver applications faster and improve response time. Descriptions of the controls appear in the online help for the TCP profile.
ID 353344 Previous versions of the BIG-IP system installed two software slots as part of a clean installation. The current version of BIG-IP now installs only one software slot as part of a clean installation. For the live install feature to work correctly, customers should ensure that at least two software slots are installed on each blade in the system.
ID 354518 The VIPRION 2400 has an RJ45-type connector for the Console port. Part of the updated functionality of the Always-On Management (AOM) serial port includes auto-baud, meaning that when you connect a cable to the Console port and issue a break from the keyboard, the system enables scrolling through baud rates using the return key. If you accidentally plug an active Ethernet cable (that is, a cable carrying network traffic rather than serial terminal data) into the Console port, when you power up the blade, the auto-baud functionality might engage, even though the cable is not connected to a valid serial terminal. This occurs because, depending on the traffic on the cable, network communications can simulate the effect of issuing a break, which initiates auto-baud. If you are already in this condition, after you remove the Ethernet cable and connect a valid serial cable, you will likely see garbled content on the serial terminal until you reset the AOM serial port’s baud rate to match the terminal’s baud rate. To synchronize AOM and terminal baud rates, follow these steps:
  1. Issue a break (using the <BREAK> key on the keyboard).
  2. Press return to have AOM cycle through the supported baud rates (115200, 57600, 38400, 19200, and 9600)
  3. When the baud rates are synchronized, the following prompt appears --- Press <ESC>( for AOM Command Menu. You can then press Esc ( to access the AOM Command Menu.
ID 356804 There is a new way of handling files with external data group definitions: before assigning it to external class, a file must be imported using System :: File Management :: Data Group File List. For example, to import an iRule file and use it:
  1. Go to System :: File Management :: Data Group File List.
  2. Click Import.
  3. Specify the file you want to use, or use Browse to find it.
  4. Click Import.
  5. Go to Local Traffic :: iRules :: Data Group List.
  6. Click Create.
  7. In Name, type the name of the file.
  8. From the Type list, select (External File).
  9. From the File Name list, select the Data Group File you imported earlier.
  10. Click Finished.
ID 357725 The cli-settings ip-addr setting has been removed. The command is relevant only to bigpipe, which has been removed in version 11.0.0.
ID 361252 As a result of various bugs identified from customers, we have changed how persisted connections apply against ratio and fixed ratio load balancing behavior to better conform to what customers expect.
ID 362117 Provisioning settings are no longer included in ConfigSync operations. To completely sync all objects, all systems must be provisioned similarly.
ID 364288 Some objects that were accessible from any context in system versions prior to v11.0 are no longer accessible with the same scope. A user might receive an inappropriate error message during a list or modify command. If the system gives the incorrect error message, change context to /Common and attempt the command again.
ID 365635 The ssldump utility does not decode data when protocol is TLS v1.2. There is no workaround for this issue in this release. For information about the ssldump utility, see SOL10209: Overview of packet tracing with the ssldump utility, available in the AskF5 Knowledge Base.
ID 367753 In this release, the software uses ssmtp to perform mail forwarding to a mail host for locally generated email messages from the BIG-IP system. The Postfix mail transfer agent has been removed. You can find information on how to configure ssmtp in SOL13182 and SOL13182: Change in Behavior: Postfix has been removed from BIG-IP software and SOL13180: Configuring the BIG-IP system to deliver locally generated email messages (11.x) in the AskF5 Knowledge Base.
TMM move to 64-bit As memory density increases, F5 Networks has made the strategic decision to move TMM to 64 bit with the version 11.0 release. In moving to 64 bits, the Traffic Management Operation System (TMOS) provides performance benefits in areas such as the ability to address all the physical address space. For example, we can utilize the full 48 GB of memory on the new 11000 platform. We can now build systems that can address an almost infinite amount of RAM with enhanced algorithm performance. The move from 32-bit to 64-bit TMM does increase the number of pointers and memory used per connection; therefore, with version 11.0, for each platform, the number of concurrent connections will be less. This is not specific to F5 Networks: every ADC vendor that uses a 64-bit OS also has fewer-concurrent-connection capacity vs. the capacity on a 32-bit OS.

Known issues

ID Number Description
ID 221917 When the bd process restarts, the system stops all internal connections. If the next event that arrives on a halted connection is an HTTP request, the attempt to disable the plugin in HTTP_REQUEST fails, which logs a Tcl error to the /var/log/ltm file. This is a benign error message that you can safely ignore.
ID 221946 When you specify the cluster management IP address, the netmask defaults to /32, or In order to use cluster member addresses, the netmask must be no more than /30, or Always specify the netmask when specifying the cluster management IP address if you plan ever to use cluster member addresses. That way, the address always gets set correctly, and you can configure the cluster member addresses on the same network.
ID 221956 Beginning with version 10.0.0, the system reports module memory mixed in with memory used by all processes. To determine actual memory usage, you must use standard Linux commands, such as ps, top, and other similar commands.
ID 221963 When you are logged on to a cluster management address, and you or another user subsequently promotes one of the secondary blades to the primary, you and the other user might need to log on again.
ID 222005 "On boot, the following message might be seen. It is innocuous and can be ignored: err ti_usb_3410_5052.c: ti_interrupt_callback - DATA ERROR, port 0, data 0x6C"
ID 222034 If HTTP::respond is called in LB_FAILED with large headers and/or body, the response may be truncated. TCP congestion-control state determines the threshold. For example, with slow-start enabled, and no data sent to the client yet, the response will be truncated after two packets.
ID 222041 "If a blade is pulled from a chassis without shutting it down, it will be marked as failed (red) until a new blade is put into that slot or a cluster-wide reboot. To avoid this problem, shut down a blade before removing it from the chassis. To fix the problem if it occurs, either do a cluster-wide reboot (when this cluster is not in use) or place a spare blade in the slot, wait until it goes non-red, and then shut it down before removing it."
ID 222112 "When you start or stop the tcpdump utility on a VIPRION system, the system logs messages similar to the following entries in the /var/log/ltm file: slot1/tmm warning pu[24652]: 01230114:4: port movement detected for 00:01:23:45:67:10, vlan tmm_bp - 0.0 to 0.1 These messages are benign, and you can safely ignore them."
ID 222184 When the license expires, if you are on the License Summary page on a partition other than Common, the system automatically returns you to the Common partition, but does not activate the Reactivate button. The workaround is to select a different partition and then reselect the Common partition. This should reset the Reactivate button to an active state.
ID 222221 "TCP::close doesn't work properly with SSL-related iRules. To work around this, remove tcp::close from the iRule. Although the SSL connection works, it will not be closed until a timeout."
ID 222273 Many load balancing methods are implemented so that the system divides the connection limit among running Traffic Management Microkernel (TMM) services. If you set the connection limit to low values, the results you see might not be what you expect. For example, some nodes might receive more connections than you expect, and other nodes that you expect to receive connections might not receive any. These apparent anomalies are discernible only with small numbers of connections, and disappear with large numbers of connections.
ID 222287 On multi-core platforms running in CMP mode, rates configured in a rate class are internally divided between the active TMM instances. As a result, each flow is restricted to bandwidth equal to the configured rate divided by the number of active TMM instances. In order to achieve the actual rate set on the rate class, the system must be processing at least one flow on each active TMM instance. For more information, see SOL10858: Rate classes on CMP systems are divided among active TMM instances.
ID 222344 "Dynamic routes might override static management routes. If a route learned via any dynamic routing protocol exactly matches a management static route, traffic from the Linux host will follow the dynamic route. NOTE: Regarding affected modules, the problem affects any module provisioned in TMOS as the root cause is in the core functionality shared by all modules."
ID 222438 "PVA2 might return corrupted data in response to a virtual server stats query. When this happens, you might see messages in /var/log/ltm such as: pvad[2099]: mra_lbdb_vxo_basic_::deserialize(): wrong type 1 pvad[2099]: 01130004:4: ../Pva2AsicFactory.cpp:724 - Dropping stats msg. VSO deserialize failed. This can usually be fixed by running the command ""bigstart restart pvad"" Note that doing so will disrupt traffic for a short interval."
ID 222806 "If an httpclass selects a pool other than the default pool associated with the virtual, and the subsequent request on the same connection matches no httpclass, then the default pool is not applied; the previously selected pool continues to be used. Enabling OneConnect is a workaround for the base scenario. However, a similar issue resurfaces if RamCache is used in conjunction with OC. Either of the following should work, regardless of whether OC or RC are in use. 1. At the end of the httpclass list, include a catch-all httpclass (all selectors set to ""none"") which selects the desired default pool. 2. Configure the default in the virtual, as usual, but add the following iRule: when CLIENT_ACCEPTED priority 900 { set default_pool [LB::server pool] } when HTTP_CLASS_FAILED priority 100 { pool $default_pool }"
ID 223031 If you run the tcpdump utility from a Puma I blade on a VIPRION chassis containing a mix of Puma I and Puma II blades, the process does not show packets from the Puma II blades. To work around this issue, run the tcpdump operation from the Puma II blade.
ID 223191 (CR128182) If you remove all remote endpoints from a configuration, any active dashboard continues to show the last remote endpoint as connected. To refresh the screen, close the dashboard and then reopen it.
ID 223412 "When configuring a ConfigSync peer IP address, the IP address must reside in the default route domain. The default route domain has an implicit value of zero (0). ConfigSync operations will fail if you configure a peer address that contains an explicit route domain ID. For example: When a ConfigSync operation fails due to this issue, the BIG-IP system returns error messages that appear similar to the following example: Checking configuration on local system and peer system... Peer's IP address: Caught SOAP exception: Error calling getaddrinfo for (Temporary failure in name resolution) Error: There is a problem accessing the peer system. BIGpipe parsing error: 01110034:3: The configuration for running config-sync is incorrect."
ID 223421 If a disk is removed from an array, the serial number of the disk persists in the system until it is removed. There is no workaround for this issue.
ID 223426 Enabling the TCP option for MD5 signatures does not cause TCP connections without MD5 signatures to be rejected or ignored. Enabling MD5 signatures allows the MD5 signature to be validated when it is present. Note that the problem does not affect TCP connections established from the host (for example, BGP connections).
ID 223542 You cannot simply change the speed of an existing interface in a trunk, you must either delete all the interfaces and add them back at the new speed, or delete the trunk and recreate it.
ID 223634 If you are in the tmsh utility, you can run the bigpipe utility to view dynamic Address Resolution Protocol (ARP) entries for a different route domain. To do so, run the command run util bigpipe arp <args...> at the tmsh command line.
ID 223651 An SFTP client may emit an error message containing "Received message too long" when the user is unprivileged and may not use sftp.
ID 223704 When you import a single configuration file (SCF file) that contain VLANs of the same name but in different administrative partitions, the operation fails with a BIGpipe unknown operation error. To work around this issue, before installing an SCF file, run the tmsh load sys config default command. This returns the system to the default configuration, so subsequent configuration import operations should succeed as expected.
ID 223720 If you restart the mcpd process and try to create a FIPS key, the operation occasionally fails with the message Key generation failed: error 11 - Would overwrite file To work around this, restart mcpd and try the operation again.
ID 223796 When an SFP is not inserted in a VIPRION interface socket, the interface status should show "MS" (missing); instead, the interface status might show "DN" (down).
ID 223830 It is possible that with increased throughput, SNMP stats might report lower TMM CPU usage values than top.
ID 223885 The hash persist profile was extended in 10.0 with new options, but is no longer supported in combination with FastL4 virtuals. The workaround is to use universal persist instead. You can also use the TCP or UDP profile instead of FastL4.
ID 223890 "In v10.0, LB-related ratio values of up to 65535 were allowed in configs and via iControl. Currently, validation prevents any value greater than 100."
ID 223944 Under certain conditions, a given clusterd can start logging to /var/log/ltm at level "info" saying "Timer late 0.001999696 seconds" continually. This has been observed as frequently as every 20-30 seconds on primaries only. If the timer is late on the order of milliseconds, as it is in this example, this message can be safely ignored.
ID 223954 The system does not include the .tmshrc file in a ConfigSync operation. That means that each unit in a high availability configuration might have a different set of remote users. You can manually sync the files by using a utility to copy the file from one system to the others.
ID 223959 A BIG-IP system has limits to the number of objects that may be configured when the configuration contains virtual servers for which Packet Velocity ASIC (PVA) acceleration is required. If more than the specified maximum number of objects is configured, virtual servers that otherwise qualify for PVA acceleration are demoted to wire mode (no PVA acceleration). For more information about the maximum number of objects allowed for the PVA, refer to SOL11038: Configuration sizing and PVA acceleration.
ID 223961 "You can create an external monitor that references an executable in the /usr/share/monitors directory. On a VIPRION system, when the system attempts to validate the monitor on a secondary blade (for example, when the primary blade loads a secondary blade), the system posts an error message similar to the following: emerg mcpd[2822]: 0107094e:0: File cache: fatal error (can't create backup file for (/usr/bin/monitors/builtins/SYSLOG_monitor), Read-only file system) (FileCache.cpp:1523) For the monitor to function properly and to prevent this error on VIPRION systems, copy any executable used by an external monitor to the /config/monitors directory."
ID 224073 Floating route domain self IP addresses do not respond to ping utility commands from the Linux host. If you need to access floating IP addresses using the ping utility, use an external source.
ID 224142 There is a pause negotiation mismatch in a trunk containing a mix of fiber and copper. To work around this issue, do not mix fiber and copper in the same trunk.
ID 224195 The system does not prevent you from deleting a self IP address that an EtherIP tunnel uses, or from creating an EtherIP tunnel using nonexistent IP addresses. Doing so, however, results in an inoperable tunnel. To ensure that an EtherIP tunnel operates as expected, do not delete any of the self IP addresses that are associated with VLAN "wan" and specified in the EtherIP tunnel object.
ID 224208 "The tcpdump utility, when run on a BIG-IP, may fail to capture some packets when processing traffic from a vlan. Some conditions that could cause this are: - Inserting data at the beginning of TCP payload in an iRule with the ""TCP::payload replace"" command. - The presence of TCP timestamps on only one of the clientside or serverside connections."
ID 224294 "SASP monitor validates timeout and interval although these values are not used by the monitor."
ID 224313 The system does not support state mirroring with overlapping IP addresses. If you configure connection mirroring using route domain-compatible state mirror IP addresses, the system does not mirror the connections.
ID 224372 When you are connected using the serial console to a multi-drive platform, you might see messages similar to the following: warning kernel: RAID1 conf printout and warning kernel: disk 0, wo:0, o:1, dev:dm-14. The messages are also logged in /var/log/kern.log file. These messages appear during the time a drive is rebuilding, and you can safely ignore them. Note that the messages appear only when you are directly connected by serial console. They do not appear when you are logged in using SSH.
ID 224402 When you specify a custom ConfigSync user (that is, an account other than admin), if you have specified a maximum number of password failures, the ConfigSync account is subject to the password lockout after the specified number of failures. To work around this issue, use the admin account as the ConfigSync user, or reset the non-standard account that is locked out.
ID 224406 The dashboard cannot handle numbers that exceed 32 bits. If a statistic goes above that number, dashboard values will be incorrect.
ID 224520 The bcm56xxd service's small form-factor pluggable (SFP) plug_check mechanism (for example, bs_i2c_sfp_plug_check()) looks for module-detect signal changes every five seconds, and can miss a pluggable media type swap (that is, a swap from fiber SFP to copper SFP or SFP+) because the check does not look at pluggable media type changes. This can result in link failures, due to internal media settings that are still associated with a previously populated pluggable module.
ID 224665 VLAN groups are partitionable objects, so that a VLAN group created in one partition cannot be modified in another partition. Proxy exclusion is a VLAN group setting, so the partition restrictions should be in effect. However, the system does not prevent you from adding proxy exclusion for a VLAN group in another partition. Doing so results in issues for VLAN groups, so you should not attempt such a configuration.
ID 224698 Plugin-initiated connections do not use a SNAT pool, if configured (formerly CR 137381).
ID 224781 Pagination does not work properly in the browser-based Configuration utility when using the Status filter. The workaround is to look through all pages when using that filter in order to determine the number of objects with the selected status.
ID 224881 On AOM-equipped platforms, changing the management IP via the front-panel LCD multiple times might result in fields on the LCD being displayed with a value of
ID 225019 Network interfaces remain active even if they're disabled in BIG-IP. If it is desired to temporarily remove traffic from a network interface, simply disconnect the network from the interface using controls available in the hypervisor interface.
ID 225242 The nodes are not marked up until after the timeout has elapsed for default UDP monitors.
ID 225417 The installer allows you to install version 9.x software onto 8950 (D107) or 11050 (E102) platforms; however, version 9.x software does not support the 8950 or 11050 platform. Installing 9.x software onto 8950 or 11050 platforms might result in a nonfunctional system, so do not install version 9.x software onto 8950 or 11050 platforms.
ID 225431 Disabling the LCD display is not persistent across system restarts. This is for diagnostic purposes.
ID 225521 "On a partitioned system, if a 9.x installation operation fails or halts for any reason, including being canceled by the customer, subsequent installation operations fail and post the following messages to the liveinstall.log file: info: /dev/sda5 is mounted; will not make a filesystem here! error: VolumeSet_rebuild_fs(sda, 1) failed Terminal error: Failed to install. See log file. To work around this issue, always reboot the system after a failed installation operation, and then try the operation again. Note that this occurs only with halted version 9.x installation operations. Halted version 10.x installation operations do not exhibit the issue."
ID 225588 Error conditions such as unreachable IP addresses, and unavailable TACACS+/RADIUS services, are not logged to /var/log/ltm for the TACACS+ RADIUS audit forwarding accounting feature.
ID 225851 tmsh does not have a facility for removing "missing" array members. When an array member is physically removed from a system, the serial number will remain on the system, listed as a "missing" disk. If you need to remove this serial number from the list, you will have to use the GUI or the "array" command on the CLI.
ID 226564 "The LTM Statistics and GTM Statistics dashboard components might perform very slowly and/or cause out of memory errors when used in environments with large configurations (e.g., thousands of LTM and/or GTM objects)."
ID 226791 Due to screen limitations, the BIG-IP system LCD cannot display serial numbers larger than 16 characters. To see larger serial numbers, use the GUI or a tmsh command.
ID 226964 "Node marked down by a monitor that is waiting for a manual resume mistakenly displays ""Enabled"" state in its GUI properties while it stays down. In v11.0.0, the workaround is to click the Update button, which truly enables the node."
ID 227189 "When all evals have expired, the web browser shows the ""All Evaluations have Ended"" warning only if one or more evaluated modules are provisioned. The command line shows ""EvalExpired"" regardless of which modules are provisioned. The web browser behavior is new in version 11.0. The command-line behavior is as it was in version 10.x."
ID 227272 If you replace a tri-speed copper small form-factor pluggable (SFP) module with a fiber SFP, you may have to reinsert the fiber SFP module a second time before it accurately reports link status. To work around this, remove and reseat the fiber SFP module.
ID 227281 When a full-proxy HTTP virtual with ramcache, fallback, and deferred accept configured executes reject command in CLIENT_ACCEPTED event, TMM restarts.
ID 227319 Ramcache configurations which approach the limit of total memory allowed for use by ramcache might cause caching to be disabled for one or more virtual servers.
ID 227358 Using the source port preserve strict option requires special considerations to ensure proper traffic flow and distribution.
ID 227362 When you are using Fast L4 profiles, make sure to set the PVA Acceleration setting to None if you also specify the Mimic setting for IP ToS to Client or IP ToS to Server. Otherwise, the system cannot perform the mimic functionality.
ID 227368 Connections stall indefinitely beyond their timeout when clients send pipelined HTTP requests to virtual servers with fallback hosts configured, half-closing their connections and triggering a load balancing failure.
ID 227369 "Generating a SIGINT or SIGQUIT on the serial console during login causes all services to die and restart. Further, SIGQUIT may cause chmand and get caught in a loop of failed restarts, requiring a host reboot. This was fixed in 9.x and 10.0.x, but that fix had to be reverted in 10.1.0 and after. No longer occurs after the first successful login from the console."
ID 246825 When you click the Clear Performance Data button in any view, the operation clears data for all historical statistics, not just the data for the specific view you are in.
ID 246871 When you are on the license summary general properties screen and you refresh the browser after you reactivate a license, the system prompts you to log on again. There is no workaround for this issue.
ID 246890 The system does not prevent you from using the command line to delete all volumes, including the active volume. Doing so causes the system to boot into another location. To prevent potential system access problems, do not use the command line to delete the active volume.
ID 246941 If you reset the Host on a platform that contains an SCCP after the system has completed initialization, the system attempts to PXE boot, making DHCP requests repeatedly and indefinitely. The workaround is to first use the SCCP Command Menu option 2 to put the SCCP into the proper state, and then reboot the system. You can also recover by powering the unit off and back on again.
ID 246962 The system counts route domain health check traffic as part of IPv6 traffic statistic totals. If your configuration has a monitor on a pool in a routing domain, you will see an increase in IPv6 traffic. If you remove the monitor from the pool, the IPv6 statistics freeze (assuming there is no actual IPv6 traffic). There is no workaround for this issue.
ID 246978 When you reboot a system from the serial console, the system reports the following message modprobe: modprobe: Can't locate module tun6to4... during the shutdown sequence. This message is benign, and you can safely ignore it.
ID 246983 A display issue in the browser-based Configuration utility makes it appear as if users can modify user settings that they should not be able to access. For example, a user logs on using an account assigned a non-administrator role. When that user changes the password and clicks Update, the screen temporarily redisplays with available settings for file, partition, and shell access. The user can manipulate the controls, and select different settings. However, the system does not accept the change.
ID 246984 This release supports only network failover for chassis-to-chassis failover on the VIPRION platform. Do not configure hardwired failover using any failover cable included with the VIPRION platform you received.
ID 247011 "Unlike in SSL profiles, the system does not validate keys and certificates used for SIP and HTTPS monitors. That means that you can specify non-matching or invalid keys and certificates. There is no checking on the command line or in the browser-based Configuration utility to make sure keys and certificates are valid and usable."
ID 247012 If you use a SIP or HTTPS monitor on a server that requires authentication using a certificate signed by a certificate authority (CA), the monitor must use certificates signed by a CA that the server recognizes. Do not configure a monitor using certificates signed by an Intermediate CA because the monitor does not send such certificates to the server.
ID 247062 Beginning with version 10.0.0, the system reports module memory mixed in with memory used by all processes. To determine actual memory usage, you must use standard Linux commands, such as ps, top, and other similar commands.
ID 247070 "In the browser-based Configuration utility, if you try to set the provisioning level to Dedicated on a module when another module already has the Dedicated provisioning level, the system allows the change and sets the provisioning level to None on all other modules. When you use the command line for the same operation, the system presents an error: When a Dedicated provision level is set, all other module's provision levels must be set to None. To accomplish the change, you can use the Configuration utility, or you can use the command line to set the provisioning level to None for all other modules, and then set the Dedicated provisioning level on the module you want to configure. To do so, use the tmsh utility to issue the following commands (substituting your module names for <module-A> and <module-B>): (tmos)# create transaction batch mode](tmos)# modify sys provision <module-A> level dedicated batch mode](tmos)# modify sys provision <module-B> level none batch mode](tmos)# submit transaction"
ID 247076 The BIG-IP 8800 platform supports a maximum of 30,000 monitors in a single configuration. If you create more than 30,000 monitors, the BIG-IP 8800 might halt in a switchboard-failsafe state when you load the configuration.
ID 247094 If you have state mirroring enabled, when you upgrade one unit of a redundant system, the system post messages until all systems are running the same version of the software. tmm tmm[1917]: 01340001:3: HA Connection with peer established. There is no workaround for this condition. All units in a redundant system must be running the same version of the software.
ID 247099 After an import default operation, the prompt is set to reboot, but the operation does not instigate the reboot operation on the primary blade, although it does on the secondary blade. This is intentional behavior: the operation causes a reboot on secondary blades, but the primary blade does not reboot automatically in this case. To activate the imported configuration, reboot the primary blade.
ID 247122 When a system timeout occurs, the system grays out the screen behind the timeout alert box. Although you can access the browser window scroll bars to view the contents of the grayed-out screen, none of the options are active.
ID 247156 If you deprovision a module, the system does not remove the configuration attributes associated with the module. Some configuration data, such as endpoint attribute definitions for the WAN Optimization Manager, might interfere with Local Traffic Manager tunnel operations. In this case, when the definitions for endpoint advertised route, endpoint local, and endpoint remote remain in the configuration after deprovisioning WAN Optimization Manager, the Local Traffic Manager tunnel resets connections that were established when you had the module provisioned. As a workaround, remove the definitions from the bigip.conf files on both BIG-IP systems.
ID 247200 When a user configured for one role is logged on to the browser-based Configuration utility, and you change that user's role to another type, also using the Configuration utility, the system logs off that user. When that user logs back on, the system writes to the catalina.out file error messages such as Error while reading message at. These messages are benign, and you can safely ignore them.
ID 247216 The help frame crops the right edge of some of the formula definitions on the Performance statistics screen. As a workaround, you can click the Launch button to view the full text.
ID 247241 "Occasionally, when you create an installation repository on a USB thumb drive from the BIG-IP system, the operation fails while copying the repository files to the thumb drive. (The failure might also occur when reading or writing any large file to the thumb drive from the BIG-IP system.) When the failure occurs, the system reboots and writes a log entry similar to the following in the /var/log/ltm file: Dec 10 11:13:12 local/8900 notice overdog[2401]: 01140108:5: Overdog scheduling exceeded 1/2 timeout of 5 seconds (measured:8060 ms) The workaround is to create the installation repository on a USB thumb drive using a Linux workstation, as documented in the BIG-IP Systems: Getting Started Guide. In any case, do not perform the operation on a BIG-IP system that is actively in production to prevent the potential failure from affecting live traffic."
ID 247300 "You should not use the SSL::respond method with a CLIENTSSL_CLIENTCERT iRule event with a COMPAT mode cipher, as it can result in a handshake failure."
ID 247310 There is an extremely rare chance that, if the high-availability mirroring connection fails and recovers, the result might be a new persistence record and an expired record using the same key to send their respective messages. For example, if a record comes in that would have matched an old one on the active system, it is possible that the old record's expiration action might arrive after the new record's update action. If the key matching the old record expires, the standby system incorrectly deletes the corresponding new record.
ID 247559 --nosaveconfig: Do not save and restore config --nomoveconfig: Save/restore in same location; the installation location tmsh modify db liveinstall.moveconfig value disable tmsh modify db liveinstall.movelicense value disable tmsh modify db liveinstall.saveconfig value disable tmsh modify db liveinstall.savelicense value disable
ID 247625 If you are using a Firefox version earlier than v3.0 and a Flash plug-in earlier than version 9, Firefox issues a Shockwave Flash error when you attempt to launch the dashboard. To avoid this problem, install the latest version of Firefox.
ID 247709 "When you change the idle timeout in System :: Preferences, the system must restart the httpd process. This results in a set of error messages similar to the following example: err httpd[6246]: [error] [client] Invalid method in request OPTIONS * HTTP/1.0 err httpd[6320]: [error] (9)Bad file descriptor: apr_socket_accept: (client socket) warning httpd[3064]: [warn] RSA server certificate CommonName (CN) `dhcp-137' does NOT match server name!? warning fcgi-[6376]: [warn] FastCGI: server ""/usr/local/www/mcpq/mcpq"" started (pid 6377) err httpd[6379]: [error] [client] Invalid method in request OPTIONS * HTTP/1.0 warning httpd[3064]: [warn] long lost child came home! (pid 6239) These messages occur primarily as a result of the process restart, and you can safely ignore them."
ID 247727 When you create a new profile or edit an existing profile using the all-properties option of the tmsh utility, unless you remove some options, all properties become custom; that is, profile properties no longer inherit parent settings. The workaround is to use the tmsh utility create and modify commands operations. When you do so, the system preserves the profile's properties inheritance.
ID 247742 Using an iRule command that suspends operation (for example, after, table, and persist), in a NAME_RESOLVED event causes the iRule to never resume. The workaround is to use the RESOLV::lookup command that suspends operation until resolution, and then returns the lookup result inline.
ID 247894 "iRule substr function is not able to use a string with a number in it as a terminating string. Instead it converts that string to integer and mistakenly uses it as a substring length."
ID 247909 You might encounter an issue in which the NTP servers do not sync after a system reboot. You can recognize this by running the command ntpq -p to determine whether some of the NTP servers continue to have a refid of .INIT. You might find the issue more pronounced on the VIPRION platform because every blade is an NTP peer of every other blade. (Note that a refid of .INIT is normal for any system with no defined NTP server. F5 strongly recommends defining an NTP server.) This appears to occur only on networks accessible through VLANs, and does not occur with NTP servers serviced by the management port. The issue can be particularly problematic for IPv6 addresses because the system caches the unreachable destination information. To work around the issue, when tmm is up and servicing traffic, run the command bigstart restart ntpd to restart the ntpd process.
ID 247918 TMM might crash if you run the commands b import default or tmsh load sys config default on a BIG-IP system with dynamic routing configured and active. Removal of a self-IP address on a VLAN with dynamic routing peers also might trigger the same problem. The system indicates the problem by presenting TMM panic messages containing the following text: Assertion "link route present" failed. In order to avoid the problem, do not run the commands b import default or tmsh load sys config default if dynamic routing is configured and active on the BIG-IP system, and do not remove self-IP addresses on VLANs with dynamic routing peers.
ID 248489 If the user configuration set (UCS) file you roll forward at installation time contains a problem, subsequent system load operations can fail. If this happens, the remote users and administrators cannot log on to the system. To work around the situation, log on to the system as the root user or as the admin local user.
ID 248550 For a group name that contains spaces, the LDAP valid_group attribute is not properly escaped with square brackets (formerly CR 88837-1). The workaround is to not use spaces in valid groups.
ID 248932 "Occasionally, a system restart might result in the system posting to the console messages of the following type: sshd(pam_audit)[4559]: user=root(pqizzjl1l) tty=/def/pts/1 host= attempts=1 start=""Tue Aug 5 17:25:09 2008"" end=""Tue Aug 5 17:27:54 2008"". sshd(pam_audit)[4559]: 01070417:0: AUDIT - user root - RAW: sshd(pam_audit): user=root(pqizzjl1l) tty=/def/pts/1 host= attempts=1 start=""Tue Aug 5 17:25:09 2008"" end=""Tue Aug 5 17:27:54 2008"". These messages occur when the system shuts down logging to the syslog-ng file before all users who are logged on have logged off. Should this error occur, when the system comes back up, you can use the boot marker in the audit files to confirm that the system logged out the remaining users."
ID 248958 Running the tmsh or bigpipe command persist show on a cluster might return incomplete results in certain avoidable situations. To ensure complete results, leave the tmsh bigpipe shell read partition at all, and log on as a user who is authorized to view all partitions.
ID 249083 Address wildcard virtual server has to be deleted and re-created when changed from IPv6 to IPv4. Without the intervening deletion, neither IPv6 nor IPv4 traffic matches the virtual. It works as expected when changing from IPv4 to IPv6 (formerly CR 98831).
ID 283445 "(CR98760) When you convert an encrypted key to Federal Information Processing Standards (FIPS) key, the system presents the error: Unsupported key size and does not perform the conversion. To perform a successful conversion in this case, you must use the command-line utility to decrypt the key, and then convert the key to a FIPS-type key."
ID 284910 Once you configure the BIG-IP system to use the base FastHTTP profile, the profile continues to prime server-side connections, even if there are no virtual servers currently configured to use the FastHTTP profile.
ID 285008 If the active unit in a redundant system reboots, the standby unit goes active and handles any established connections that were mirrored. However, when the previously active box comes back up, it does not re-synchronize the state for the mirrored connections. This means that the mirrored connections are lost in a subsequent failure or a forced fail-back. This does not affect connections that end before the second restart and failover. Also, this does not apply to Fast L4 profiles.
ID 291260 If you are viewing a statistics screen, the user session logged in to the system does not time out as it does when viewing other screens. If you need to maintain the regular timeout interval for logged in users, then navigate away from a statistics screen.
ID 291272 If you attempt to mirror virtual servers that have RAM Cache enabled, depending on the cache state, the system leaks the connection on the standby unit when the connection is closed on the active unit.
ID 291327 Configuring a virtual server for multicast communications inside a route domain does not work. Do not configure a virtual server for multicast communications inside a route domain.
ID 291373 The small form-factor pluggable (SFP) ports on BIG-IP 8900 platforms are 10Gbps-only ports. On a BIG-IP 8900 platform, a SFP plus can operate at 1Gbps speed in an SFP slot, but SFP modules do not operate at 1Gbps speeds in an SFP plus slot. This is a hardware constraint.
ID 291541 If there are static Address Resolution Protocol (ARP) entries targeted to the management network in either the existing configuration or in the configuration being installed or used in a ConfigSync operation, the configuration may fail to load. To work around the issue, first delete any static ARP entries targeted at the management network and then complete the configuration load or ConfigSync operation.
ID 291689 "When you use the Weighted Least Connections (Node) load balancing method, you must set a connection limit for each node prior to adding the pool member to the pool. In this release, you must use the following process to accomplish this. 1. Create a pool that uses the Weighted Least Connections (Node) load balancing method. 2. Explicitly create the node entries for the pool members on the Local Traffic Nodes Node List (create) screen. 3. For each node, specify a value other than 0 (zero) in the Connection Limit box. 4. Return to the pool configuration screen by clicking its link in the Local Traffic Pools Pool List. 5. Select the Members tab and add the pool members to the pool, using the same IP addresses as the nodes that you configured in the earlier step. If you fail to specify the connection limit for the node prior to adding the pool members, the system presents a configuration validation error."
ID 291704 If you replace a copper (Cu) small form-factor pluggable (SFP) with a fiber SFP, the link might remain down, even when connected to an active peer. The workaround is to issue a bigstart restart bcm56xxd command. From the command line, 'bigstart restart bcm56xxd'.
ID 291719 "When the Configuration Utility restarts, the system writes the following messages to catalina.out: log4j:ERROR A ""org.apache.log4j.ConsoleAppender"" object is not assignable to a ""org.apache.log4j.Appender"" variable. log4j:ERROR The class ""org.apache.log4j.Appender"" was loaded by log4j:ERROR [org.apache.catalina.loader.StandardClassLoader@1359c1b] whereas object of type log4j:ERROR ""org.apache.log4j.ConsoleAppender"" was loaded by [WebappClassLoader These messages are benign, and you can safely ignore them."
ID 291723 "At system startup, you might see messages similar to the following: mdadm: Unrecognised md component device - /dev/mapper/ mdadm: Unrecognised md component device - /dev/mapper/ This occurs because datastor volumes are not intended to be combined into a redundant array. The disk management subsystem unintentionally tries to join them into an array, but fails. No adverse result occurs, and you can safely ignore these messages."
ID 291742 In the ltm.log file, you might see mcpd warning messages similar to the following: warning mcpd[3002]: 01070156:4: Could not remove file /config/bigip/auth/pam.d/tmm_ldap. Please remove this file manually. When you navigate to the specified directory, you do not find the files. These messages are incorrect, and you can safely ignore them.
ID 291756 On a multi-drive system, if the LED is flashing when you remove a drive from the unit, the LED status does not turn green (as it should) when disk replication begins. If the LED is not flashing, the LED turns green immediately in the transition to replicating a drive. This is a cosmetic issue only, and has no effect on functionality.
ID 291761 When you complete a new installation, the Firefox browser may not recognize the SSL certificate. When this occurs, the browser-based Configuration utility posts the message Please wait while this BIG-IP device reboots, shutting down device. This spins forever and never returns. This behavior is Firefox-browser specific, so when the certificate is no longer viewed as valid, the Firefox browser ignores subsequent HTTP requests. The issue happens only when doing a fresh install. A configuration you roll forward includes the device certificates, so this is not an issue. The Microsoft Internet Explorer browser posts an accept-certificate dialog box when you restart the system.
ID 291767 The version of the image2disk utility that shipped with version 9.4.5 does not support the -format option. You can install a new version of the image2disk utility from a version 10.x ISO. First, to uninstall the version of the utility that shipped with 9.4.5, run the command rpm -e tm_install-2- The command removes the utility, but posts no message at completion. Then, to install a new version of the utility, run the command im /var/tmp/<iso_file>. For more information, see SOL10702: The image2disk utility that shipped with BIG-IP version 9.4.5 does not support the --format option.
ID 291768 If you create VLANs in an administrative partition other than Common, but do not create a route domain in that partition, then the VLANs you create in that partition are automatically assigned to route domain 0. If you later change the default route domain of that partition, the VLAN stays in its existing route domain, unless the VLAN has a self IP address or virtual IP address assigned to it. In that case, the VLAN moves to the new default route domain.
ID 291776 You might see an intermittent blank top banner in the browser-based configuration utility after an upgrade or installation operation. This might be especially likely when you use Microsoft Internet Explorer version 7 on a VIPRION system, and you leave the browser window open between the end of installation and the completion of the reboot operation. In this case, when you log on, the top banner is blank. You can use the browser refresh operation (F5 or Ctrl + F5) to redisplay the banner correctly.
ID 291777 The software does not support running small form-factor pluggable (SFP)+ on SFP ports on VIPRION systems that contain PB100 blades, even if the ports are running at 1 GB. Although the system does not prevent you from doing so, and you might find such a configuration functional, we do not support nor recommend running in this configuration.
ID 291784 If you set the import save value to 1 and import a single configuration file (SCF), the import operation halts and does not resume. To work around this issue, set the import save value to 2 or more.
ID 291786 When you use the domaintool utility to delete a domain when you are configuring Kerberos delegation, if that domain serves as the default, the system removes the domain but leaves it as the designated default. To work around this issue, change the default to a different domain before the delete operation.
ID 291788 "Certain packet-size related events can result in messages similar to the following: crit tmm4[5689]: 01010025:2: Device error: hsb internal error PIM_RX_PORT_0_ERRS address 0x0000103c status 0x004e0100 These messages are benign, and you can safely ignore them."
ID 305069 "Using the COMPRESS::disable call in an HTTP_REQUEST event in an iRule does not work. As a workaround, use the COMPRESS::disable call in an HTTP_RESPONSE event instead."
ID 305091 You can create duplicate virtual servers with same address space that are enabled on different VLANs in the same partition. But you cannot create duplicate virtual servers with same address space enabled on different VLANs if the VLANs are in different partition.
ID 305096 When using the vi editor to edit files on the BIG-IP 6900, you might have to enter as many as three escapes to return to command mode from insert mode.
ID 305319 SNMP queries for ltmUserStatProfileStat values does not return accurate values for user stat profile fields. Instead, the system returns a 0 (zero) or a negative number as the value. There is no workaround for this issue.
ID 305320 Thumb drive installation fails when the drive contains two product installation images. To work around this issue, use thumb drives that contain only one image for installation.
ID 305380 "If you initialize the Federal Information Processing Standards (FIPS) card and convert non-FIPS keys to FIPS keys, you must reload the configuration (using the tmsh load command) or restart the tmm process (using the bigstart restart command) before the system starts using the keys. Assuming you have an SSL profile that uses the newly converted FIPS key and you plan to reload the configuration, here is the command sequence to run: fipsutil -f init convert non fips key to fips load /sys If you try to run the system without reloading the configuration or restarting the tmm process, the system issues the following errors: 01260009:7: Connection error: ssl_hs_vfy_pms:2128: invalid pre-master secret (80) Connection error: ssl_basic_rx:232: mac miscompare (20)"
ID 307982 Which platform you are using determines how the system calculates the hash to distribute packets to the trunk. On the VIPRION platform, the BIG-IP 6900, and the BIG-IP 8900, the system includes the port in the hash. On the other systems, the system calculates the hash using only the IP address. So when you specify source/destination IP address for the trunk distribution command, if the platform is one of the ones listed previously, the system creates the hash from the source/destination IP address and the TCP/UDP port. Otherwise, the system creates the hash from the source/destination IP address only.
ID 315650 "In order to change the baud rate when you are using a serial terminal console server on the VIPRION platform, you must follow a specific sequence to change the baud rate in three places, or you can lose communication with the system. 1- On each blade in the system, run the following command: bigpipe baud rate <your_baud_rate_value> Make sure to complete this change on all blades in the system before proceeding to step 2. 2- Next, change the Serial Port Redirector (SPR) baud rate by pressing ESC( to access the SPR Command Menu. When the menu opens, select B -- Set baud rate, and select from the six settings displayed. 3- Finally, change the baud rate of your serial terminal server. The syntax for completing this step varies depending on the terminal server you are using, so you should consult your serial terminal server documentation for more specific information."
ID 315763 When the pvad service queries a very large number of objects (for example, 2000 nodes), the pvad service might use as much as 27% of CPU. This condition is intermittent, and might have other requisites. There is no workaround.
ID 323632 When you delete an interface that is configured for interface mirroring, the system halts mirroring on all other configured interfaces. To work around this issue, when you delete an interface-mirroring configuration, recreate the configuration using all interfaces. As an alternative, after deleting an interface, save the configuration and issue the command bigstart restart.
ID 326906 When you swap a blade to the same slot in a different VIPRION chassis, the system uses VLAN MAC addresses based on the old chassis. The workaround is to avoid moving a blade to the same slot in another chassis. If necessary, shift blades around in the target chassis so that the incoming blade always goes into a slot that is different from the one it came out of.
ID 333357 On first boot after initial installation on VIPRION systems, occasionally the system needs to reboot. In these cases, during the shutdown preceding reboot, you may see warnings from bigstart about getdb failing. In this context, these messages are harmless and may be ignored.
ID 335619 Occasionally during system startup, you might see an error message similar to the following: err : Could not make connection with MCP, err 16908360 The error is benign, and you can safely ignore it.
ID 336885 There is a memory leak that affects Firefox 3.6 but not Internet Explorer 8. The leak occurs because of an interaction between the dashboard and the web browser. The workaround is to use Internet Explorer to view the dashboard.
ID 336986 If a hard drive is in the process of replicating and an install to a non-existent volume set is started, the array status for the replicating drive will transition to "failed" while the volume sets are created. They are created at the very beginning of the installation, so this failed status should last no more than 1 minute. After the volume set is created, the status will go back to "replicating", as expected.
ID 337222 When creating an IP-based datagroup/class, any route domain information that is specified as part of the datagroup entries will be ignored by the iRule class, matchclass and findclass commands.
ID 337583 "When using the percent up cluster members feature of ha-groups, the cluster member portion of the ha-group is not loaded correctly after a reboot (or mcpd restart)."
ID 337774 When you tab-complete the command "tmsh show sys raid bay", the results show eight bays. This only affects platforms in the Apollo family, which have 4 bays.
ID 338390 If a user creates a new monitor ("inherits") from an existing user-created monitor on the system, then the enable/disable values will not inherit properly. All of the binary values will be set to disable despite user command-line input for the creation of the item.
ID 338426 Clusterd can core on shutdown under certain circumstances, seen only so far with vCMP. It only happens when clusterd is shutting down, after it has taken care of all notifications to other system components, so the core can be safely ignored.
ID 338450 "On VIPRION blades, the BIG-IP system might log error messages about kernel-owned interfaces similar to the following messages (these are innocuous and can be ignored): slot1/mychassis notice chmand[3782]: 012a0005:5: Tmstat::updateMgmtIf: HAL Svc error: MiiNic: failed to send cmd to driver: readPseMii ioctl on: eth2Phy & Reg:1e:1a returns:Invalid argument slot1/mychassis notice chmand[3782]: 012a0005:5: Tmstat::updateMgmtIf: HAL Svc error: MiiNic: failed to send cmd to driver: getStatusReg: timeout wait for result"
ID 338799 "If a pool has all members down/disabled but is enabled itself, it shows up as green with the error message ""The children pool members(s) might be disabled."" There is no workaround for this issue."
ID 339681 tmsh does not support multiple .iso file installation with one command. This feature was part of bigpipe utility command set, but has yet to be introduced to tmsh. To work around this, issue each .iso file installation separately in a script or transaction.
ID 341928 A CMP redirected looped virtual (i.e., VIP targeting VIP on a different cluster node) can crash TMM.
ID 342319 The parameters "recursion yes" and "forward only" are not being updated in named.conf when creating entries in the BIND Forwarder Server List from the GUI.
ID 342325 If username and password have not been configured for a RADIUS accounting monitor, it will try to connect with a <NULL> username-password.
ID 342423 "The statsd process computes the value for system-wide CPU usage using a formula: process ""A"" CPU usage divided by the number of CPUs on the chassis. Assuming a chassis is fully populated with PUMA I blades, the average is divided by 16. If a blade drops out, the number of CPUs is now 12, so while that blade is out of circulation, the data is divided by 12. However, even for the 5-second window: it is possible that the average might be calculated incorrectly. Example =========== From time1 to time4, there are 16 CPUs on the box, and processA is using 96% of its CPU. At time5, one of the blades drops out. The calculation to compute CPU and system usage happens at this time. Before the blade dropped out, the system-wide average was 96/16 = 6. When the blade drops out, the system-wide average is 96/12 = 8. That is a small difference. Although blades going down should not happen often, when it does happen, it is only the first 5-second system-wide average that is affected. The next average will be correct."
ID 342670 Some disk management interfaces show the shelves with letters and some use numbers. For now, shelf 1 == a and shelf 2 == b between interfaces.
ID 343467 Due to limitations in the firmware of the Cavium CN1620 FIPS 140 certified crypto accelerator, synchronization of FIPS security domains cannot be performed more than once every 5 minutes from the same device (i.e., using the device as the source for the synchronization).
ID 344226 Trying to create a CRLDP server using a name that already exists fails with the message "An error has occurred while trying to process your request." A more accurate message is "The requested CRLDP server (<crldp_server_name>) already exists in <partition_name>.".
ID 344698 The provisioning level for vCMP should only be set to "dedicated" or to "none". Other levels are not supported and might not work.
ID 345092 "When a RAID system is booting, the system posts the message: Press <CTRL-I>; to enter Configuration Utility... However, pressing Ctrl+I has no effect. It is not possible to enter the Configuration utility this way. This is a hardware constraint. Instead, you can configure RAID parameters through TMOS."
ID 345529 The BIG-IP Configuration utility may incorrectly allow you to assign certain health monitors to pools while their pool members are configured with a wildcard service port. To workaround this issue, make sure to specify an Alias Port on a monitor when it needs to probe a specific service port on wildcard pool members. For more information, see SOL12400 at
ID 345930 The "IPv6 NoError Response" and "Enabled" fields are missing input controls for Inbound Wide-IPs in the Link Controller UI.
ID 346354 The cli admin-partitions update-partition is still available, though it should have been removed. The only available option shown with tab complete is none and this gives an error.
ID 346875 Even though the vg-reserved attribute is shown via "tmsh list sys disk" command. It is not supported on SSDs, and does not reserve the 1024 that is shown.
ID 347073 Configuration changes to objects are not immediately reflected in the LTM Statistics and GTM Statistics widgets in the dashboard.
ID 347174 "When starting BIG-IP VE on a Hyper-V platform, the BIG-IP VE system posts multiple Advanced Configuration and Power Interface (ACPI) messages such as: ACPI: LAPIC (acpi_id[0x3f] lapic_id[0x3e] disabled) These messages are expected and you can ignore them."
ID 348214 The openssl s_client command defaults to secure renegotiation. To support servers unpatched for secure renegotiation use the -legacy_renegotiation option instead.
ID 348502 It is highly recommended to only use tmsh commands or iControl to delete vdisks. Deleting or renaming a vdisk from the file system (e.g., using bash) will not be detected by vcmpd and can lead to unexpected behavior if the system later attempts to use that vdisk.
ID 348503 "WMI monitor reports ""not found"" for LoadPercentage, CurrentConnection, GETRequestsPerSec, and POSTRequestsPerSec when probing IIS 7.5 on Windows 7."
ID 349062 In this release, we removed the SSL peer certification mode "auto" from all BIG-IP interfaces. The upgrade script contains logic to change "auto" to "ignore" in configuration files. However, we have not made a similar conversion for iRules because it is our policy not to alter iRules during upgrade. If you have iRules that use SSL peer certification mode "auto", you must change them to use "ignore". Otherwise, they will not work. There is no functional change incurred by doing so.
ID 349242 The load balancing method 'Ratio Least Connections (node)' does not perform correctly with 'Performance (Layer 4)' virtuals.
ID 349753 An empty sub-folder, even after saving, might not properly load during the tmsh command "load sys config partitions all". If you delete an empty folder and then load the sys config, please create the folder again.
ID 350249 Only 8 TMMs are shown with "tmstat cpu" on platforms which have more than 8 CPUs.
ID 351519 The configuration files used by pam and tamd are changing names between 10.2.x and this release. The files are currently being saved and then restored on upgrade, and in addition, the new files are being created when the associated mcp objects are created, which results in both the old and new versions of the files being present after upgrade.
ID 351650 On 11000 platforms with SSD drives, the LCD incorrectly shows the SSD drives in bay 3 and 4 as part of its RAID status. As the SSDs are not part of RAID, they display a status of "Unknown" or "Undefined" for the SSD sled bays 3 and 4. A more accurate status is "Not part of RAID."
ID 351874 When importing an ISO image into the Software Management screens in the Configuration utility, some browsers (for example, Microsoft Internet Explorer and Google Chrome), show /fakepath/ instead of the actual file path. This is expected behavior for HTML5-compatible browsers. You can work around this by adding the site to Trusted Sites. In addition, in Internet Explorer by setting the option Include local directory path when uploading files to a server in Internet Explorer :: Tools :: Internet Option :: Security :: Custom properties.
ID 351934 Booting with SSD installed, you will be able to see the SSD sled activity light blinking while the other spinning media sleds do not. This is normal.
ID 352560 SplitSSL is incompatible with persistence profiles.
ID 352840 When using partition default route domains, an attempt to load a previously saved configuration which had a different default route domain on a VIPRION may result in the secondary daemons restarting.
ID 352848 If an HTTP client sends a request with a body, and there is a pipelined request following it, and there is an iRule performing an HTTP::collect, then the HTTP::payload command may include data from the following request(s).
ID 352925 Updating a suspended iRule assigned via profile causes the TMM process to restart when trying to return to the suspended iRule. To work around this, assign the iRule to the virtual server instead of assigning it to the profile.
ID 352957 Established flows via virtual servers with iRules using the "node <addr>" command to set the nexthop to a different address than the gateway returned in route lookup, or transparent flows to a pool member, might fail (due to mis-routing of packets) after a route table change, even if the change does not affect any of the addresses used in the flow. New flows established after the route table change will work as expected. There is no workaround for the problem.
ID 353101 "SQL monitor hangs with <NULL> receive string. The workaround is to substitute the probable <NULL> receive strings by <substitute-value> strings using constructs such as: ifnull(<column-name>, <substitute-value>)."
ID 353154 Creating an instance of an ltcfg object from iControl might fail with a field validation error.
ID 353249 LTM Virtual Server Bytes in/out and Packets in/out values may be larger than expected on PVA platforms, when using FastL4 profile with PVA in 'Assisted' mode.
ID 353374 Some ASM settings that are owned by an iApps Application Service may be writable even if strict-updates are enabled for the application. This may allow inadvertent changes that may affect the functionality of the application. The changes may be overwritten the next time the application is updated.
ID 353621 You can get an error from tmsh when adding a device to the trust-domain that says the device cannot be found: "The requested device ( was not found." This error actually indicates the "name" parameter was not specified in the command.
ID 353623 In SNMP, the average MaxConns in sysGlobalStat always reports 0: F5-BIGIP-SYSTEM- MIB::sysStat{Client,Server}MaxConns{5s,1m,5m}.0
ID 353686 You cannot delete devices from the trust-domain using their IP addresses, even though that is how they are added. You need to use the device object name to delete devices from the trust-domain.
ID 353853 On the VIPRION platform, clusterd sometimes erroneously reports "Error adding cluster mgmt addr, HAL error 7". If the operation of a unit that has given this error is in question, check the IP addresses on each blade to verify that the floating cluster management address appears on only one interface of one blade.
ID 354149 "The tmsh tab complete feature incorrectly adds a space to the command line when finishing a folder name for property items inside a single command."
ID 354188 Connection mirroring for three or more devices will not be supported in this release. If there are three or more devices in the failover device group, mirroring will be silently disabled.
ID 354467 When you create an opaque VLAN group before creating the route domain to assign it to, opaque mode does not work. To work around this issue, you can add the VLAN group to the route domain and then set its mode to opaque, or if you are already in this state, you can restart tmm.
ID 354972 In some cases, tmsh will not properly recognize hostnames as an item reference for commands. Use IP addresses instead of hostnames when creating addresses with tmsh in this release.
ID 354993 "When loading a UCS, the following message may appear in the ltm log: debug bigd[3980]: External program not found in monitor /Common/external @528, file conv_to_service.cpp This message is benign and it can be ignored."
ID 355299 PVA acceleration can be configured on a platform without a physical Packet Velocity ASIC present. The setting has no actual effect and is harmless.
ID 355564 "The Error message ""The requested unknown (/Common/traffic-group-1 /Common/bigip1) was not found."" might appear in the log during startup. This message does not indicate a problem, and can be ignored in this situation."
ID 355616 ltm virtual-address objects are only shown in tmsh list output when specifically requested, as in "list ltm virtual-address", not in commands such as "list ltm".
ID 355622 tmsh "list" output most commonly shows only user-specified settings, unless the "all-properties" argument is given, in which case both default and user-configured settings are shown. In this release, some default settings are shown in the "list" output, even when "all-properties" was not requested.
ID 355973 Some none-CMI file object names can't start with alpha-numeric character.
ID 356069 If no route to the client exists and tmm uses autolasthop to direct return traffic to the client, FTP or RTSP data connections may fail.
ID 356073 Every part of the iApp template's presentation section is run every time, even the hidden parts. This means that anything that might crash (if something isn't provisioned) needs to be enclosed in a TCL block that is protected with a catch.
ID 356147 Version 11.0 added a new setting to the persistence profile for controlling the proxy map settings (proxy map class, mask, and mapped address attributes). However, TMUI support was not added for those. So, if you set them on a persistence profile using tmsh or iControl, the TMUI might unset them when viewing that profile.
ID 356319 You cannot reset the management port statistics (those that appear under Network: Interfaces: Statistics). The system does not report an error, but also does not reset statistics.
ID 356340 Additional virtual servers can be added to an AVR profile that is owned by an iApps Application Service even strict-updates are enabled for the application. This may allow inadvertent changes that may affect the functionality of the application. These changes may be overwritten the next time the application is updated.
ID 356611 You can invoke imish (the shell for configuring dynamic routing) from tmsh. When you subsequently press Ctrl + Z, sshd and imishd start consuming CPU until the imish shell times out. This occurs when tmsh is not the login shell. If the system is already in this state, run the fg command, and then exit imish.
ID 356705 "After completing the setup wizard in the Configuration utility, the user is redirected to the Welcome screen. The menu at left should also change from the restricted setup menu to the full menu, but occasionally it does not. In this case, the workaround is to log out/in or refresh the browser."
ID 356804 "There is a new way of handling files with external data group definitions: before assigning it to external class, a file must be imported using System :: File Management :: Data Group File List. For example, to import an iRule file and use it: Go to System :: File Management :: Data Group File List. Click Import. Specify the file you want to use, or use Browse to find it. Click Import. Go to Local Traffic :: iRules :: Data Group List. Click Create. In Name, type the name of the file. From the Type list, select (External File). Click Finished."
ID 356849 "On VIPRION 2400 platforms, /var/log/tmm shows the OCTEON revision as pass1 regardless of revision number. The log entry appears similar to the following: Cavium Octeon (0x1.10GHz 63xx rev pass1) 1024MB The pass1 designation is incorrect and should be the actual revision number."
ID 356862 Due to the migration from bigpipe to tmsh we no longer support bigpipe commands. If a bigpipe command is issued on a BIG-IP system running version 11.0.0, a core file can be produced. No interruption of service has been observed.
ID 356938 Special characters (such as the Yen sign) in data group names generate garbage characters. Do not use special characters of this type for data groups.
ID 357262 As a workaround, reqlog now closes the connection whenever it serves an http response on logging error. Ideally, it would keep the connection open when the protocol is HTTP 1.1 or higher.
ID 357283 If creating a new device group out of devices that have pre-existing config objects, the GUI will inaccurately report that the device group is "in sync".
ID 357391 "The first connection started prior to racoon being initialized fails. You must wait for racoon to initialize before first traffic is fired/processes. You can determine whether racoon is initialized by looking at /var/log/racoon.log. After configuring IPsec objects, /var/log/racoon.log reports that it has loaded the configuration and there is no error after it in a message similar to the following: 2011-04-27 11:03:35: INFO: Reloading configuration from ""/etc/racoon/racoon.conf"""
ID 357656 "When you use bigstart restart to restart a guest, the system logs the message: Apr 25 15:43:27 slot1/vcmp1 notice chmand[7975]: 012a0005:5: Chmand cleanup: Slot:Led:Color (1:3:0) not succeed: virtual void Hal::NullAnnunSvc::ledSet(Hal::LedFunction&, Hal::LedColor&, uint32_t&, uint32_t&, uint32_t&) This is a benign message and you can safely ignore it."
ID 357705 "Loading the default configuration may cause the system to go offline before resuming the active status."
ID 357822 User can use "delete cm trust-domain all" to create or fix trust-domain when loading a blank or inconsistent SCF.
ID 357852 If a device is part of an established trust-domain but is added into a second, separate trust-domain, the devices in the original trust-domain will still have references to the device. It is recommended that you delete the device from the trust-domain from a certificate authority before adding it to a different trust-domain.
ID 357874 "Creating an overlapping route can cause an unclear configuration exception message, such as: 1. [root@ltm-56:Active] config # tmsh create net route test_route_ipv6 network 2002::1/128 gw 2002::3 2. [root@ltm-56:Active] config # tmsh create net route default-inet6 { gw 2002::1 } 01070712:3: Caught configuration exception (0), Netlink reply from kernel has error: -113 (for static route create: ::/0 gw 2002::1 in vlan '') - net/validation/routing.cpp, line 332."
ID 358019 "NATs require a translation-address, but the error message does not indicate this. Instead, when you create the NAT, the message posted is: 01020059:3: IP Address :: is invalid, must not be all zeros. To work around this, make sure to include a translation-address."
ID 358063 "If you do a ""restart sys service all"" from tmsh shell, the next command you issue will result in the error message: ""The connection to mcpd has been lost, try again."""
ID 358099 If two devices have different provisioned modules, then the application with those modules configured in one device might not be able to sync to the other device. The two devices will be out of sync and cannot recover in this situation. For sync to occur correctly, both devices must have the same provisioning.
ID 358191 "If the user resets the trust and changes the host name of the device, the other devices in the trust domain still show the unchanged, former host name and show the device as still attached."
ID 358268 The TMUI currently allows the DNS64 Prefix to be up to 128 bits (a full IPv6 address), but actually, a valid prefix is only the first 96 bits. Thus, the last 32 bits (last 2 hex tuples) should be all zeros (e.g., 64:ff9b:0:0:0:0:0:0).
ID 358615 "When modifying failover unicast addresses via tmsh, user should be aware that all addresses must be specified even if the intention is to remove or add a single address to/from the list. For example, given a device with two existing unicast addresses, this command will replace both addresses with a single address: modify cm device unicast-address { { ip } }"
ID 358655 The No such file or directory error always shows up around kernel installation, but it does not negatively impact the installation itself.
ID 358685 "You may see messages similar to the following on booting the VIPRION 2400. These are innocuous and may be ignored: PCI: Cannot allocate resource region 2 of device 0000:0a:00.0 PCI: Cannot allocate resource region 2 of device 0000:0a:00.1 PCI: Cannot allocate resource region 2 of device 0000:0c:00.0 PCI: Cannot allocate resource region 2 of device 0000:0c:00.1"
ID 358698 The WebAccelerator module is not supported on 2 GB systems.
ID 358855 "Only the array command makes a drive with a failed SMART self-test visible to an end-user. We have a new feature in this release which automatically checks every new drive for SMART-type errors. If it finds any, the self-test fails and the drive can't be put into service. The results of this test are only seen when viewing the output of the ""array""."
ID 359075 Deprovisioning WOM (for example, changing the provisioning level from Dedicated to None) may require a reboot, even though the reboot prompt may not be visible.
ID 359217 If a vlan associated with route-domain 0 is in a partition with a non-zero default-route-domain and there is neither a self IP nor a virtual associated with the vlan, then the vlan may be moved to the default route-domain if the config is saved and loaded.
ID 359393 In order to be compliant with the FIPS-140 standard. Keys cannot be exported from a FIPS card in plain text, hence they can only be exported by encrypting them with the master key on the FIPS card. If the master key on the FIPS card has changed since the keys have been exported, it will not be possible to import the keys back into the card.
ID 359395 Invalid or empty SSL certificates, keys, or CRLs will not be rolled forward on upgrade to v11.0.0.
ID 359491 When a system's hostname is set by the user via the tmsh setting "modify sys global-settings hostname" only the local copy of the self device is set. Remote copies of the hostname are not updated accordingly. Thus, running the command "list cm device name-of-device hostname" would have the hostname "" on the local machine and "" on other machines in the trust domain.
ID 359774 "In v11.0.0, pools used in an HA group must be in /Common. If the user has a v10.x configuration that has pools in different partitions that are used in an HA group, an upgrade to v11.0.0 will fail."
ID 359776 The command tmsh modify does not properly parse multiple items in the same command for the cm module. To work around this, only modify one cm configuration item per command.
ID 359815 Dashboard can show random WAN optimization throughput spikes as approximately two times the actual bandwidth.
ID 359864 If the power cord to the power supply unit (PSU) is removed, the primary blade alarm LED lights up but there might not be warning messages on the LCD or console until two minutes after power cord removal. When the message appears, you can clear the alarm LED/LCD by pressing the Check button on the LCD module. If the LCD is not plugged in when the power cord is removed, the warning message appears on the LCD screen within two minutes of plugging the LCD module into the primary blade USB port, at which time you can clear the message by pressing the Check button on the LCD module. If you want to see the warning immediately, you can run the command system_check -D after removing the power cord. If the PSU is removed during the two-minute interval after the power cord is removed, the PSU-removal warning message might not display on the LCD module or the console screen, although the blade alarm LED turns red right away. To clear the blade alarm LED, you must run the command clearlcd_emergency.
ID 359873 LTM-initiated SSL renegotiation will not be attempted when secure renegotiation is configured as required and the peer is unpatched (does not support SSL secure renegotiation). This applies both to configuration-based (e.g., renegotiate-period), as well as iRules-based attempts to renegotiate.
ID 359894 When creating a CLI transaction for the BIG-IP system ("batch commands"), an attempt to create a sys folder and modify that new folder in the same batch will fail.
ID 359978 LTM Throughput statistics might not match when comparing the Dashboard against other interfaces. The Dashboard throughput statistic includes traffic observed on all physical interfaces, layers 2-7. Throughput statistics in other interfaces are based on traffic passing through tmm.
ID 360097 vCMP guest names (and most TMOS configuration object names) must start with a letter, "/" or "_" and thereafter, consist of letters and numbers. They also cannot conflict with keywords and parameters for the command.
ID 360122 The iControl method System.Statistics.reset_all_statistics() does not reset iStats.
ID 360241 The strict-negotiation option, which was added as a default option on the SSL profile, might cause negotiation failure after upgrading. This is relevant when upgrading configurations containing SSL profiles from versions prior to 11.0.0. This means that when a WOM device on one side is upgraded, the SSL negotiation with the other WOM fails. To work around this, you can do either of the following: -- Disable strict-negotiation on the upgraded SSL profile. -- Upgrade the other WOM to this release.
ID 360263 In this release, the VIPRION 2400 reports a CPU Count of 8 instead of the expected 4 on the Device Configuration screen in the browser-based Configuration utility. This occurs because the implementation of hyper-threading causes the system to report double the actual number of cores. There is no workaround for this issue.
ID 360290 If a guest's VM fails to deploy with the error message "Invalid vCMP configuration- no interfaces allocated.", then there could be a problem with a blade's interfaces. Run "tmsh show net interface" and, if any blade has interfaces in the "miss" state that should be in the "up" or "down" state, it is recommended to reboot that blade to recover from the error state.
ID 360477 Converting a single-slot guest in the deployed state to all-slot while the single-slot guest is performing a virtual disk migration will result in a VM booting up on the slot from which the virtual disk is being copied. This VM will use the virtual disk being copied, which can cause file system corruption on the newly copied virtual disk.
ID 360613 Before initiating trust after doing a restart (or bigstart), you need to make sure that devmgmtd is up. This takes a few seconds after reboot or bigstart restart.
ID 360675 Creating a configuration object with a FIPS 140 key will always create a key in the FIPS 140 device even when the configuration objects are not saved. Configuration objects that are not saved will require the user to delete FIPS 140 keys manually from the device.
ID 361028 In rare instances the bigpipe interface might show the management port (MGMT) as UP when there is no Ethernet physically connected to the port. The issue can usually be remedied with a blade reboot.
ID 361035 Trust-domain members overwritten when discovering existing pair. There is no workaround for this issue.
ID 361036 When the AOM powers down the Host for cause (e.g., over temp) it abruptly stops the Host, bypassing a normal graceful power-down sequence. Because of this, some log messages being sent from the AOM to the Host might be lost.
ID 361094 im command gives error if im package is in root directory (formerly CR 100844).
ID 361124 The App Editor role will be able to run any iApps template, but most of the iApps templates will not work for them because of permissions issues.
ID 361181 "A ""fipsutil reset"" resets the FIPS card and deletes all keys in the card but it does not delete the configuration objects representing those keys. It also does not modify SSL profiles using those keys. This results in the system failing to load the configuration on reboot. An error like this will be generated: Jun 6 06:02:30 RackC6-6900-1 notice mcpd[5816]: 01390002:5: The size of the configuration DB has been extended by 2097152 bytes, now using a total of 10485760 bytes Jun 6 06:02:31 RackC6-6900-1 err mcpd[5816]: 010713e4:3: FIPS subsystem reported error while attempting file object operation: FipsMgr::get_handle_from_modulus error unable to obtain handle. Modulus(e1:fb:55...ef:89:b3), FIPS:ERR_HSM_NOT_INITIALIZED. Jun 6 06:02:31 RackC6-6900-1 err mcpd[5816]: 010713e4:3: FIPS subsystem reported error while attempting file object operation: fips_insert_masked_object error on import, ERR_HSM_NOT_INITIALIZED. Jun 6 06:02:31 RackC6-6900-1 err mcpd[5816]: 01070712:3: Caught configuration exception (0), unable to import FIPS 140 key (/Common/zzFIPSTest) from key file.) - sys/validation/FileObject.cpp, line 4714. Jun 6 06:02:32 RackC6-6900-1 err tmsh[6948]: 01420006:3: Loading configuration process failed. To avoid this situation, delete the FIPS keys and remove the usage from profiles before resetting the FIPS device. If the system gets into the failure condition as shown previously, do the following: 1. Edit the bigip.conf file where the FIPS key is referenced. Delete all occurrences of the key. 2. Delete the key from /config/ssl/ssl.cavfips 3. Find and delete the key from filestore/files_d/<partition-name>/certificate_key_d/ 4. Run ""tmsh load sys config partitions all"" to make sure the config loads. After this point, the config should load without issue after a reboot."
ID 361315 if you go to the System > Preferences screen and simply click the Update button without editing any values, the system incorrectly posts a Changes pending notice (that is, recommendation for synchronization). Many values on this screen are not even synchronized across BIG-IP devices.
ID 361318 If you want to turn on connection mirroring in iApps, turn off the strict update. Enable connection mirroring on all virtual servers that belong to the iApp. Then turn the strict update back on.
ID 361330 Enabling longest match on the topology list will re-order the list. This will be problematic for larger lists and if the customer is making use of a unique ordering for their inbound LDNSs.
ID 361470 If a virtual server's destination address is entered into tmsh with invalid IPv4 or IPv6 numbering or a hostname, the error message "The requested virtual address (</PATH/ADDRESS>) was not found." will be displayed.
ID 361758 tmsh will fail to complete the configuration item name for profiles eam, mblb, html, ntlm, pluginclass, rba, sso, and smtp when the user presses <tab>.
ID 361976 "If an .iso file is removed from the file system, either by a user in bash or another unexpected problem, guests relying on that .iso will display confusing error messages when being re-deployed. The workaround/fix is to locate the .iso being used for the guest(s) and place it back in /shared/images."
ID 362142 Loading large geoip databases can cause tmm to miss its heartbeat timeout - SOD then sig aborts tmm.
ID 362225 Disabling connection queuing via "tmsh edit" while connections are queued will cause the queued connections to become stuck. The workaround is to use tmsh modify command instead of edit.
ID 362267 "If a user configures network failover on a VIPRION that uses a blade's management address as the unicast address, the other blades will not be able to use this address and will issue an error message. This is correct operation."
ID 362299 You cannot enable/disable virtual servers owned by an application service, with strict updates enabled from the virtual server properties page. A "strict updates" error results. The workaround is to enable/disable the virtual server from virtual server list page.
ID 362405 If a vdisk migration occurs, the original disk copy is left unchanged on the initial blade. The copy will not be synchronized with the migrated disk on the new blade. After migration is successful, the older disk image can be safely deleted.
ID 362406 "Tmsh show sys failover cable" does not show the peer cable status anymore due to changes in the configsync process.
ID 362413 If a monitor send or receive string contains a backslash character, this backslash will be escaped (prepended with another backslash) when the monitor is listed in tmsh. This causes no harm; the monitor still functions properly.
ID 362802 If the server closed the connection after sending 401 response, websso in APM module may not work for portal access application.
ID 362874 "After upgrading, the following message was posted on the Configuration utility browser window for several hours. ""Upgrading Device Trust Device trust is still being upgraded. Please do not make modifications to Device Management or Traffic Groups pages while this message is displayed."" This occurs when a device that is configured to be in a redundant pair is upgraded to version 11.0, but its peer device cannot be contacted. The banner indicates that the device is waiting for its peer to be contacted. If the peer device is no longer in use, the workaround should be used to remove the banner message."
ID 362984 The console displays a message indicating the DHCP can be adjusted on a VIPRION system. Performing this command will have no effect on the configuration.
ID 362985 Displaying the configured syslog server with tmsh might require prepending the /Common/ path.
ID 363214 "For any virtual server that is configured with proxy-ssl, if during the handshake, the compression method is negotiated to anything other than NULL (no compression), for example, if client hello offers NULL and DEFLATE and the server accepts DEFLATE, then the SSL handshake does not succeed. To prevent this, the client or server must be configured not to offer/select compression, where possible."
ID 363216 "A virtual server might say 'vlans-disabled', but does not include a list of which ones are disabled if that list is empty. For example, this means that the virtual is disabled for no VLAN entries, the default setting: ltm virtual sample_vs { destination any:any profiles { fastL4 { } } vlans-disabled } This is harmless. Use the command ""list ltm virtual all-properties"" to see the (empty) list of VLAN entries."
ID 363284 The cipher list 'DEFAULT:!NATIVE' is different on v10.2.2 (valid) and v11.0.0 (invalid, empty). This can cause configurations to fail loading on v11.0.0 during the upgrade. This occurs because ciphers "ALL" in the Client SSL profile only includes "NATIVE" ciphers. That means that "COMPAT" must be specified to include "COMPAT" ciphers (e.g., EXP, EDH). As all SSLv2 ciphers are COMPAT ciphers, this also means that "ALL:SSLv2" no longer includes SSLv2 ciphers. Note that this change impacts upgrade. So if your configuration uses COMPAT ciphers, it requires a configuration change (to specifically include COMPAT ciphers) for upgrade to complete successfully.
ID 363361 The matchclass command is deprecated in favor of class match command. Do not specify a datagroup name as if it were a global variable.
ID 363405 When canceling a guest's install/migrate process(es) by setting its state to Configured, the system deletes the partial virtual disk image from the file system but does not delete the virtual-disk object in MCP. If you run the command 'tmsh list sys vcmp virtual-disk' and see the remaining object, it is highly recommended that you manually delete it. To do so, run the command 'tmsh delete sys vcmp virtual_disk <name>'. Failure to do so can cause unexpected validation errors in the future when configuring vCMP guests.
ID 363500 The system logs of a BIG-IP vCMP guest might show DriveReady Errors or an AbortedCommand in relation to /dev/hdc. These kernel warnings are innocuous and may be ignored.
ID 363541 "If a user creates an ""and"" rule for the default node monitor that includes the monitor ""/Common/none"" the state of the node will not be reported correctly."
ID 363756 "Simultaneous blade-to-blade migrations of guests might occur. In rare instances, it's possible that multiple migration tasks will take longer than the allocated interval and as such migrating guests might encounter a timeout. If this happens three times, the guest will be placed in the ""failed"" state. To recover a guest from this condition, wait until all guest migration tasks complete successfully or fail after three timed-out attempts. Then on any blade with a guest in the ""failed"" state, execute the ""vretry"" command. This will cause any guests in the failed state on that blade to retry the failed action. Executing ""vretry"" one blade at a time and waiting until all migration tasks on that blade are complete will avoid these failsafe timeouts. If a guest's retry attempts also fail, re-provisioning the guest might resolve the issue. To do this, change the guest's state to ""configured"" and then subsequently back to ""provisioned"" or ""deployed"", as preferred. Note that this might cause the guest to be allocated to a different blade."
ID 363912 In rare occasions, when there are no monitors assigned as the default node monitor, an entry "none" may appear in the Active select box on the "Default Monitor" page in the Configuration Utility. This still represents the fact that no monitors are selected as the default node monitor and the BIG-IP will operate as such.
ID 364031 "When you are in a folder other than /Common, attempting to add or delete a remote-server for syslog gives the error: 01020036:3: The requested configuration item ( /Common/foo/syslog syslog) was not found. Navigate to the /Common folder and try the operation again."
ID 364407 "Even after vCMP is deprovisioned, VLAN deletion/modification is incurring a verification check that prevents VLAN from being deleted/modified. To work around this, reprovision vCMP, delete/modify the guest, delete/modify the VLANs, and then deprovision vCMP (reboot required)."
ID 364522 A user with the app_editor role can create an app service; however, because app_editor users cannot create objects (they can only update and enable/disable them), app_editor users actually cannot create an app service.
ID 364588 If you run the show command from /Common partition to display the details of a pool in another partition, the monitor instance line is missing. To work around this, navigate to the partition first. Then the show command presents the expected results.
ID 364717 "When using the node-port option with delete command for persistence persist-records, entries with the specified node-port should be deleted. Instead, the system deletes all the persist table entries irrespective of the port specified. Also, the show command with nonexistent port displays all the entries irrespective of the port specified."
ID 364776 The system does not prevent you from including pools from partitions other than Common in an HA-group. However, this configuration is not supported, and those pools will be removed from the HA-group when you modify pool settings.
ID 364825 Keys that are stored on a FIPS card are incorrectly not included during device group synchronization. The encrypted key (.exp) files must be manually copied to other devices and installed with tmsh: tmsh install sys crypto key <desired-keyname> from-local-file <path-and-keyname> security-type fips
ID 364831 "When snmpd is restarted, you might get this warning message in the log file: /config/snmp/subagents.conf: line 9: Warning: Unknown token: agentxPingInterval."
ID 364939 "When a BIG-IP system has been configured as part of a trust domain for the purpose of config sync, and the configuration has been saved to the configuration files (tmsh save sys config partitions all), the following sequence of commands will incorrectly remove the BIG-IP system from the trust domain and config sync will not work: tmsh load sys config default (set the config back to factory defaults) tmsh load sys config partitions all (load the configuration from config files in /config/...)"
ID 364978 "If an active/standby system is misconfigured with unit 2 failover objects, two traffic groups are automatically created: traffic-group-1 and traffic-group-2. For traffic-group-2, the default device points toward the unit 2 box. Instead, it should point to the unit 1 box, because it is an active/standby pair. To work around this, modify the default device to point to the unit 1 box, using a command similar to the following: tmsh modify /cm traffic-group traffic-group-2 default-device <unit 1 device name>"
ID 364981 On the System > Preferences screen, changing "Idle time before automatic logout" to any non-default value causes the CPU usage to increase.
ID 365006 Installing a 10.x UCS on a "clean" 11.0 will cause daemons on secondary blades to restart.
ID 365219 "Trust upgrade fails when upgrading from version 10.x to version 11.x. The upgrade fails without apparent error, but there will be one of the two following error messages in /var/log/ltm log: -- Trust configuration update for HA Pair has failed: [STACK TRACE: {java.lang.Exception: Config sync password is invalid.}{ at}. -- devmgmtd[7983]: 015a0000:3: Trust Config Update: [TrustConfigUpdateForHAPair.cpp:521 ] Skipping already-completed trust." Upgrading high availability version 10.x configurations that use the factory default admin password. Trust upgrade for version 10.x high availability configuration fails. Workaround: Change the default admin password in the 10.x configuration before upgrading to 11.0.0. This is intended functionality. The default admin password should be changed before deployment.
ID 365224 Immediately after configuring a sync-failover device group, all devices might come up with In-Sync status in which case config-sync command will not push the configuration to other devices.
ID 365342 The forwarding IP virtual server stops working after a request logging profile is added.
ID 365375 DNS response packet is dropped when "DNS::edns0" command is used with nsid option and there is no edns0 resource record in the packet.
ID 365545 Due to known problems in the current Cavium firmware, CN16XX cards will occasionally cease to function after performing a large number of key management operations (such as creation, deletion, conversion). To resolve this issue, reboot the BIG-IP system, and FIPS functionality should be restored.
ID 365555 The DES ciphers have been deprecated for TLS V1.2 but TMM is including them. These ciphers are supported on earlier versions of SSL/TLS, such as SSLv3 and TLS v1.0, which are widely used. TLS v1.2 is trying to depreciate and move to higher standards. F5 recommends that you do not use these ciphers.
ID 365665 "If a clustered BIG-IP runs in vCMP mode and a slot has been disabled, the vCMP guests on that slot will repeatedly log messages in their ltm log file. The messages will resemble: ""Blade 1: blade 1 powered DOWN."" (The blade number may differ) The messages will repeat until the blade has been enabled on the vCMP Host."
ID 365756 On error, partition folder has changed at the command line. Change it back to /Common and attempt to reload SCF after the fix.
ID 365757 "Mixed mode is presented as an option for extra disks. When applied, this configuration option will present an error message similar to ""01071372:3: Cannot change the mode for logical disk (HD2) from (NONE) to (MIXED). Disks cannot be changed to MIXED or CONTROL modes."". For this release of BIG-IP software, only None and Datastor are functional modes for extra disks."
ID 365767 The verify option during a load .scf file operation from tmsh on the VIPRION system will cause mcpd to restart.
ID 365836 "When using tmsh to switch to a vCMP provisioned system, a transaction should be used. The commands to do this are: # tmsh > create cli transaction > modify sys provision ltm level none # All modules must be set to none. Add any other commands here to do so following the previous ltm example. > modify sys provision vcmp level dedicated > submit cli transaction Secondary blades will likely reboot automatically due to this operation. There are conditions where the primary will reboot automatically as well. If the primary does not reboot and the status is REBOOT_REQUIRED, you should wait two full minutes before rebooting the primary blade. This is to ensure that provisioning completes, the secondaries have rebooted, vcmpd starts and the system enters a quiescent state. This only needs to be done when changing provisioning."
ID 365979 After creating a new folder from tmsh the "tmsh save sys config partitions all" command should be run.
ID 366060 "FTP mirroring occasionally fails when connections come from tmm0. When it does fail the idle timer on the standby is not updated and the connection is reaped in the 30-50 second range."
ID 366172 A pre-v11.x configuration that was created with the bigpipe cli ip addr option set to name may cause configuration load failure on upgrade due to resolved names saved to the bigp.conf file rather than IP addresses. The workaround is to change the cli setting to 'cli ip addr number', save the config on the pre-v11.x unit, and then run the upgrade.
ID 367066 With many VLANs added to a vlangroup or with the FDB timeout set lower than the ARP timeout, proxy ARP across the vlangroup may fail.
ID 367072 Running the command 'tmsh show sys hardware' on appliance-based system shows a Registration Key field with a -- value, even on licensed systems. This field is designed only for chassis-based systems, so you can ignore the value
ID 367198 Running 'tmsh show sys hardware' on appliances shows a blank Registration Key field. This is by design; this field is intended for VIPRION chassis only.
ID 367663 When upgrading from 9.4.x and your config has sshd banner text, an extra bracket (}) will be added to the config file.
ID 368389 IPsec cannot be used with jumbo Ethernet frames.
ID 368512 Some actions [in the GUI] may result in a "Changes Pending" sync status, even though no configuration was modified. Manually syncing the devicegroup will fix the status.
ID 368813 RFC5077 TLS Session Ticket is not supported in ProxySSL profile. Endpoints are able to negotiate this extension but if a renegotiation is initiated, an SSL Alert is generated and the connection is closed. To workaround this, disable TLS Session Ticket in the server configuration to ensure the extension is not negotiated.
ID 369607 You can set ignore signature for a specified rule through the GUI and iControl, but there is no similar tmsh command to set a specified rule to ignore a signature.
ID 370225 After a pool member is disabled from a DHCP Relay virtual server, connection flow data for the disabled pool member will persist until it times out.
ID 370272 "A DHCP Relay Virtual Server can point at a pool with Priority Group Activation configured. The Priority Group Activation configuration will be ignored, wherein relayed requests are sent to all Active pool members."
ID 370941 Only DNS names are accepted for subject alternative name, not EMAIL, URI, IP, or Other.
ID 370991 The Logs Local Traffic option under the system menu is not visible on systems provisioned WAM dedicated as of version 11. Version 10 displayed this menu option inadvertently.
ID 371242 "On a vCMP guest running WOMLite, the upper left info box that contains Serial#, Model, Version, etc.. Is missing the management IP. This is cosmetic and not functional."
ID 372209 When the certificate used to verify a signed iRule expires, the iRule verification status will still remain "Verified" as long as the certificate exists on the device. To avoid the misleading status, the signature for rules signed with an expired certificate should be modified to have the 'ignore verification' property set to true, or edited to remove the signature (edit the rule and remove the 'definition-signature' line).
ID 372295 LACP can enter a state in which ports in a trunk that have been moved or re-ordered do not fully function as a reference port when there is another, actual, functioning port in trunk. There is no workaround for this issue.
ID 372858 There is no tmsh command to change the log level of the ike-daemon.
ID 372979 When using the config utility to configure a static IP address, it works correctly. But when using the config utility to select an automatic or DHCP address, the operation does not complete, and returns to the prompt without error. The workaround is to configure a static IP address.
ID 373467 MD5 certificate will not work with TLS 1.2. Client will not be able to authenticate with certificates that is signed with rsa-md5.
ID 373822 WAMD may crash during provisioning in certain module combination environment.
ID 374109 The radvd config is not migrated to tmsh syntax during a UCS restore.
ID 374455 SNMP for the dynamic routing subsystem is only supported in the default route domain. For dynamic routing instances in other route domains, no SNMP information is available.
ID 375207 "On rare occasions, tmsh will write an innocuous error message to /var/log/ltm based on a query to mcpd. The error appears as: 01070734:3: Configuration error: Invalid wildcard query, invalid or missing class ID"
ID 375605 Management IP addresses which are not saved in the configuration can remain on the interface after a reboot.
ID 375887 Using the cluster member 'disable' command with a trunk that spans blades can cause a brief period where received broadcast and multicast packets will egress out the enabled trunk members of the cluster. To an external device running spanning tree protocol or variant, this can look like a loop.
ID 376166 If you set the media capability of the 10 GbE port to 1 GbE, the system fails to turn the Link LED to amber. There is no workaround for this issue.
ID 376421 While blades boot up, the system posts the following benign message: "i8042.c: No controller found." This is a cosmetic issue and can be ignored.
ID 377231 VIPRION B4300 blades only support 9600 and 19200 baud, even though other baud rates are accepted.
ID 378055 The serial console on the B2100 blade in a VIPRION C2400 chassis cannot be set to 38400 using the tmsh command "tmsh mod sys console baud-rate 38400," but can be set using the AOM Command Menu. After setting to 38400 via the AOM Command Menu you can use the tmsh command to see that the baud rate has been set to 38400.
ID 378305 Because the first phase of the BIOS operates at a fixed baud rate of 19200, if you change the baud rate to any other speed, you do not see the BIOS splash screen, nor are you able to access BIOS setup while rebooting the B4200 blade. To see the splash screen or access BIOS setup, change the baud rate to 19200.
ID 378394 The command "tmsh list ltm" displays used pool twice, once with its members, once with pool properties. To work around this, use the command "tmsh list ltm pool" instead.
ID 379213 If a guest provision or deployment stalls on 'waiting for other disk activity to finish', wait for all disk activity to finish. Once complete, bring the guest back to a configured state before attempting to provision or deploy again.
ID 379536 If you register a new category in the iRule for the FLOW_CLASSIFIED event using the command CLASSIFICATION::register, you must restart TMM service in order classify that event as the newly registered event
ID 379656 The VIPRION B4400 chassis is cooled via side to side air flow. If multiple chassis are aligned in adjacent racks, the heated output air from one chassis becomes the input air to the next chassis and this can cause blade overheating.
ID 379738 "If a BIG-IP system has both an 11.x install and a 10.x install, in some cases falling back to 10.x will result in these error messages in /var/log/ltm Error 'unknown DS name 'rchits'' during rrd_update for rrd file '/var/rrd/ramcache If so, do the following bigstart stop statsd and either rm -f /var/rrd/ramcache* or cp /var/rrd/ramcache* to some permanent location. See note: bigstart start statsd statsd will then regenerated the rrd file. Note: this will result in the loss of RAMCACHE historical statistics. If that is unacceptable create a directory on /shared to hold the files example: While still running the 11.x partition bigstart stop statsd mkdir -p /shared/rrd11/ramcache mv /var/rrd/ramcache* /shared/rrd11/ramcache Then reboot to 10.x If you wish to restore these when switching back to 11.x (once rebooted to 11.x) bigstart stop statsd cp /shared/rrd11/ramcache/* /var/rrd/ bigstart start statsd"
ID 380047 Listing certain objects in subfolders of the current folder (e.g. `list ltm profile ntlm my_subfolder/my_ntlm_profile`) may not show any output.
ID 380415 TMM CPU utilization statistics reported by sflow or by running "tmsh show sys tmm-info" are less than actual TMM CPU utilization.
ID 380417 "When using direction = both for a traffic selector, the underlying implementation creates two unidirectional traffic selectors: an inbound and an outbound traffic selector. If the traffic selector with direction = both has source = b.b.b.b/m and destination = a.a.a.a/m: the inbound traffic selector is created with source = a.a.a.a/m and destination = b.b.b.b/m and the outbound traffic selector is created with source = b.b.b.b/m and destination a.a.a.a/m."
ID 381119 When route are redistributed into BGP, redistribute statements after the first may not be loaded into the running configuration.
ID 381433 Using sideband connections within iRules to recurse without limit will eventually cause a core due to OOM. If using sideband connections within an iRule to connect back to the virtual firing the event, ensure that the sideband request does not cause the same event and same condition.
ID 381710 The test-monitor and test-pool-monitor commands require the monitor or pool argument to include its partition; e.g. /Common/pool1. Tab completion from inside a partition will cause the partition name to be omitted.
ID 382577 The imish "terminal monitor" command has no effect in TMOS. The workaround is to configure log file (under /var/log) and use the tail command to monitor it in real-time. The workaround unfortunately does not work for users without access to bash).
ID 382613 Speed LED stays with solid amber when at 10Mb.
ID 382621 Validation code in the UI is preventing the request-log profile from being associated with a virtual server when the protocol selected is UDP. The request-log profile settings should be set compatible with UDP. The work around is to set the UDP setting in tmsh.
ID 382725 "The TCP progressive stack used in WOM configurations performs autotuning of the send buffer and receive window in order to simplify deployments. In high latency environments, the TCP stack incorrectly increases the receive window which can result in inappropriately large send buffer on the peer. This can cause overdriving of the network resulting in large packet drops in the internal switch which causes very poor performance. This problem is more severe when the WOM deployment is a bridge mode rather than routed mode deployment. The problem can be more severe on some platforms. The issue can be worked around by disabling the autotuning and using the WOM quickstart to set the buffers or indeed manually configuring the buffers for the actual deployment scenario. The command to disable autotuning is tmsh modify sys db tm.tcpprogressive.autobuffertuning value disable"
ID 382804 There is a difference in time zone adjustment between VPE and tmsh. When a date and time is entered in tmsh, it is interpreted as local time. The input time is adjusted and stored as GMT time. However when a date and time is entered in the VPE, there is no time zone adjustment. For this reason the timestamp entered through tmsh will be different than the one entered through the VPE for the same date and time. Due to this difference pre-logon inspection will fail when using tmsh to configure the agent for endpoint Linux check file.
ID 383128 While upgrading or booting between versions on the VIPRIONB2400, 4200 and 4300 Blade Series, it should be expected that firmware upgrades between versions may delay the cluster from becoming active by up to fifteen minutes.
ID 383405 If a Copper SFP interface is administratively disabled by default on BIGIP reboot, the Copper SFP interface won't be able to pass traffic even if the interface is set to enabled later. Workaround: administratively enable the interface, and temporarily insert a 1G fiber SFP into the socket and then re-insert the Copper SFP.
ID 383531 "Changing the management address for a vCMP guest BIGIP that is part of an HA pair may cause both members of the HA group to become active. To change the management address of a vCMP guest the device certificates must be updated within the guest manually. Use the following procedure: The cm device unicast-address ip/effective-ip fields must be corrected on each device to be used in the device group. ""tmsh modify cm device <device> unicast-address { { <dataplane address> } { <new management address> } }"" After this, remove the remote peer from the peer trust list on each machine and re-add it. The config-sync group should resync and be back in order."
ID 383590 When upgrading multiple machines that are members of the same trust domain, it is possible during mid-upgrade there will be inconsistent sync status messages across the trust domain. Once the upgrades are complete, and all machines are in running state on the same version, the sync status should return to a consistent status across the domain.
ID 383649 After reprovisioning a chassis from VCMP-dedicated to non-VCMP, a manual system reboot is required. Not performing this manual reboot may result in reduced SSL performance as well as log messages indicating "using sw-based crypto/auth".
ID 383737 Ha-group and other ha methods are incompatible. The ha-group must either be enabled on all devices in the failover device group or it must be disabled on all devices in the failover device group. It is important to disable ha-groups before adding additional devices to the device trust.
ID 383763 if the error condition is encountered, remove unused virtual disk images from /shared/vmdisks. The system will recognize when enough space is available and begin installation automatically.
ID 383767 Unable to use newly generated key until pkcs11d and tmm are restarted. A workaround includes the following:
  • On the Standby BIG-IP-1.
    1. Run generatekey utility on Standby machine OR run rfs-sync –update to copy new keys from the RFS.
    2. If the generatekey command was run, run the command rfs-sync –commit
    3. Run 'tmsh restart sys service pkcs11d'
    4. Run 'tmsh restart sys service tmm'
    5. Install the Certificate(s) and Key(s) to Filestore using TMSH
    6. Create the clientssl profile to use new key
  • On the Active BIG-IP-2.
    1. Run 'tmsh run sys failover standby'
    2. Ensure new key is working appropriately on Bigip-1
    3. Run 'tmsh restart sys service pkcs11d
    4. Run 'tmsh restart sys service tmm'
    5. Run rfs-sync-update
    6. Run ‘tmsh run cm config-sync from-group <choose appropriate device-group>’
ID 384103 Intra-chassis connection mirroring may drop connections on trunks with LACP disabled.
ID 384463 If the UI reports "synchronize to group /Common/device_trust_group", this may be a result of devices in the trust domain whose time is more than 5 minutes out of sync.
ID 384569 "If an object is in a partition with the default route domain set, and that object refers to an object with an IP address in /Common, a config rolled forward from a previous releases may not load. - When using the default route domain for a partition, all objects with addresses should be in that partition."
ID 384717 While viewing "watch-trafficgroup-device", if the devices in the device group change, the "watch-trafficgroup-device" can sometimes become non-responsive. Killing the tool and restarting after the device group membership stops changing will keep the "watch-trafficgroup-device" running stable.
ID 384752 When running VCMP on a chassis, blades should only be disabled when no guests are deployed on that blade. In addition, guests should only be deployed onto a chassis when all blades are enabled. In general, when using VCMP on a chassis all blades that are powered on need to be enabled.
ID 384759 For best performance, F5 recommends using the SDD v2 symmetric deduplication codec for CIFS Layer 7 optimization.
ID 384797 RARP packets may be forwarded across vlangroup children even if the destination is in the proxy exclusion list, or if the unit is standby and bridging is disabled on standby in the configuration.
ID 385340 The DHCP Relay LTM Profile will not function correctly when deployed on VIPRION BIG-IP systems.
ID 385457 IPsec is not operational with IPv6.
ID 385493 "When running tcpdump on a TMM owned hidden interface, one warning message about halGEtChassisAllSlots will be logged in /var/log/ltm, similar to this one: May 6 05:36:32 c106-b23-2011 warning tcpdump[27763]: 012a0004:4: halGetChassisAllSlots: error 1 It is cosmetic and harmless message, and tcpdump functions as expected. The warning was due to a software bug in libbigpacket that fails to check if the platform is an appliance before calling the HAL get all slots API. It will be fixed in the next release."
ID 385576 As a side effect of the fix issued for Bug367620, any fallback persist profile with mode source_addr or dest_addr, and hash algo carp is mistakenly include port number in its hash calculation. Applies to 11.1.0-hf2 release only.
ID 385656 "Upon provisioning, deployment or disabling of a guest, administrative users logged into the vCMP host gui may be logged out prematurely. Logs detailing an invalid password change will be present and should be considered innocuous. err mcpd[8153]: 01070366:3: Bad password (admin): BAD PASSWORD: it is too short err mcpd[8153] 01070366:3: Bad password (root): BAD PASSWORD: it is based on a dictionary word"
ID 386419 11.2.0 has an updated version date. This means all users installing 11.2.0 on vCMP guests will first need to renew their license on the hypervisor. This will ensure uninterrupted service on the guest as it starts up for the first time.
ID 386991 All DHCPv6 pool members must have a forwarding route in the tmm routing table. Any route from the default to a specific node route for the DHCPv6 pool member will suffice and prevent a crash when a DHCPv6 Request is forwarded.
ID 387070 Using remote authentication, a remotely authenticated user can use ssh to login, but console login is no longer being allowed.
ID 387106 Ramcache statistics will be associated with only one vip per profile. The statistics for all of the vips which use this profile will be reflected in the ramcache statistics for that vip.
ID 387361 If a device is rebooted and it comes up with a sync status of 'not all devices synced' and the other devices report a sync status of 'in sync', then the force sync cmd must to be run to correct this situation. To sync the group, run the following command on the device whose config you want to sync: tmsh modify cm device-group failover-device-group devices modify
ID 388022 If you set the Host management IP address via the front panel LCD keypad, it will sometimes not persist after the system reboots. This will be addressed in a future release.
ID 388098 dmesg may display a message similar to the following:

localhost warning kernel: hda: host side 80-wire cable detection failed, limiting max speed to UDMA33

This is expected and does not indicate any problem with the hardware or software.

ID 401367 Version 11.x added validation around the use of CACHE:: commands on virtual servers with RAM cache enabled. The result is that upgrading from version 10.x to 11.x fails under certain configuration conditions, for example, if the configuration contains a CACHE_RESPONSE event in an iRule, and there is not an associated Web Acceleration profile applied to that virtual server. To work around the upgrade failure, locate and remove the applicable iRules and virtual servers in the configuration, and try loading the configuration again.

Contacting F5 Networks

Phone: (206) 272-6888
Fax: (206) 272-6802

For additional information, please visit

Additional resources

You can find additional support resources and technical documentation through a variety of sources.

F5 Networks Technical Support

Free self-service tools give you 24x7 access to a wealth of knowledge and technical support. Whether it is providing quick answers to questions, training your staff, or handling entire implementations from design to deployment, F5 services teams are ready to ensure that you get the most from your F5 technology.


AskF5 is your storehouse for thousands of solutions to help you manage your F5 products more effectively. Whether you want to search the knowledge base periodically to research a solution, or you need the most recent news about your F5 products, AskF5 is your source.

F5 DevCentral

The F5 DevCentral community helps you get more from F5 products and technologies. You can connect with user groups, learn about the latest F5 tools, and discuss F5 products and technology.

AskF5 TechNews

Weekly HTML TechNews
The weekly TechNews HTML email includes timely information about known issues, product releases, hotfix releases, updated and new solutions, and new feature notices. To subscribe, click TechNews Subscription, complete the required fields, and click the Subscribe button. You will receive a confirmation. Unsubscribe at any time by clicking the Unsubscribe link at the bottom of the TechNews email.
Periodic plain text TechNews
F5 Networks sends a timely TechNews email any time a product or hotfix is released. (This information is always included in the next weekly HTML TechNews email.) To subscribe, send a blank email to from the email address you are using to subscribe. Unsubscribe by sending a blank email to

Legal notices

Was this resource helpful in solving your issue?

NOTE: Please do not provide personal information.

Additional Comments (optional)