Attackers can target the BIG-IP^® system in a number of ways. The BIG-IP system addresses several possible DoS, DDoS, SIP, and DNS attack routes. These DoS attack prevention methods are available when theBIG-IP^® Advanced Firewall Manager™ is licensed and provisioned.

DoS and DDoS attacks

Denial-of-service (DoS) and distributed denial-of-service (DDoS) attacks attempt to render a machine or network resource unavailable to users. DoS attacks require the efforts of one or more people to disrupt the services of a host connected to the Internet.

With Advanced Firewall Manager, you can configure the system to automatically track traffic and CPU usage patterns over time, and adapt automatically to possible DoS attacks across a range of DoS vectors. You can configure DoS detection for the whole system, and in a profile for a virtual server.

Automatic threshold configuration is available for a range of non-error packet types on the AFM system. Use automatic thresholds to adapt responses to DoS attack vectors based on the traffic history on the system.

With AFM, you can also configure manual responses to DoS vectors. For non-error packets, you can configure absolute packet-per-second limits for attack detection (reporting and logging), percentage increase thresholds for detection, and absolute rate limits on a wide variety of packets that attackers can leverage as attack vectors. In addition, you can configure Bad Actor detection, to identify IP addresses that engage in such attacks, on a per-vector basis, and you can automatically blacklist Bad Actor IP addresses, with specific thresholds and time limits. Configure responses to system-level DoS attack vectors in the DoS Device Configuration.

DNS and SIP flood (or DoS) attacks

Denial-of-service (DoS) or flood attacks attempt to overwhelm a system by sending thousands of requests that are either malformed or simply attempt to overwhelm a system using a particular DNS query type or protocol extension, or a particular SIP request type. The BIG-IP system allows you to track such attacks, using the DoS Protection profile.

DoS Sweep and Flood attacks

A sweep attack is a network scanning technique that sweeps your network by sending packets, and using the packet responses to determine responsive hosts. Sweep and flood attack prevention allows you to configure system thresholds for packets that conform to typical sweep or flood attack patterns. This configuration is set in the DoS Device Configuration.

Malformed DNS packets

Malformed DNS packets can be used to consume processing power on the BIG-IP system, ultimately causing slowdowns like a DNS flood. The BIG-IP system drops malformed DNS packets, and allows you to configure how you track such attacks. This configuration is set in the DoS Protection profile.

Malformed SIP packets

Malformed SIP request packets can be used to consume processing power on the BIG-IP system, ultimately causing slowdowns like a SIP flood. The BIG-IP system drops malformed SIP packets, and allows you to configure how you track such attacks. This configuration is set in the DoS Protection profile.

Protocol exploits

Attackers can send DNS requests using unusual DNS query types or OpCodes. The BIG-IP system can be configured to allow or deny certain DNS query types, and to deny specific DNS OpCodes. When you configure the system to deny such protocol exploits, the system tracks these events as attacks. This configuration is set in the DNS Security profile.