Applies To:

Show Versions Show Versions

Manual Chapter: Getting Started with iWorkflow Virtual Edition
Manual Chapter
Table of Contents   |   Next Chapter >>

What is iWorkflow Virtual Edition?

iWorkflow® Virtual Edition (VE) is a version of the iWorkflow system that runs as a virtual machine in specifically-supported hypervisors. iWorkflow VE emulates a hardware-based iWorkflow system running a VE-compatible version of iWorkflow® software.

Note: There is no hardware-based iWorkflow system supported for this release.

About iWorkflow VE compatibility with vCloud Director hypervisor products

Each time there is a new release of iWorkflow® Virtual Edition (VE) software, it includes support for additional hypervisor management products. The F5 iWorkflow Supported Hypervisors Matrix on the AskF5™ website,, details which hypervisors are supported for each release.

Important: Hypervisors other than those identified in the matrix are not supported with this iWorkflow version; any installation attempts on unsupported platforms might not be successful.

About the hypervisor guest definition requirements

The vCloud Director virtual machine guest environment for the iWorkflow® Virtual Edition (VE), at minimum, must include:

  • 2 x virtual CPUs
  • 4 GB RAM
    Important: When you provision the amount of RAM allocated to the virtual machine, it must match the amount of reserve RAM.
  • 1 x VMXNET3 virtual network adapter
  • 1 x 95 GB disk
Important: Not supplying at least the minimum virtual configuration limits will produce unexpected results.
Important: Although you can successfully deploy iWorkflow software with as few as 2 CPUs and 4 GB RAM, this configuration should only be used for evaluation purposes. For production use, F5 Networks recommends either 4 CPUs and 16 GB RAM, or (for higher performance) 8 CPUs and 32 GB RAM.

There are also some maximum configuration limits to consider for deploying an iWorkflow VE virtual machine, such as:

  • CPU reservation can be up to 100 percent of the defined virtual machine hardware. For example, if the hypervisor has a 3 GHz core speed, the reservation of a virtual machine with 2 CPUs can be only 6 GHz or less.
  • To achieve optimum performance limits, all allocated RAM must be reserved and virtual disks should be deployed Thick (allocated up front).
Table of Contents   |   Next Chapter >>

Was this resource helpful in solving your issue?

NOTE: Please do not provide personal information.

Additional Comments (optional)