After you have reviewed the hardware requirements and become familiar with the Herculon iSeries platform, you can install the unit into a 19-inch rack.
The quick-install rails are optimized for installation into square hole cabinets, but can be installed in other cabinet styles, such as round hole cabinets, using the screws provided. The rails are easily converted to mount to either cabinet style.
For information about installing the platform using the quick-install rails, see the instruction guide provided by the manufacturer, which is included with the rail hardware.
After installing the platform, secure it to the rack with the rail lock brackets that are provided.
When installing using the quick-install rail kit, use these components.
|2||#8-32 pan head screws, steel zinc|
|8||#8-32 thumb screws (from rail kit, use only when installing into a round hole rack)|
|2||Rail lock brackets|
|4||M3 x 6mm flathead screws, black with patch (i2800 only; for rail lock brackets)|
|4||M3 x 8mm flathead screws, black with patch (i5800 and i10800 only; for rail lock brackets)|
You should ground the platform after you install it in a rack. The chassis ground lug is located on the back of the platform.
Do not secure multiple bonding or grounding connectors with the same bolt. The grounding connectors do not need to be removed to perform service or installation procedures. You can connect other bonding or grounding conductors to a grounding connector provided a reliable bond between the connector and the equipment is not disturbed during installation, service, or maintenance of the platform.
Chassis ground lug
The RJ45F to RJ45M rolled serial (pass-through) adapter
You can now assign a management IP address to the system, and then license and provision the software.
Optionally, you should run the latest version of the qkview utility. This utility collects configuration and diagnostic information about your system into a single file that you can provide to F5 Technical Support to aid in troubleshooting. For more information, see: