Manual Chapter : Deploying BIG-IQ Virtual Edition

Applies To:

Show Versions Show Versions

BIG-IQ Centralized Management

  • 4.6.0
Manual Chapter

About VE KVM deployment

To deploy the BIG-IQ® Virtual Edition (VE) system on KVM, you perform these tasks:

  • Verify the host machine requirements.
  • Deploy a BIG-IQ® system as a virtual machine.
  • Deploy a BIG-IP® system.
  • After you have deployed the virtual machines, log in to the BIG-IQ VE system and run the Setup utility. Using the Setup utility, you perform basic network configuration tasks, such as assigning VLANs to interfaces.
  • Configure secure communication between the BIG-IQ system and the BIG-IP device.

Host machine requirements and recommendations

To successfully deploy and run the BIG-IQ® VE system, the host system must satisfy minimum requirements.

The host system must include these elements:

  • RHEL, Ubuntu, Debian, or CentOS with the KVM package. The Virtual Edition and Supported Hypervisors Matrix, published on the AskF5™ web site, http://support.f5.com identifies the Linux versions that are supported.
  • Virtual Machine Manager
  • Connection to a common NTP source (this is especially important for each host in a redundant system configuration)
Important: The hypervisor CPU must meet the following requirements:
  • Use a 64-bit architecture.
  • Have support for virtualization (AMD-V or Intel VT-x) enabled.
  • Support a one-to-one thread-to-defined virtual CPU ratio, or (on single-threading architectures) support at least one core per defined virtual CPU.
  • Intel processors must be from the Core (or newer) workstation or server family of CPUs.

Deploying a BIG-IQ VE virtual machine

The first steps in deploying BIG-IQ® VE are to download the Zip file and then extract the .qcow2 file, and save it to the KVM server. Next, you configure the virtual machine using Virtual Machine Manager.

Important: Do not modify the configuration of the KVM guest environment with settings less powerful than the ones recommended in this document. This includes the settings for the CPU, RAM, and network adapters. Doing so might produce unexpected results.
  1. In a browser, open the F5 Downloads page (https://downloads.f5.com).
  2. Download the BIG-IQ BIG-IQ v4.x/Virtual Edition file package.
    There are two options to choose from.
    Option Description
    Large: the file name ends in .LARGE - qcow2.zip The large option creates a 500GB disk footprint at installation. This choice supports larger log files required for data analytics.
    Normal: the file name ends in .qcow2.zip The standard option creates a 55GB disk footprint at installation. This choice should be the normal working BIG-IQ installation unless data analytics functionality is required.
  3. Extract the file from the Zip archive. Extract the file where your qcow2 files reside on the KVM server.
  4. VNC in to the KVM server, and then start Virt Manager.
  5. Right click localhost (QEMU), and from the popup menu, select New.
    The Create a new virtual machine, Step 1 of 4 dialog box opens.
  6. In the Name field, type a name for the connection.
  7. Select import existing disk image as the method for installing the operating system, and click Forward.
    The Create a new virtual machine, Step 2 of 4 dialog box opens
  8. Type in the path to the extracted qcow file, or click Browse to navigate to the path location; select the file, and then click the Choose Volume button to fill in the path.
  9. In the OS type setting, select Linux, for the Version setting, select Red Hat Enterprise Linux 6, and click Forward.
    The Create a new virtual machine, Step 3 of 4 dialog box opens.
  10. In the Memory (RAM) field, type the appropriate amount of memory (in megabytes) for your deployment. (For example 4096, for a 4GB deployment). From the CPUs list, select 2, and click Forward.
    The Create a new virtual machine, Step 4 of 4 dialog box opens.
  11. Select Customize configuration before install, and click the Advanced options arrow.
  12. Select the network interface adapter that corresponds to your management IP address, and click Finish.
    The Virtual Machine configuration dialog box opens.
  13. Click Add Hardware. When The Add New Virtual Hardware dialog box opens, select Network to access controls for specifying a new network interface device.
  14. From the Host device list, select the network interface adapter that corresponds to your external network, and from the Device model list, select virtio. Then click Finish.
  15. Repeat the last two steps, but this time select the network interface adapter that corresponds to your internal network.
  16. From the left pane, select Disk 1.
  17. Click the Advanced options button.
  18. From the Disk bus list, select Virtio.
  19. From the Storage format list, select qcow2.
  20. Click Apply.
  21. Click Begin Installation.
    Virtual Machine Manager creates the virtual machine just as you configured it.

Powering on the virtual machine

You must power on the virtual machine before you can begin assigning IP addresses.
  1. Open Virtual Machine Manager.
  2. Right click the virtual machine that you want to power on, and then from the popup menu, select Open.
    The virtual machine opens, but in a powered-off state.
  3. From the toolbar, select the Power on the virtual machine (right-arrow) button.
    The virtual machine boots and then displays a login prompt.
  4. Log in as root, and then type config.
    The Configuration utility starts so that you can set up the IP address for the management interface. Once the management IP address is set, you can use a browser and the web interface to configure the BIG-IQ system.

Assigning a management IP address to a virtual machine

The virtual machine needs an IP address assigned to its virtual management port.
Tip: The default configuration for new deployments and installations is for DHCP to acquire the management port IP address.
  1. At the login prompt, type root.
  2. At the password prompt, type default.
  3. Type config and press Enter.
    The F5 Management Port Setup screen opens.
  4. Click OK.
  5. If you want DHCP to automatically assign an address for the management port, select Yes. Otherwise, select No and follow the instructions for manually assigning an IP address and netmask for the management port.
Tip: F5 Networks® highly recommends that you specify a default route for the virtual management port, but it is not required for operation of the virtual machine.