Applies To:

Show Versions Show Versions

Manual Chapter: Platform Specifications
Manual Chapter
Table of Contents   |   << Previous Chapter   |   Next Chapter >>

General specifications for system features

This table lists general specifications for system features for iSeries platforms.

Item Specification
Transceiver modules hot swap Support for hot swap of optical transceiver modules
Fan tray hot swap Support for hot swap of the fan tray
Note: Applies only to i7000 and i10000 Series platforms.
Power supply hot swap Support for hot swap of the power supplies
Jumbo frames Support for maximum Ethernet frame size of 9216 bytes and MTU of 9128 bytes
Virtual Clustered Multiprocessing™ (vCMP™) Supports provisioning and managing multiple, hosted instances of F5® software on a single hardware device
Note: Supported only in platforms running a high performance license (x800).
TurboFlex™ Profiles TurboFlex Profiles are groupings of hardware-accelerated (FPGA) features that are associated with a specific use case. There are currently three available profiles: ADC, Security, and Private Cloud. TurboFlex Profiles are groupings of hardware-accelerated features that are dependent on module licensing. If BIG-IP® LTM® is licensed and provisioned, then the ADC profile is available. If BIG-IP® AFM™ is licensed and provisioned, then the Security profile is available. TurboFlex Profiles are supported only in platforms running a high performance license (x800). Also, TurboFlex Profile availability varies depending on the platform series tier.

Hardware specifications - i5000 Series

This table lists hardware specifications for i5000 Series platforms.

Item Specification
Dimensions H: 1.72 inches (4.37 cm) x W: 17.4 inches (44.20 cm) x D: 30.6 inches (77.72 cm) (per unit) 1U industry standard rack-mount chassis
Weight 24.5 pounds (11.11 kg) with one power supply (per unit)
  • Quick install rail kit adds 4.5 pounds (2.04 kg).
  • Optional mid mount rack brackets add 2.5 pounds (1.13 kg).
  • Additional power supply adds 2.0 pounds (0.91 kg).
Processor 1 x Quad-Core Intel® Xeon® processor (total 8 hyperthreaded logical processing cores)
Communication interfaces 8 x 10GbE SFP+

4 x 40GbE QSFP+ fiber ports

1 x 1GbE management port

1 x RJ45 console port

1 x RJ45 failover port

1 x USB 2.0 interface

Storage drive capacity 1 x 480 GB solid-state drive (SSD)
RAM 48 GB
AC power supply 1 x 650 W 100-240 VAC(+/- 10%) AUTO Switching Platinum

1 x NEMA 5-15P power cords

Important: Specifications are subject to change without notification.

Hardware specifications - i7000 Series

This table lists hardware specifications for i7000 Series platforms.

Item Specification
Dimensions H: 1.72 inches (4.37 cm) x W: 17.4 inches (44.20 cm) x D: 30.6 inches (77.72 cm) (per unit) 1U industry standard rack-mount chassis
Weight 30.0 pounds (13.61 kg) with two power supplies (per unit)
  • Quick install rail kit adds 4.5 pounds (2.04 kg).
  • Optional mid mount rack brackets add 2.5 pounds (1.13 kg).
Processor 1 x Six-Core Intel® Xeon® processor (total 12 hyperthreaded logical processing cores)
Communication interfaces 8 x 10GbE SFP+

4 x 40GbE QSFP+ fiber ports

1 x 1GbE management port

1 x RJ45 console port

1 x RJ45 failover port

1 x USB 2.0 interface

Storage drive capacity 1 x 480 GB solid-state drive (SSD)
RAM 96 GB
AC power supply 2 x 650 W 100-240 VAC(+/- 10%) AUTO Switching Platinum

2 x NEMA 5-15P power cords

Important: Specifications are subject to change without notification.

Hardware specifications - i10000 Series

This table lists hardware specifications for i10000 Series platforms.

Item Specification
Dimensions H: 1.72 inches (4.37 cm) x W: 17.4 inches (44.20 cm) x D: 30.6 inches (77.72 cm) (per unit) 1U industry standard rack-mount chassis
Weight 36.0 pounds (16.33 kg) with two power supplies (per unit)
  • Quick install rail kit adds 4.5 pounds (2.04 kg).
  • Optional mid mount rack brackets add 2.5 pounds (1.13 kg).
Processor 1 x Eight-Core Intel® Xeon® processor (total 16 hyperthreaded logical processing cores)
Communication interfaces 8 x 10GbE SFP+

6 x 40GbE QSFP+ fiber ports

1 x 1GbE management port

1 x RJ45 console port

1 x RJ45 failover port

1 x USB 2.0 interface

Storage drive capacity 1 x 480 GB solid-state drive (SSD)
RAM 128 GB
AC power supply 2 x 650 W 100-240 VAC(+/- 10%) AUTO Switching Platinum

2 x NEMA 5-15P power cords

Important: Specifications are subject to change without notification.

Environmental operating specifications

his table lists platform environmental operating specifications.

Item Specification
Operational temperature 32 to 104°F (0 to 40°C)
Operational relative humidity 5% to 85% (40°C) non-condensing

Up to 93% (40°C) non-condensing for a maximum of
96 hours

Non-operational temperature -40 to 158°F (-40 to 70°C)
Non-operational relative humidity 5% to 93% (40°C) non-condensing

Power specifications - i5000 Series

This table lists power specifications for i5000 Series platforms.

Item Single power supply Dual power supply
Idle power draw (AC power) 110VAC input: 195W

220VAC input: 190W

110VAC input: 205W

220VAC input: 205W

Typical power draw (AC power; 50% load; temp 25°C) 110VAC input: 265W

220VAC input: 260W

110VAC input: 265W

220VAC input: 265W

Maximum power draw (AC power) 110VAC input: 330W

220VAC input: 325W

110VAC input: 330W

220VAC input: 325W

Typical heat generated (AC power) 110VAC input: 905 BTU/hour

220VAC input: 890 BTU/hour

110VAC input: 905 BTU/hour

220VAC input: 905 BTU/hour

Maximum heat generated (AC power) 1130 BTU/hour 1130 BTU/hour
Important: Specifications are subject to change without notification.

Power specifications - i7000 Series

This table lists power specifications for i7000 Series platforms.

Item Single power supply Dual power supply
Idle power draw (AC power) 110VAC input: 210W

220VAC input: 210W

110VAC input: 225W

220VAC input: 220W

Typical power draw (AC power; 50% load; temp 25°C) 110VAC input: 300W

220VAC input: 295W

110VAC input: 310W

220VAC input: 305W

Maximum power draw (AC power) 110VAC input: 390W

240VAC input: 380W

110VAC input: 390W

240VAC input: 390W

Typical heat generated (AC power) 110VAC input: 1025 BTU/hour

220VAC input: 1010 BTU/hour

110VAC input: 1060 BTU/hour

220VAC input: 1280 BTU/hour

Maximum heat generated (AC power) 1045 BTU/hour 1335 BTU/hour
Important: Specifications are subject to change without notification.

Power specifications - i10000 Series

This table lists power specifications for i10000 Series platforms.

Item Single power supply Dual power supply
Idle power draw (AC power) 110VAC input: 290W

220VAC input: 285W

110VAC input: 300W

220VAC input: 295W

Typical power draw (AC power; 50% load; temp 25°C) 110VAC input: 405W

220VAC input: 400W

110VAC input: 415W

220VAC input: 410W

Maximum power draw (AC power) 110VAC input: 520W

240VAC input: 510W

110VAC input: 525W

240VAC input: 520W

Typical heat generated (AC power) 110VAC input: 1385 BTU/hour

220VAC input: 1365 BTU/hour

110VAC input: 1420 BTU/hour

220VAC input: 1400 BTU/hour

Maximum heat generated (AC power) 1775 BTU/hour 1795 BTU/hour
Important: Specifications are subject to change without notification.

Safety requirements

This equipment complies with these requirements of the Low Voltage Directive 2014/35/EU:

EC Type Examination Certificates: Master Contract 252302
CB Scheme
EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
IEC 60950-1:2005, A1:2009+A2:2013
CSA 60950-1-07, Including A1:2011+A2:2014
ANSI/UL 60950-1-2014

EMC requirements

USA--FCC Class A, Canada--Industry Canada Class A

This equipment complies with Part 15 of FCC Rules. Operation is subject to these two conditions:

  1. This equipment may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

European Union

This equipment complies with these requirements of the EMC Directive 2014/30/EU:

As Telecommunication Network Equipment (TNE) in Both Telecom Centers and Other than Telecom Centers per (as applicable):

ETSI EN 300 386 V1.6.1 (2012)
EN 55032:2012/AC:2013
EN 61000-3-2:2014
EN 61000-3-3:2013

As Information Technology Equipment (ITE) Class A per (as applicable):

EN 55024:2010
EN 55032:2012/AC:2013
EN 61000-3-2:2014
EN 61000-3-3:2013

Acoustic and altitude specifications

This table lists acoustic levels and operational altitude specifications for iSeries platforms.

Specification type Detail Value Notes
Acoustic Sound power 72.72 dBA A-weighted Sound Power at 27°C full system load.
Altitude Operational 13,000 Feet Per BELCORE GR-63-CORE, section 4.1.3: This unit is functional when installed at elevations between 60m (197 feet) below sea level and 1800m (6000 feet) above sea level at the aisle ambient temperatures of 40°C.
Non-operational 40,000 Feet

Airflow specifications

This table lists airflow movement specifications for iSeries platforms.

Note: Fan tray airflow measurements taken at 100% duty cycle and in open air.
Platform Value (max)
i5000

97 CFM

i7000/i10000

146 CFM

Restriction of Hazardous Substances Directive (RoHS) for China

Products listed on this declaration comply with the Restriction of Hazardous Substances (RoHS) directive 2011/65/EU and produce required technical documentation in compliance with EN50581:2012.

In accordance with China's Management Methods for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products #32, the following information is provided regarding the names and concentration levels of toxic substances or hazardous substances that may be contained in the following product relative to the standards set by the Standardization Administration of the People's Republic of China.

Table of Contents   |   << Previous Chapter   |   Next Chapter >>

Was this resource helpful in solving your issue?




NOTE: Please do not provide personal information.



Incorrect answer. Please try again: Please enter the words to the right: Please enter the numbers you hear:

Additional Comments (optional)