Applies To:

Show Versions Show Versions

Manual Chapter: Working with Environmental Guidelines for
Manual Chapter
Table of Contents   |   << Previous Chapter   |   Next Chapter >>

Working with Environmental Guidelines for the IP Application Switch Platform
Before you install the IP Application Switch, review the following guidelines to make sure that you are installing and using the IP Application Switch in the appropriate environment.
An IP Application Switch is an industrial network appliance, designed to be mounted in a standard 19-inch rack. To ensure safe installation and operation of the unit:
Install the rack according to the manufacturers instructions, and check the rack for stability before placing equipment in it.
Build and position the rack so that once you install the IP Application Switch, the power supply and the vents on both the front and back of the unit remain unobstructed. The IP Application Switch must have adequate ventilation around the unit at all times.
Do not plug the unit into a branch circuit shared by more electronic equipment than the circuit is designed to manage safely at one time.
This product is sensitive to electrostatic discharge (ESD). We recommend that when you install or maintain the unit you use proper ESD grounding procedures and equipment.
Table of Contents   |   << Previous Chapter   |   Next Chapter >>

Was this resource helpful in solving your issue?




NOTE: Please do not provide personal information.



Incorrect answer. Please try again: Please enter the words to the right: Please enter the numbers you hear:

Additional Comments (optional)