Some of the BIG-IP® Local Traffic Manager™ profiles that you can configure are known as protocol profiles. The protocol profiles types are:
For each protocol profile type, BIG-IP Local Traffic Manager provides a pre-configured profile with default settings. In most cases, you can use these default profiles as is. If you want to change these settings, you can configure protocol profile settings when you create a profile, or after profile creation by modifying the profile’s settings.
To configure and manage protocol profiles, log in to the BIG-IP Configuration utility, and on the Main tab, expand Local Traffic, and click Profiles.
The purpose of a Fast L4 profile is to help you manage Layer 4 traffic more efficiently. When you assign a Fast L4 profile to a virtual server, the Packet Velocity® ASIC (PVA) hardware acceleration within the BIG-IP® system (if supported) can process some or all of the Layer 4 traffic passing through the system. By offloading Layer 4 processing to the PVA hardware acceleration, the BIG-IP system can increase performance and throughput for basic routing functions (Layer 4) and application switching (Layer 7).
You can use a Fast L4 profile with these types of virtual servers: Performance (Layer 4), Forwarding (Layer 2), and Forwarding (IP).
Once you implement a Fast L4 profile, Local Traffic Manager™ automatically selects the most efficient PVA hardware acceleration mode for Layer 4 traffic, if PCVA is supported on the specific BIG-IP® platform. Possible modes are Full, Assisted, and None.
The particular hardware acceleration mode that Local Traffic Manager selects depends on these factors:
Depending on the current mode to which hardware acceleration is automatically set, Local Traffic Manager accelerates Layer 4 traffic
The table shown describes three of the Fast L4 profile settings -- Server Sack, Server Timestamp, and Receive Window.
|Server Sack||Specifies whether the BIG-IP system processes Selective ACK (Sack) packets in cookie responses from the server. The default is disabled.|
|Server Timestamp||Specifies whether the BIG-IP system processes timestamp request packets in cookie responses from the server. The default is disabled.|
|Receive Window||Specifies the amount of data the BIG-IP system can accept without acknowledging the server. The default value is 0 (zero).|
The Fast HTTP profile is a configuration tool designed to speed up certain types of HTTP connections. This profile combines selected features from the TCP Express, HTTP, and OneConnect™ profiles into a single profile that is optimized for the best possible network performance. When you associate this profile with a virtual server, the virtual server processes traffic packet-by-packet, and at a significantly higher speed.
You might consider using a Fast HTTP profile when:
A significant benefit of using a Fast HTTP profile is the way in which the profile supports connection persistence. Using a Fast HTTP profile ensures that for client requests, Local Traffic Manager™ can transform or add an HTTP Connection header to keep connections open. Using the profile also ensures that Local Traffic Manager pools any open server-side connections. This support for connection persistence can greatly reduce the load on destination servers by removing much of the overhead caused by the opening and closing of connections.
When writing iRules®, you can specify a number of events and commands that the Fast HTTP profile supports.
You can use the default fasthttp profile as is, or create a custom Fast HTTP profile.
TCP profiles are configuration tools that help you to manage TCP network traffic. Many of the configuration settings of TCP profiles are standard SYSCTL types of settings, while others are unique to Local Traffic Manager™.
TCP profiles are important because they are required for implementing certain types of other profiles. For example, by implementing TCP, HTTP, Rewrite, HTML, and OneConnect™ profiles, along with a persistence profile, you can take advantage of various traffic management features, such as:
The BIG-IP® system includes several pre-configured TCP profiles that you can use as is. In addition to the default tcp profile, the system includes TCP profiles that are pre-configured to optimize LAN and WAN traffic, as well as traffic for mobile users. You can use the pre-configured profiles as is, or you can create a custom profile based on a pre-configured profile and then adjust the values of the settings in the profiles to best suit your particular network environment.
To access the full set of TCP profiles, log in to the BIG-IP® BIG-IP Configuration utility and navigate toor .
The tcp-lan-optimized profile is a pre-configured profile type that can be associated with a virtual server. In cases where the BIG-IP virtual server is load balancing LAN-based or interactive traffic, you can enhance the performance of your local-area TCP traffic by using the tcp-lan-optimized profile.
If the traffic profile is strictly LAN-based, or highly interactive, and a standard virtual server with a TCP profile is required, you can configure your virtual server to use the tcp-lan-optimized profile to enhance LAN-based or interactive traffic. For example, applications producing an interactive TCP data flow, such as SSH and TELNET, normally generate a TCP packet for each keystroke. A TCP profile setting such as Slow Start can introduce latency when this type of traffic is being processed. By configuring your virtual server to use the tcp-lan-optimized profile, you can ensure that the BIG-IP system delivers LAN-based or interactive traffic without delay.
A tcp-lan-optimized profile is similar to a TCP profile, except that the default values of certain settings vary, in order to optimize the system for LAN-based traffic.
You can use the tcp-lan-optimized profile as is, or you can create another custom profile, specifying the tcp-lan-optimized profile as the parent profile.
The tcp-wan-optimized profile is a pre-configured profile type. In cases where the BIG-IP system is load balancing traffic over a WAN link, you can enhance the performance of your wide-area TCP traffic by using the tcp-wan-optimized profile.
If the traffic profile is strictly WAN-based, and a standard virtual server with a TCP profile is required, you can configure your virtual server to use a tcp-wan-optimized profile to enhance WAN-based traffic. For example, in many cases, the client connects to the BIG-IP virtual server over a WAN link, which is generally slower than the connection between the BIG-IP system and the pool member servers. By configuring your virtual server to use the tcp-wan-optimized profile, the BIG-IP system can accept the data more quickly, allowing resources on the pool member servers to remain available. Also, use of this profile can increase the amount of data that the BIG-IP system buffers while waiting for a remote client to accept that data. Finally, you can increase network throughput by reducing the number of short TCP segments that the BIG-IP® system sends on the network.
A tcp-wan-optimized profile is similar to a TCP profile, except that the default values of certain settings vary, in order to optimize the system for WAN-based traffic.
You can use the tcp-wan-optimized profile as is, or you can create another custom profile, specifying the tcp-wan-optimized profile as the parent profile.
The tcp-mobile-optimized profile is a pre-configured profile type, for which the default values are set to give better performance to service providers' 3G and 4G customers. Specific options in the pre-configured profile are set to optimize traffic for most mobile users, and you can tune these settings to fit your network. For files that are smaller than 1 MB, this profile is generally better than the mptcp-mobile-optimized profile. For a more conservative profile, you can start with the tcp-mobile-optimized profile, and adjust from there.
This list provides guidance for relevant settings
A tcp-mobile-optimized profile is similar to a TCP profile, except that the default values of certain settings vary, in order to optimize the system for mobile traffic.
You can use the tcp-mobile-optimized profile as is, or you can create another custom profile, specifying the tcp-mobile-optimized profile as the parent profile.
The mptcp-mobile-optimized profile is a pre-configured profile type for use in reverse proxy and enterprise environments for mobile applications that are front-ended by a BIG-IP® system. This profile provides a more aggressive starting point than the tcp-mobile-optimized profile. It uses newer congestion control algorithms and a newer TCP stack, and is generally better for files that are larger than 1 MB. Specific options in the pre-configured profile are set to optimize traffic for most mobile users in this environment, and you can tune these settings to accommodate your network.
The enabled Multipath TCP (MPTCP) option provides more bandwidth and higher network utilization. It allows multiple client-side flows to connect to a single server-side flow. MPTCP automatically and quickly adjusts to congestion in the network, moving traffic away from congested paths and toward uncongested paths.
The Congestion Control setting includes delay-based and hybrid algorithms, which may better address TCP performance issues better than fully loss-based congestion control algorithms in mobile environments. Refer to the online help descriptions for assistance in selecting the setting that corresponds to your network conditions.
The enabled Rate Pace option mitigates bursty behavior in mobile networks and other configurations. It can be useful on high latency or high BDP (bandwidth-delay product) links, where packet drop is likely to be a result of buffer overflow rather than congestion.
An mptcp-mobile-optimized profile is similar to a TCP profile, except that the default values of certain settings vary, in order to optimize the system for mobile traffic.
You can use the mptcp-mobile-optimized profile as is, or you can create another custom profile, specifying the mptcp-mobile-optimized profile as the parent profile.
The UDP profile is a configuration tool for managing UDP network traffic.
Because the BIG-IP® system supports the OpenSSL implementation of datagram Transport Layer Security (TLS), you can optionally assign both a UDP and a Client SSL profile to certain types of virtual servers.
Local Traffic Manager™ includes a profile type that you can use to manage Stream Control Transmission Protocol (SCTP) traffic. Stream Control Transmission Protocol (SCTP) is a general-purpose, industry-standard transport protocol, designed for message-oriented applications that transport signalling data. The design of SCTP includes appropriate congestion-avoidance behavior, as well as resistance to flooding and masquerade attacks.
Unlike TCP, SCTP includes the ability to support several streams within a connection. While a TCP stream refers to a sequence of bytes, an SCTP stream represents a sequence of messages.
You can use SCTP as the transport protocol for applications that require monitoring and detection of session loss. For such applications, the SCTP mechanisms to detect session failure actively monitor the connectivity of a session.
With the Any IP profile, you can enforce an idle timeout value on IP traffic other than TCP and UDP traffic. You can use the BIG-IP Configuration utility to create, view details for, or delete Any IP profiles.
When you configure an idle timeout value, you specify the number of seconds for which a connection is idle before the connection is eligible for deletion. The default is 60 seconds. Possible values that you can configure are: