For each profile type, Local Traffic Manager provides a pre-configured
profile with default settings. In most cases, you can use these default profiles as is. If you want to change these settings, you can configure profile settings when you create a profile, or after profile creation by modifying the profiles settings.
The OneConnect profile is a configuration tool for enabling connection
pooling on a BIG-IP system. Connection pooling
optimizes the way that the BIG-IP system handles connections. When connection pooling is enabled on a BIG-IP system, client requests can utilize existing, server-side connections, thus reducing the number of server-side connections that a server must open to service those requests.
The BIG-IP system can pool connections from multiple virtual servers if
those virtual servers reference the same OneConnect profile and the same pool.
Important: To enable connection pooling, you must also enable a related feature known
as the OneConnect Transformations feature. You enable this feature from within an HTTP profile. The OneConnect Transformations
HTTP profile setting applies to HTTP/1.0 connections, and when enabled, causes the system to transform the value of the Connection
header in an HTTP request to Keep-Alive
, to keep the connection open.
The standard address translation mechanism on the BIG-IP system translates
only the destination IP address in a request and not the source IP address (that is, the client nodes IP address). However, when the OneConnect feature is enabled, allowing multiple client nodes to re-use a server-side connection, the source IP address in the header of each client nodes request is always the IP address of the specific client node that initiated the server-side connection. Although this does not affect traffic flow, you might see evidence of this when viewing certain types of system output.
lists and describes the settings of a OneConnect profile type.
NT Lan Manager (NTLM)
is an industry-standard technology that uses an encrypted challenge/response protocol to authenticate a user without sending the user's password over the network. Instead, the system requesting authentication performs a calculation to prove that the system has access to the secured NTLM credentials. NTLM credentials are based on data such as the domain name and user name, obtained during the interactive logon process.
The NTLM profile within BIG-IP Local Traffic Manager optimizes network
performance when the system is processing NT LAN Manager traffic. When both an NTLM profile and a OneConnect profile are associated with a virtual server, the local traffic management system can take advantage of server-side connection pooling for NTLM connections.
lists and describes the settings of an NTLM profile type.
The Statistics profile provides user-defined statistical counters. Each profile
contains 32 settings (Field1
), which define named counters. Using a Tcl-based iRule command, you can use the names to manipulate the counters while processing traffic.
For example, you can create a profile named my_stats
, which assigns the counters tot_users
, and max_users
to the profile settings Field1
, and Field3
respectively. You can then write an iRule named track_users
, and then assign the my_stats
profile and the track_users
iRule to a virtual server named stats-1
. Figure 13.1
shows this configuration.
In this example, the counter tot_users
counts the total number of connections, the counter cur_users
counts the current number of connections, and the counter max_users
retains the largest value of the counter cur_users
Note that list types are case-sensitive for pattern strings. For example, the
system treats the pattern string www.f5.com
differently from the pattern string www.F5.com
. You can override this case sensitivity by using the Linux regexp
lists and describes the settings of a Stream profile type.
A request logging profile gives you the ability to configure data within a log
file for HTTP requests and responses, according to parameters that you specify.
For more information, see the guide titled BIG-IP® Local Traffic ManagerTM: Implementations
or BIG-IP® TMOS® : Implementations.