A virtual server is one of the most important components of any BIG-IP® system configuration. A virtual server is a traffic-management object on the BIG-IP system that is represented by a virtual IP address and a service, such as 192.168.20.10:80. When clients on an external network send application traffic to virtual server, the virtual server listens for that traffic and, through destination address translation, directs the traffic according to the way that you configured the settings on the virtual server. A primary purpose of a virtual server is to distribute traffic across a pool of servers that you specify in the virtual server configuration.
To customize the way that the BIG-IP system processes various types of traffic, you can assign profiles to a virtual server. For example, through profile assignment, a virtual server can enable compression on HTTP request data as it passes through the BIG-IP system, or decrypt and re-encrypt SSL connections and verify SSL certificates. For each type of traffic, such as TCP, UDP, HTTP, SSL, SIP, and FTP, you can assign a custom profile to the virtual server or use the default profile.
When you create a virtual server, you specify the pool or pools that you want to use as the destination for any traffic coming from that virtual server. You also configure its general properties, profiles, SNATs, and other resources you want to assign to it, such as iRules or session persistence types.
You can create several different types of virtual servers, depending on your particular configuration needs.
|Standard||A Standard virtual server (also known as a load balancing virtual server) directs client traffic to a load balancing pool and is the most basic type of virtual server. When you first create the virtual server, you assign an existing default pool to it. From then on, the virtual server automatically directs traffic to that default pool.|
|Forwarding (Layer 2)||You can set up a Forwarding (Layer 2) virtual server to share the same IP address as a node in an associated VLAN. To do this, you must perform some additional configuration tasks. These tasks consist of: creating a VLAN group that includes the VLAN in which the node resides, assigning a self-IP address to the VLAN group, and disabling the virtual server on the relevant VLAN.|
|Forwarding (IP)||A Forwarding (IP) virtual server is just like other virtual servers, except that a forwarding virtual server has no pool members to load balance. The virtual server simply forwards the packet directly to the destination IP address specified in the client request. When you use a forwarding virtual server to direct a request to its originally-specified destination IP address, the BIG-IP system adds, tracks, and reaps these connections just as with other virtual servers. You can also view statistics for a forwarding virtual servers.|
|Performance (HTTP)||A Performance (HTTP) virtual server is a virtual server with which you associate a Fast HTTP profile. Together, the virtual server and profile increase the speed at which the virtual server processes HTTP requests.|
|Performance (Layer 4)||A Performance (Layer 4) virtual server is a virtual server with which you associate a Fast L4 profile. Together, the virtual server and profile increase the speed at which the virtual server processes Layer 4 requests.|
|Stateless||A stateless virtual server prevents the BIG-IP system from putting connections into the connection table for wildcard and forwarding destination IP addresses. When creating a stateless virtual server, you cannot configure SNAT automap, iRules, or port translation, and you must configure a default load balancing pool. Note that this type of virtual server applies to UDP traffic only.|
|Reject||A Reject virtual server specifies that the BIG-IP system rejects any traffic destined for the virtual server IP address.|
|DHCP||A DHCP virtual server relays Dynamic Host Control Protocol (DHCP) messages between clients and servers residing on different IP networks. Known as a DHCP relay agent, a BIG-IP system with a DHCP type of virtual server listens for DHCP client messages being broadcast on the subnet and then relays those messages to the DHCP server. The DHCP server then uses the BIG-IP system to send the responses back to the DHCP client. Configuring a DHCP virtual server on the BIG-IP system relieves you of the tasks of installing and running a separate DHCP server on each subnet.|
|Internal||An internal virtual server is one that can send traffic to an intermediary server for specialized processing before the standard virtual server sends the traffic to its final destination. For example, if you want the BIG-IP system to perform content adaptation on HTTP requests or responses, you can create an internal virtual server that load balances those requests or responses to a pool of ICAP servers before sending the traffic back to the standard virtual server. An internal virtual server supports both TCP and UDP traffic.|
When creating a virtual server, you must specify a destination address. You can specify either a host address or a network address, in either IPv4 or IPv6 format:
Besides directing client connections that are destined for a specific network or subnet, a virtual server can also direct client connections that have a specific destination IP address that the virtual server does not recognize, such as a transparent device. This type of virtual server is known as a wildcard virtual server. Examples of transparent devices are firewalls, routers, proxy servers, and cache servers.
Wildcard virtual servers are a special type of virtual server that have a network IP address as the specified destination address instead of a host IP address.
When the BIG-IP® system does not find a specific virtual server that matches a client’s destination IP address, the BIG-IP system matches the client’s destination IP address to a wildcard virtual server, designated by an IP address of 0.0.0.0. The BIG-IP system then forwards the client’s packet to one of the firewalls or routers assigned to that virtual server. Wildcardvirtual servers do not translate the destination IP address of the incoming packet.
There are two kinds of wildcard virtual servers that you can create:
If you use both a default wildcard virtual server and port-specific wildcard virtual servers, any traffic that does not match either a standard virtual server or one of the port-specific wildcard virtual servers is handled by the default wildcard virtual server.
F5 Networks recommends that when you define transparent nodes that need to handle more than one type of service, such as a firewall or a router, you specify an actual port for the node and turn off port translation for the virtual server.
You can define multiple wildcard virtual servers that run simultaneously. Each wildcard virtual server must be assigned to an individual VLAN, and therefore accepts packets from that VLAN only.
In some configurations, you need to set up a wildcard virtual server on one side of the BIG-IP system to distribute connections across transparent devices. You can create another wildcard virtual server on the other side of the BIG-IP system to forward packets to virtual servers receiving connections from the transparent devices and forwarding them to their destination.
A virtual address is the specific node or network IP address with which you associate a virtual server. For example, if a virtual server's destination address and service port are 192.168.20.10:80, then the IP address 192.168.20.10 is a virtual address.
You can create a many-to-one relationship between virtual servers and a virtual address. For example, you can create the three virtual servers 192.168.20.10:80, 192.168.20.10:443, and 192.168.20.10:161 for the same virtual address, 192.168.20.10.
You cannot explicitly create a virtual address; the BIG-IP system creates a virtual address whenever you create a virtual server, if the virtual address has not already been created. However, you can modify the properties of a virtual address, and you can enable and disable a virtual address. When you disable a virtual address, none of the virtual servers associated with that address can receive incoming network traffic.
When you create a virtual server, BIG-IP® internally associates the virtual address with a MAC address. This in turn causes the BIG-IP® system to respond to Address Resolution Protocol (ARP) requests for the virtual address, and to send gratuitous ARP requests and responses with respect to the virtual address. As an option, you can disable ARP activity for virtual addresses, in the rare case that ARP activity affects system performance. This most likely occurs only when you have a large number of virtual addresses defined on the system.
You create a virtual address indirectly when you create the first virtual server with a destination address that includes the virtual address. You do not explicitly create a virtual address.
For example, if you create a virtual server with a destination address of 192.168.30.22:80, the BIG-IP® system automatically creates the virtual address 192.168.30.22.
Using the BIG-IP™ Configuration utility, you can view the properties of an existing virtual address on the BIG-IP system.
You can modify the properties of a virtual address. For example, you might want to assign a virtual address to a different traffic group, or change the conditions under which the system advertises the virtual address to dynamic routing protocols.
Lists and describes the configuration settings of a virtual address.
|Name||The name that you assign to the virtual address. This name can match the virtual IP address itself.||No default value|
|Partition / Path||The pathname indicating the partition/folder in which the virtual address resides.||/Common|
|Address||The IP address of the virtual server, excluding the service.||No default value|
|Traffic Group||The traffic group that contains this virtual IP address.||traffic-group-1 or traffic-group-local-only|
|Availability||The availability of the virtual address with respect to service checking.||No default value|
|State||The state of the virtual address, that is, enabled or disabled.||Enabled|
|Auto Delete||A directive that the system should automatically delete the virtual address with the deletion of the last associated virtual server. When cleared (disabled), this setting specifies that the system should retain the virtual address even when all associated virtual servers have been deleted.||Enabled|
|Advertise Route||The virtual-server conditions for which the BIG-IP system should advertise this
virtual address to an advanced routing module. This setting only applies when the
Route Advertisement setting is enabled (checked). Possible
||When any virtual server is available|
|Connection Limit||The number of concurrent connections that the BIG-IP system allows on this virtual address.||0|
|ARP||A setting that enables or disables ARP requests for the virtual address. When this setting is disabled, the BIG-IP system ignores ARP requests that other routers send for this virtual address.||Enabled (checked)|
|ICMP Echo||A setting that enables, selectively enables, or disables responses to ICMP echo requests on a per-virtual address basis. When this setting is disabled, the BIG-IP system drops any ICMP echo request packets sent to virtual addresses, including standard statistics and logging. Note that the resulting behavior is affected by the value you configure for the Advertise Route setting.||Enabled|
|Route Advertisement||A setting that inserts a route to this virtual address into the kernel routing table so that an advanced routing module can redistribute that route to other routers on the network.||Enabled (checked)|
Whenever you configure the Source Address and Destination Address settings on a virtual server, the BIG-IP system requires that the route domain IDs match, if route domain IDs are specified. To ensure that this requirement is met, the BIG-IP system enforces specific rules, which vary depending on whether you are modifying an existing virtual server or creating a new virtual server.
|In the destination address, you change an existing route domain ID.||The system automatically changes the route domain ID on the source address to match the new destination route domain ID.|
|In the source address, you change an existing route domain ID.||If the new route domain ID does not match the route domain ID in the destination address, the system displays an error message stating that the two route domain IDs must match.|
|You specify a destination IP address only,with a route domain ID, and do not specify a source IP address.||The source IP address defaults to 0.0.0.0 and inherits the route domain ID from the destination IP address.|
|You specify both source and destination addresses but no route domain IDs.||The BIG-IP system uses the default route domain.|
|You specify both source and destination addresses and a route domain ID on each of the IP addresses.||The BIG-IP system verifies that both route domain IDs match. Otherwise, the system displays an error message.|
|You specify both source and destination addresses and a route domain ID on one of the addresses, but exclude an ID from the other address.||The system verifies that the specified route domain ID matches the ID of the default route domain. Specifically, when one address lacks an ID, the only valid configuration is one in which the ID specified on the other address is the ID of a default route domain. Otherwise, the system displays an error message.|
At any time, you can determine the status of a virtual server or virtual address, using the BIG-IP® Configuration utility. You can find this information by displaying the list of virtual servers or virtual addresses and viewing the Status column, or by viewing the Availability property of the object.
The BIG-IP Configuration utility indicates status by displaying one of several icons, distinguished by shape and color:
The BIG-IP® system includes a performance feature known as Clustered Multiprocessing™, or CMP®. CMP is a traffic acceleration feature that creates a separate instance of the Traffic Management Microkernel (TMM) service for each central processing unit (CPU) on the system. When CMP is enabled, the workload is shared equally among all CPUs.
Whenever you create a virtual server, the BIG-IP system automatically enables the CMP feature. When CMP is enabled, all instances of the TMM service process application traffic.
When you view standard performance graphs using the BIG-IP Configuration utility, you can see multiple instances of the TMM service (tmm0, tmm1, and so on).
When CMP is enabled, be aware that:
You can enable or disable CMP for a virtual server, or you can enable CMP for a specific CPU.