Applies To:

Show Versions Show Versions

Manual Chapter: Packet Filters
Manual Chapter
Table of Contents   |   << Previous Chapter   |   Next Chapter >>

19 
Packet filters enhance network security by specifying whether a BIG-IP® system interface should accept or reject certain packets based on criteria that you specify. Packet filters enforce an access policy on incoming traffic. They apply to incoming traffic only.
You implement packet filtering by creating packet filter rules, using the BIG-IP® Configuration utility. The primary purpose of a packet filter rule is to define the criteria that you want the BIG-IP system to use when filtering packets. Examples of criteria that you can specify in a packet filter rule are:
You specify the criteria for applying packet filter rules within an expression. When creating a packet filter rule, you can instruct the BIG-IP system to build an expression for you, in which case you need only choose the criteria from predefined lists, or you can write your own expression text, using the syntax of the tcpdump utility. For more information on the tcpdump utility, see the online man page for the tcpdump command.
You can also configure global packet filtering that applies to all packet filter rules that you create. The following sections describe how to use the Configuration utility to set global packet filtering options, as well as create and manage individual packet filters rules.
To configure and manage packet filtering, log in to the BIG-IP Configuration utility, and on the Main tab, expand Network, and click Packet Filters.
Global settings for packet filtering are divided into two categories: Properties and Exemptions. The BIG-IP system applies global settings to all packets coming into the BIG-IP system.
Important: Note that one of the global settings, Packet Filtering, enables packet filtering. When you disable this setting, no packet filter settings or packet filter rules operate, and the BIG-IP system allows all traffic by default.
Before you can implement packet filtering on the BIG-IP system, you must enable the packet filter feature. You do this by changing the Packet Filtering setting to Enabled. The default setting for packet filtering is Disabled.
Sometimes a packet does not match any of the criteria that you have specified in the packet filter rules that you have created. For this reason, you must configure the Unhandled Packet Action property, which specifies the action that the BIG-IP system should take when the packet does not match packet filter rule criteria.
Possible values for this setting are Accept, Discard, and Reject. The default value is Accept.
Warning: Changing the default value of the Unhandled Packet Action property can produce unwanted consequences. Before changing this value to Discard or Reject, make sure that any traffic that you want the BIG-IP system to accept meets the criteria specified in your packet filter rules.
Using the Options property, you can configure two other options:
Filter established connections
When you enable (check) this option, the BIG-IP system filters all ingress packets, even if the packets are part of an existing connection. The default setting is disabled (unchecked). Note that checking this option does not typically enhance security, and can impact system performance.
Send ICMP error on packet reject
When you enable (check) this option, the system sends, an ICMP type 3 (destination unreachable), code 13 (administratively prohibited) packet when an ingress packet is rejected. When you disable (uncheck) this option, the BIG-IP system sends an ICMP reject packet that is protocol-dependent. The default setting for this option is disabled (unchecked).
There are a number of exemptions you can set for packet filtering. When filtering packets, the BIG-IP system always applies these exemptions, effectively overriding certain criteria you might have previously set within an individual packet filter rule.
With the Protocols setting, you can specify whether ARP and certain ICMP messages are exempt from packet filtering. The individual settings are:
Always accept ARP
When you enable (check) this setting, the system automatically accepts all ARP packets and therefore does not subject them to packet filtering. The default setting is enabled (checked).
Always accept important ICMP
When you enable (check) this setting, the system automatically accepts the following ICMP packet types for IPv4, and therefore does not subject them to packet filtering:
You can use the MAC Addresses setting to exempt traffic from certain MAC addresses from packet filtering. Possible values are:
Always Accept
When you select this value, a MAC Address List setting appears. You can then specify one or more MAC addresses from which traffic should be exempt from packet filtering.
None
When you select this value, traffic from all MAC addresses is subject to packet filtering, according to existing packet filter rule criteria. This is the default value.
You can use the IP Addresses setting to exempt traffic from certain IP addresses from packet filtering. Possible values are:
Always Accept
When you select this value, an IP Address List setting appears. You can then specify one or more IP addresses from which traffic should be exempt from packet filtering.
None
When you select this value, traffic from all IP addresses is subject to packet filtering, according to existing packet filter rule criteria. This is the default value.
Using the VLANs setting, you can configure the BIG-IP system so that traffic from one or more specified VLANs is exempt from packet filtering. In this case, the system does not attempt to match packets from the specified VLAN or VLANs to any packet filter rule. Instead, the BIG-IP system always accepts traffic from the specified VLAN or VLANs.
For example, if you specify VLAN internal, then no incoming packets from VLAN internal are subject to packet filtering, even if a packet matches the criteria of a packet filter rule.
Always Accept
When you select this value, a VLAN List setting appears. You can then specify one or more VLANs from which traffic should be exempt from packet filtering.
None
When you select this value, traffic from all VLANs is subject to packet filtering, according to existing packet filter rule criteria. This is the default value.
Packet filter rules are criteria statements that the BIG-IP system uses for filtering packets. The BIG-IP system attempts to match packet filter rules with an incoming packet, and if a match exists, determines whether or not to accept or reject the packet.
When you create a packet filter rule, you configure several settings, and then you define the criteria that you want the BIG-IP system to use to filter the traffic.
You use the Order setting to specify the order in which you want the BIG-IP system to apply existing packet filter rules. This setting is required.
First
Select this value if you want this packet filter rule to be the first rule that the BIG-IP system applies.
Last
Select this value if you want this packet filter rule to be the last rule that the BIG-IP system applies.
After
Select this value, and then select a packet filter rule from the list, if you want the system to apply this packet filter after the packet filter that you select from the list. Note that this setting is most useful when you have more than three packet filter rules configured.
When a packet matches the criteria that you have specified in a packet filter rule, the BIG-IP system can take a specific action. You define this action using the Action setting.
Accept
Select Accept if you want the system to accept the packet, and stop processing additional packet filter rules, if any exist. This is the default setting.
Discard
Select Discard if you want the system to drop the packet, and stop processing additional packet filter rules, if any exist.
Reject
Select Reject if you want the system to drop the packet, and also send a rejection packet to the sender, indicating that the packet was refused. Note that the behavior of the system when you select the Reject action depends on how you configured the general packet filter Options property Send ICMP Error on Packet Reject.
Continue
Select Continue if you simply want the system to acknowledge the packet for logging or statistical purposes. Setting the Action value to Continue does not affect the way that the BIG-IP system handles the packet; the system continues to evaluate traffic matching a rule, starting with the next packet filter rule in the list.
Using the Rate Class setting, you can assign a rate class to traffic that matches the criteria defined in a packet filter rule. Note that this setting applies only when you have the rate shaping feature enabled.
The default value for this setting is None. If you previously created rate classes using the rate shaping feature, you can choose one of those rate classes from the Rate Class list.
For more information on rate shaping, see the Configuration Guide for BIG-IP® Local Traffic Manager.
You use the Apply to VLAN setting to display a list of VLANs and then select a VLAN or VLAN group name. Selecting a VLAN from the list means that the packet filter rule filters ingress traffic from that VLAN only. For example, if you select the value *All VLANS, the BIG-IP system applies the packet filter rule to all traffic coming into the BIG-IP system.
Similarly, if you select the VLAN internal, the BIG-IP system applies the packet filter rule to traffic from VLAN internal only. The default value is *All VLANS.
If you select the name of a VLAN group instead of an individual VLAN, the packet filter rule applies to all VLANs in that VLAN group.
If you want to generate a log message each time a packet matches a rule, you can enable logging for the packet filter rule. With this configuration, you can then display the Logging screen in the Configuration utility and view events related to packet filtering. For more information about logging packet filter events, see Chapter 14, Event Logging.
To match incoming packets, the BIG-IP system must use a filter expression. A filter expression specifies the criteria that you want the BIG-IP system to use when filtering packets. For example, the BIG-IP system can filter packets based on the source or destination IP address in the header of a packet.
You can specify a set of criteria (such as source or destination IP addresses) that you want the BIG-IP system to use when filtering packets. When you use this method, the BIG-IP system builds a filter expression for you.
You can have as many rules as you want, limited only by the available memory. Of course, the more statements you have, the more challenging it is to understand and maintain your packet filters.
Table of Contents   |   << Previous Chapter   |   Next Chapter >>

Was this resource helpful in solving your issue?




NOTE: Please do not provide personal information.



Incorrect answer. Please try again: Please enter the words to the right: Please enter the numbers you hear:

Additional Comments (optional)