CPU is not specifically reserved, so to prevent instability on heavily-loaded hosts, you should reserve it manually.
|To||Use this command|
|Turn off rx-checksumming.||ethtool -K eth<X> rx off|
|Turn off LRO.||ethtool -K eth<X> lro off|
|Turn off GRO.||ethtool -K eth<X> gro off|
generic-receive-offload: off large-receive-offload: off
If either of these responses is on, your attempt to turn them off was not successful.
For each directory you want to resize, complete these steps.
If you want to configure a static route that relies on a gateway in the same subnet as the self IP address, you must first disable the setting that enforces single NIC setup:modify sys db provision.1nicautoconfig value disable
Confirm that the value is correct by typing list sys db provision.1nicautoconfig.
The return value should be disable.
If you do not change this value, any time you reboot BIG-IP VE, the manually-configured static route will cause validation errors during load sys config.