Applies To:

Show Versions Show Versions

Manual Chapter: Deploying BIG-IP Virtual Edition in Xen Project
Manual Chapter
Table of Contents   |   << Previous Chapter   |   Next Chapter >>

Deploying BIG-IP VE on Xen Project

To deploy BIG-IP® VE in the open source Xen Project environment, you will create and execute a configuration file.
Important: Do not change the configuration (CPU, RAM, and network adapters) of the Xen Project guest environment with settings less powerful than those recommended and described here.
  1. In a browser, open the F5 Downloads page (https://downloads.f5.com) and log in.
  2. On the Downloads Overview page, select Find a Download.
  3. Under Product Line, select BIG-IP v12.x/Virtual Edition.
  4. Under Name, select Virtual-Edition.
  5. If the End User Software License is displayed, read it and then click I Accept.
  6. Download the BIG-IP VE file package ending with qcow2.zip.
  7. Extract the file from the Zip archive and save it where your qcow2 files reside on the Xen Project server.
  8. Use VNC to access the Xen Project server, and then convert the qcow2 image to the raw format necessary for Xen Project. You can use the following syntax to convert the image.
    # qemu-img convert <qcow_file_name>.qcow2 <raw_file_name>.raw
  9. Generate a MAC address for the network interface card associated with the management interface.
    Important: Be sure that the MAC address you create starts with the prefix 00:16:3e:.
    You can use a tool such as MAC Address Generator (http://www.miniwebtool.com/mac-address-generator/) to create this address.
  10. Use an editor to create a definition file that specifies the required parameters for your VM.
    Use the following example to create a configuration file with the parameters and settings you need.
    # vi /etc/xen/<config_file_name>
                        name = <config_file_name>
                        maxmem = 4096
                        memory = 4096
                        vcpus = 2
                        builder = "hvm"
                        boot = "c"
                        pae = 1
                        acpi = 1
                        apic = 1
                        hpet = 1
                        localtime = 0
                        on_poweroff = "destroy"
                        on_reboot = "restart"
                        on_crash = "restart"
                        sdl = 0
                        vnc = 1
                        vncunused = 1
                        keymap = "en-us"
                        disk = [ "file:/mnt/xen-bender/bigip/<raw_file_name.raw>,hda,w" ]
                        vif = [ "mac=00:16:<mgmt_interface_mac>,bridge=mgmtbr,script=vif-bridge,type=vif",
                        "mac=00:16:3e:<external_interface_mac>,bridge=ext_bridge,script=vif-bridge,type=vif",
                        "mac=00:16:3e:<internal_interface_mac>,bridge=int_bridge,script=vif-bridge,type=vif",]
                        parallel = "none"
                        serial = "pty"
                        #pci = [ '05:10.0', '05:10.1' ]
                        
    Important: The last line of the example shows an optional entry, used for SR-IOV, with the IDs of the PCI external and internal network interface card (NIC). If you use this entry, omit the external and internal bridges specified in the vif section.
    Once you have tested and saved your configuration file, you are ready to create the BIG-IP VE.
  11. Run the configuration file using an open source tool such as xm.
    xm create /etc/xen/<config_file_name>
    If the startup was successful, the console will display text such as: Started domain <config_file_name>(id=444).
  12. Allow sufficient time for the boot-up process in order to connect to the BIG-IP VE console.
    # xm console <config_file_name>

Accessing the BIG-IP VE management user interface

If your network has DHCP, an IP address is automatically assigned to BIG-IP® VE during deployment. You can use this address to access the BIG-IP VE user interface or tmsh command-line utility.

If no IP address was assigned, you can assign one by using the BIG-IP Configuration utility.

  1. At the password prompt, type default.
  2. Type config and press Enter.
    The F5 Management Port Setup screen opens.
  3. Click OK.
  4. If you want DHCP to automatically assign an address for the management port, select Yes. Otherwise, select No and follow the instructions for manually assigning an IP address and netmask for the management port.

You can use a hypervisor generic statement, such as tmsh show sys management-ip to confirm that the management IP address has been properly assigned.

You can now log into the BIG-IP VE user interface, and license and provision BIG-IP VE.
Table of Contents   |   << Previous Chapter   |   Next Chapter >>

Was this resource helpful in solving your issue?




NOTE: Please do not provide personal information.



Incorrect answer. Please try again: Please enter the words to the right: Please enter the numbers you hear:

Additional Comments (optional)