Applies To:

Show Versions Show Versions

Release Note: BIG-IP APM 11.5.0
Release Note

Original Publication Date: 07/20/2016

Summary:

This release note documents the version 11.5.0 release of BIG-IP Access Policy Manager (APM).

Contents:

- Supported platforms
- Module combination support on the 3900
- Configuration utility browser support
- APM client browser support
- User documentation for this release
- Documentation changes in 11.5.0
- Evaluation support
- New in 11.5.0
- New in 11.4.1
- New in 11.4.0
- New in 11.3.0
- New in 11.2.1
- New in 11.2.0
- New in 11.1.0
- New in 11.0.0
- Supported high availability configuration for Access Policy Manager
- Installation overview
     - Installation checklist
     - Installing the software
     - Post-installation tasks
     - Installation tips
- Upgrading from earlier versions
- Upgrading from earlier versions of APM
- Fixes in 11.5.0
- Fixes in 11.4.1
- Fixes in 11.4.0
- Fixes in 11.3.0
- Fixes in 11.2.1
- Fixes in 11.2.0
- Fixes in 11.1.0
- Fixes in 11.0.0
- Usability
- Behavior changes in 11.4.0
- Known issues
- Contacting F5 Networks
- Legal notices

Supported platforms

This version of the software is supported on the following platforms:

Platform name Platform ID
BIG-IP 800 (LTM only) C114
BIG-IP 1600 C102
BIG-IP 3600 C103
BIG-IP 3900 C106
BIG-IP 6900 D104
BIG-IP 8900 D106
BIG-IP 8950 D107
BIG-IP 11000 E101
BIG-IP 11050 E102
BIG-IP 2000s, BIG-IP 2200s C112
BIG-IP 4000s, BIG-IP 4200v C113
BIG-IP 5000s, BIG-IP 5200v

BIG-IP 5050 (requires 11.4.1 HF3)

C109
BIG-IP 7000s, BIG-IP 7200v

BIG-IP 7050 (requires 11.4.1 HF3)

D110
BIG-IP 10000s, BIG-IP 10200v D113
BIG-IP 10050 (requires 11.4.1 HF3) D112
VIPRION B2100 Blade A109
VIPRION B2150 Blade A113
VIPRION B2250 Blade A112
VIPRION C2200 Chassis D114
VIPRION C2400 Chassis F100
VIPRION B4100, B4100N Blade A100, A105
VIPRION B4200, B4200N Blade A107, A111
VIPRION B4300, B4340N Blade A108, A110
VIPRION C4400, C4400N Chassis J100, J101
VIPRION C4480, C4480N Chassis J102, J103
VIPRION C4800, C4800N Chassis S100, S101
Virtual Edition (VE) Z100
vCMP Guest Z101

These platforms support various licensable combinations of product modules. This section provides general guidelines for module support.

Most of the support guidelines relate to memory on the platform or provisioned guest. For vCMP support and for Policy Enforcement Module (PEM), Carrier-Grade NAT (CGNAT), and the BIG-IP 800 platform, the following list applies for all memory levels:

  • vCMP supported platforms
    • VIPRION B2100, B2150, B2250, B4200, B4300, B4340N
    • BIG-IP 5200v, 7200v, 10200v
  • PEM and CGNAT supported platforms
    • VIPRION B2150, B2250, B4300, B4340N
    • BIG-IP 5200v, 7200v, 10200v
    • BIG-IP Virtual Edition (VE) (Not including Amazon Web Service Virtual Edition)
    • PEM and CGNAT may be provisioned on the VIPRION B4200, but it is not recommended for production, only for evaluation. PEM may be provisioned on the VIPRION B2100, but it is not recommended for production, only for evaluation. Use the B4300 or B4340N instead.
  • BIG-IP 800 platform support
    • The BIG-IP 800 platform supports Local Traffic Manager (LTM) only, and no other modules.

Memory: 12 GB or more

All licensable module-combinations may be run on platforms with 12 GB or more of memory, and on VE and vCMP guests provisioned with 12 GB or more of memory.

Memory: 8 GB

The following guidelines apply to the BIG-IP 2000s, 2200s, 3900, 6900 platforms, to the VIPRION B4100 and B4100N platforms, and to VE guests configured with 8 GB of memory. (A vCMP guest provisioned with 8 GB of memory has less than 8 GB of memory actually available and thus does not fit in this category.)

  • No more than three modules should be provisioned together.
  • On the 2000s and 2200s, Application Acceleration Manager (AAM) can be provisioned with only one other module.
  • Note that Global Traffic Manager (GTM) and Link Controller (LC) do not count toward the module-combination limit.
  • To use Access Policy Manager (APM) and Secure Web Gateway (SWG) modules together on platforms with exactly 8 GB of memory, Local Traffic Manager (LTM) provisioning must be set to None.

Memory: Less than 8 GB and more than 4 GB

The following guidelines apply to platforms, and to VE and vCMP guests provisioned with less than 8 GB and more than 4 GB of memory. (A vCMP guest provisioned with 8 GB of memory has less than 8 GB of memory actually available and thus fits in this category).

  • No more than three modules (not including AAM) should be provisioned together.
  • Application Acceleration Manager (AAM) cannot be provisioned with any other module; AAM can only be provisioned standalone.
  • Note that GTM and LC do not count toward the module-combination limit.
  • Analytics (AVR) counts towards the two module-combination limit (for platforms with less than 6.25 GB of memory).

Memory: 4 GB or less

The following guidelines apply to the BIG-IP 1600 and 3600 platforms, and to VE and vCMP guests provisioned with 4 GB or less of memory.

  • No more than two modules may be configured together.
  • AAM should not be provisioned, except as Dedicated.

VIPRION and vCMP caching and deduplication requirements

Application Acceleration Manager (AAM) supports the following functionality when configuring vCMP and VIPRION platforms.

  • AAM does not support disk-based caching functionality on vCMP platforms. AAM requires memory-based caching when configuring it to run on vCMP platforms.
  • AAM supports disk-based caching functionality on VIPRION chassis or blades.
  • AAM does not support deduplication functionality on vCMP platforms, or VIPRION chassis or blades.

vCMP memory provisioning calculations

The amount of memory provisioned to a vCMP guest is calculated using the following formula: (platform_memory - 3 GB) x (cpus_assigned_to_guest / total_cpus).

As an example, for the B2100 with two guests, provisioned memory calculates as: (16-3) x (2/4) ~= 6.5 GB.

For certain platforms, the vCMP host can allocate a single core to a vCMP guest. However, because a single-core guest has relatively small amounts of CPU resources and allocated memory, F5 supports only the following products or product combinations for a single-core guest:
  • BIG-IP LTM standalone only
  • BIG-IP GTM standalone only
  • BIG-IP LTM and GTM combination only

Module combination support on the 3900

Note: The GTM+APM module combination is not supported on the 3900 product platform.

Although SOL10288 states that all modules are supported on all platforms as of BIG-IP version 11.4.0, this does not mean that all possible module combinations are allowed on every platform (especially, legacy platforms).

Configuration utility browser support

The BIG-IP Configuration Utility supports these browsers and versions:

  • Microsoft Internet Explorer 8.x, 11.x
  • Mozilla Firefox 27.x
  • Google Chrome 32.x

APM client browser support

For a list of browser versions that the Access Policy Manager client supports, refer to the BIG-IP APM Client Compatibility Matrix.

User documentation for this release

For a comprehensive list of documentation that is relevant to this release, refer to the BIG-IP APM / VE 11.5.0 Documentation page.

Documentation changes in 11.5.0

In the 11.5.0 release, some manuals were consolidated to improve searchability and Configuration Guide for BIG-IP Access Policy Manager was replaced by two new manuals.

Table 1. Document consolidation and replacement
11.4.x document 11.5.x document
Configuration Guide for BIG-IP Access Policy Manager
  • BIG-IP Access Policy Manager: Implementations
  • BIG-IP Access Policy Manager: Visual Policy Editor
  • BIG-IP Access Policy Manager: Single Sign-On Configuration
  • BIG-IP Access Policy Manager: Authentication Configuration Guide
  • BIG-IP Access Policy Manager: SAML Configuration
BIG-IP Access Policy Manager: Authentication and SSO
  • BIG-IP Access Policy Manager: Hosted Content Implementations
  • BIG-IP Access Policy Manager: Managing OPSWAT Libraries
  • BIG-IP Access Policy Manager: Syncing Access Policies
BIG-IP Access Policy Manager: Implementations
  • BIG-IP Access Policy Manager: VMware Horizon View Integration Implementations
  • BIG-IP Access Policy Manager: Citrix Integration
  • BIG-IP Access Policy Manager: OAM Integration Guide
BIG-IP Access Policy Manager: Third Party Implementations
BIG-IP Access Policy Manager OPSWAT software integration support charts The information is now available by clicking a link on the Welcome page of the BIG-IP Configuration Utility.

Evaluation support

If you have an evaluation license for BIG-IP APM VE, note that it does not include support for Oracle Access Manager.

New in 11.5.0

In this release, APM supports the following new features and enhancements.

Secure Web Gateway

BIG-IP Access Policy Manager implements a Secure Web Gateway (SWG) by adding access control, based on URL categorization, to forward proxy. The access profile supports both transparent and explicit forward proxy modes. The access policy includes support for using a captive portal to collect credentials for transparent forward proxy mode and HTTP 407-based credential capture for explicit forward proxy mode. In addition to user identification by credentials, SWG provides the option to identify users transparently, providing access based on best effort identification. SWG also supports SSL traffic inspection. The benefits that SWG provides include:

  • URL filtering capability for outbound web traffic.
  • Identifying malicious content and providing the means to block it.
  • Applying web application controls for application types, such as social networking and Internet communication in corporate environments.
  • Monitoring and gating outbound traffic to maximize productivity and meet business needs.
  • User identification or authentication (or both) tied to monitoring, and access control compliance and accountability.
  • Visibility into SSL traffic.
Note: Secure Web Gateway is not supported on BIG-IP 1600 and 3600 platforms. SWG requires more memory than is available with those platforms.

Active Directory authentication enhancements

APM supports route domain and password reset for Active Directory.

Active Directory and LDAP group resource assignment enhancements

You can now import groups from AAA Active Directory and LDAP servers for use in group resource assignment.

Maximized Enterprise Application Delivery Value

To make it easier and more affordable to get the Software Defined Application Services capabilities all organizations need, F5 introduces three software bundle offerings: Good, Better, and Best.
Good
Provides intelligent local traffic management for increased operational efficiency and peak network performance of applications.
Better
Good plus enhanced network security, global server load balancing, and advanced application delivery optimization.
Best
Better plus advanced access management and total application security. Delivers the ultimate in security, performance, and availability for your applications and network.
You can learn more about these new software bundles from your F5 Networks Sales Representative.

New in 11.4.1

In this release, APM supports the following new features and enhancements.

Machine Info action retrieves MAC addresses for Linux and Mac systems

You can now use the Machine Info action (formerly, Windows Machine Info action) to retrieve the first and second network adapter MAC addresses for Linux, Mac, and Windows clients. The Machine Info action can retrieve additional machine information for Windows systems that you could retrieve using the Windows Machine Info action in earlier releases.

Important: Starting in this release, the session variable names in which APM stores machine information changed. The names now include machine_info instead of windows_machine_info. For example, previously the MAC address for the first network adapter was stored in this session variable: session.windows_machine_info.last.net_adapter.list.[0].mac_address. Starting with this release, it is stored in this session variable: session.machine_info.last.net_adapter.list.[0].mac_address.

Maximized Enterprise Application Delivery Value

To make it easier and more affordable to get the Software Defined Application Services capabilities all organizations need, F5 introduces three software bundle offerings: Good, Better, and Best.
Good
Provides intelligent local traffic management for increased operational efficiency and peak network performance of applications.
Better
Good plus enhanced network security, global server load balancing, and advanced application delivery optimization.
Best
Better plus advanced access management and total application security. Delivers the ultimate in security, performance, and availability for your applications and network.
You can learn more about these new software bundles from your F5 Networks Sales Representative.

New in 11.4.0

VMware View native proxy

Helps collapse visual desktop infrastructure (VDI) deployments for VMware with consolidated traffic management and authentication with context-based secure access.

Initiating Access Policy from iRules

  • New iRules on the BIG-IP system allow access policies to be initiated from those iRules.
  • Extends the proxy-based security F5 delivers for web applications (web apps) to non-web apps.

Recurring endpoint checks

  • Allows for post-admission periodic endpoint inspections.
  • Reduces the risk of malware infecting endpoints and the network after access is granted.

Always-on and locked client

  • Enables BIG-IP Edge Client, once installed, to be always-on and locked.
  • Increases security, forcing users to authenticate every time the client is unlocked.

Citrix traffic shaping

  • Provides bandwidth control for Citrix ICA traffic.

Local user database support

  • Provides a user authentication service for APM.
  • Enables APM to enforce user lockout for external AAA servers.

HTML profile

  • Supports rule-based patching of HTML, such as content insertion, tag modification/removal, and comment removal.
  • Triggers HTML iRule events when matching specific tags or comments defined by rules.
  • HTML iRules.

Rewrite profile (URI translation)

Supports rule-based URI translation in HTML and CSS.

Hosted content

  • Supports upload of executable files, scripts, text, HTML, CSS files, and image files to APM.
  • Enables file-serving of hosted content from a webtop link, or from a portal access link.

Visual policy editor enhancements

  • Enables search for action items when adding them.
  • Displays action items to add to a policy by category.
  • Enables swapping of policy branches.

AD and LDAP group resource assign

  • Enables creation of domain user group names in APM to mirror Active Directory and LDAP group names.
  • Enables resource assignment to the APM groups.
  • Enables resource assignment to a user's session from every group to which the user belongs.

Endpoint security (client-side) check enhancements

  • Supports anti-spyware, patch management, peer-to-peer, Windows hard disk encryption, Windows health agent software checks (in addition to antivirus and firewall software checks).
  • Enables updates to the supported software through BIG-IP system EPSEC releases.

Microsoft Exchange profile

  • New application access configuration screens streamline and simplify BIG-IP system configuration for various Microsoft services.
  • Removes requirement for user-configured iRules.

Per client connectivity profiles

Provides new configuration screens that separate configuration items per target operating system for BIG-IP Edge Client customization.

SAML

  • Supports Single Logout (SLO) using POST binding.

  • Supports encryption for SAML attributes and subject.

New in 11.3.0

Access Policy Sync

You can now synchronize access policies, including the resources used in them, across Sync-Only device groups. Certain resources are by default location-specific. You can choose to create them as-is or resolve them on the target system.

SAML support

You can configure a BIG-IP system as a SAML identity provider (IdP) or as a SAML service provider (SP). You can federate a group of BIG-IP systems with one acting as an IdP and others acting as SPs. APM supports both IdP- and SP-initiated connections depending on the configuration that you choose to implement. APM provides IdP discovery for SP-initiated connections to a BIG-IP system that acts as a SAML SP.

Note: APM supports SAML version 2.0.

NTLM Authentication from the network edge for Outlook Anywhere clients

Access Policy Manager supports Microsoft Exchange clients that are configured to use NTLM and HTTP Basic protocols independently. Typically, mobile devices use HTTP Basic authentication, while Outlook Anywhere clients can use both NTLM and HTTP Basic authentication. To determine whether a client uses NTLM or HTTP Basic authentication, APM supplies an iRule that makes the determination and enforces the use of one or the other. After a client authenticates with NTLM, APM supports single sign-on with the back-end application or server using Kerberos constrained delegation (KCD).

Native SMS/E-Mail passcode two-factor support

Access Policy Manager supplies an OTP Generate action that generates a one-time, time-sensitive password and an OTP Verify action that verifies that a user entered the correct password before that password expired. The visual policy editor also includes new macro templates:

  • AD auth query OTP by email and resources - Template for sending an OTP over email.
  • AD query auth OTP by HTTP and resources - Template for sending an OTP using the HTTP Auth agent.

IP Reputation

IP intelligence is a separately licensed feature that you can enable on the BIG-IP system. The IP intelligence database includes IP addresses that might be malicious, categorized according to why they are considered untrustworthy. You can check IP reputation from an access policy with the new IP Reputation action. IP reputation is now also included in APM session reports, and a new report, Bad IP Reputation Sessions, is available.

Access policy macro loops

You can set a Maximum Macro Loop Count for a macro now. If you set it to greater than 1, a Loop branch follows the macro in the access policy; a Loop terminal becomes available for you to choose. A macro exits to the Loop branch after it runs a loop (specified with a Loop terminal) for the maximum number of times without breaking out of the loop.

New action items in access policies

  • Date Time - Checks the date or the time to enable time-based access.
  • License Check - Enables license-based access. Checks number of remaining licenses against an absolute value or checks the percentage of licenses remaining against a threshold. You can run a license check for access licenses, connectivity licenses, and concurrent users.
  • IP Reputation - Checks whether an IP address is good (no reputation) or bad with respect to the IP intelligence database, if you have licensed and enabled it.
  • SAML Auth - Authenticates users against an external SAML identity provider when you configure the BIG-IP system as a SAML service provider.
  • IP Subnet Match - Checks whether the client IP address matches an IP subnet.
  • NTLM Auth Result Check - Checks the result of NTLM authentication.
    Note: Use this action only in conjunction with a configuration specified in the BIG-IP Access Policy Manager Authentication guide.

Other new features

  • APM now supports Java-based Application Tunnels on non-Windows endpoints.
  • You can configure the Logon page action to add a CAPTCHA to a login page. Access Policy Manager CAPTCHA support is based on the API that the Google reCAPTCHA service provides. You can use any CAPTCHA service with a compatible API.

New in 11.2.1

There are no new features in this release.

New in 11.2.0

Secure access features

  • Java applet patching

    With Java Applet Patching enabled, BIG-IP APM can patch server-side Java applets in real-time. The clients that run the patched Java applet connect back through the BIG-IP system using SSL in an authenticated APM session. Patched Java applet code is stored in RAM cache, eliminating the need to rewrite every time.

    Note: If the applet contains encrypted JAR files, the BIG-IP system cannot rewrite the applet.
  • Java RDP support for Linux, Mac, and Windows

    A Java RDP client now supports Mac, Linux and Windows clients, providing a cross-platform method to access remote desktops using the RDP protocol over a non-L3 tunnel.

  • Google Chrome browser support

    BIG-IP APM supports the Google Chrome browser. For the latest supported browser versions, refer to the BIG-IP APM Client Compatibility Matrix.

  • Custom parameter fields for terminals

    You can now set custom parameters for remote desktops. These parameters affect the rendering of certain features for both the Citrix and RDP terminal resource types.

  • Pool assignment agent

    In the Visual Policy Editor, you can configure a new agent, Pool Assign, which assigns an LTM pool to a session dynamically.

  • High availability for Active Directory

    Support for high availability for Active Directory authentication had been added; this includes the ability to define an Active Directory pool.

  • Session ID Rotation

    To improve security, part of the session ID is rotated on each response while an access policy is executing.

Manageability and optimization features

  • Improved OPSWAT package management

    To scan for antivirus products on the end client, F5 uses a library from OPSWAT. The library provides the administrator with a consistent API to use against various antivirus products. When an antivirus vendor updates their code base and, in response, OPSWAT updates the library, F5 verifies the library and posts a hotfix. This improvement enables you to apply the hotfix to multiple BIG-IP systems more quickly, by uploading the file to a single BIG-IP system manually and then syncing the file to all devices in a device group.

  • Form-based SSO improvements

    With BIG-IP APM 11.2, in addition to collecting, caching, and proxying user credentials to multiple backend systems using Kerberos, NTLM, and form-based SSO, there is a second method of achieving form-based SSO. This new form-based client-initiated SSO method works by detecting logon request pages from the client application and then parsing the server response for a logon form. Then APM inserts JavaScript that sets the form’s logon name and password placeholder (or token) to match the user’s and perform auto submit. When the client submits this form, APM replaces the password token with the user’s actual credentials and then submits this to the backend application. If the server returns any errors, the form-based client-initiated SSO mechanism disables SSO for that application to preserve connectivity to that application for other users.

  • Mesh Data Deduplication

    A new version of Symmetric Data Deduplication, SDD v3, is optimized for performance in hub and spoke or mesh deployments involving multiple sites.

Usability enhancements

  • Captive Portal Detection in Edge Client

    BIG-IP Edge Client now automatically detects whether the user is behind a captive portal, such as those at hotels and airports, and waits until the user completes sign in to the portal.

  • Citrix Xenapp server non-default ports

    APM now supports Citrix XenApp server configured with ICA/CGP services on ports other than the default ports (1494 for ICA and 2598 for CGP).

New in 11.1.0

Access Policy Manager Clustering

This release adds support for running Access Policy Manager on a chassis platform and in a virtualized Clustered Multi-Processing (vCMP) environment. Access Policy Manager features work in the same fashion when clustered as not with the following caveat. Upon tunnel reconnect due to a blade going down on a chassis platform, flows inside the tunnel are not preserved; users need to reconnect their applications after an underlying tunnel goes down.

XenApp/XenDesktop Support Enhancements

Acess Policy Manager provides a web services interface that allows Citrix Receiver to connect and get application lists from XenApp, thereby:
  • Eliminating the need for XenApp Services Sites
  • Simplifying configuration and number of boxes required

Other enhancements:

  • Provides enhanced support on challenge events in 2-factor authentication when using a Citrix Receiver. Specifically, Access Policy Manager can gracefully handle requests for RSA new PIN codes and AD password expiration.
  • Enables the Webtop to display folders of published apps, mapping what has been shown on the XenApp server.
  • Provides session reliability support for ICA connections: In case of a network problem between the Citrix client and the XenApp server, the application on XenApp Server continues to run and XenApp server buffers the ICA traffic until the client reconnects. The user’s session does not go into a disconnected state as long as the XenApp Server is buffering data for the user. After the connection is restored, XenApp Server flushes the buffered ICA data to the client and the session continues. Access Policy Manager sits between the Citrix client and the XenApp server and interprets and proxies these ICA communications. This feature improves user experience.
  • Supports multi-Stream ICA: BIG-IP Access Policy Manager is first on the market with support for multi-stream ICA. This feature allows for true network-based Quality of Service (QoS) to the ICA/HDX protocol in XenDesktop 5.5 and XenApp 6.5. It is a mechanism to prioritize network traffic, helping to ensure that the most important data gets through the network as quickly as possible.

Windows Credential Manager Integration

This feature integrates with the Windows Credential Manager such that when a user hits ctrl-alt-del, the actual Windows boot process is halted so that the Edge Client can establish a network access tunnel before resuming it. This allows admins to configure new Windows machines to force a password expiration the very first time a laptop/workstation is used regardless of whether it is on a local net or remote.

Linux standalone client

This client can be downloaded from Access Policy Manager and installed on Linux endpoints. This is a command-line client (unlike the Windows or Mac edge clients) but supports endpoint inspection and auto-updates. It provides a simple CLI interface with commands such as Connect, Disconnect, Auto-connect.

New Packaging

Edge Gateway VEs

  • F5-BIG-EGW-VE-200M targets the small enterprise; includes support for 100 concurrent users in the base package; supports 500 maximum concurrent users; limits aggregate throughput to 200Mbps
  • F5-BIG-EGW-VE-1G targets the medium enterprise; includes support for 300 concurrent users in the base package; supports 2500 maximum concurrent users; limits throughput to 1Gbps
  • F5-BIG-EGW-VE-LAB

APM 1600 standalone: Unlike other Access Policy Manager modules, this platform can be used without Local Traffic Manager. It includes support for 500 concurrent users in the base package.

APM on VIPRIONs: Support for APM on VIPRION is provided as an add-on SKU to the VIPRION chassis. There is one add-APM SKU for each chassis model. The format will be similar to appliance add-APM SKUs, with support for 500 concurrent users (for the entire chassis) in the base package and a maximum limit that assumes a fully populated chassis.

IPv6

With this release Access Policy Manager supports IPv6, enabling connectivity between IPv4 and IPv6 networks. Administrators can configure network access lists per supported IP version, IPV4 or IPV4&IPV6 and then configure lease pools and LAN address spaces for IPv4 only or for both IPv4 and IPv6.

This table provides a summary of IPv6 support for various authentication methods:
Authentication Type IPv6 Support Configuration Notes
AD Auth Supported
  • KDC can be configured with IPv6 address.
  • KDC being FQDN or KDC is empty is supported. (Resolved FQDN or discovered KDC address can be IPv6.)
Note: Starting in 11.3, also supported with the pool option.
AD Query Supported using layered virtuals
Note: Starting in 11.3, also supported with the pool option.
  • KDC being FQDN or KDC is empty is supported (Resolved FQDN or discovered KDC address can be IPv6).
  • KDC cannot be configured with an IPv6 address; AD Query with IPv6 address has been tested with the following layered virtual server approach.
    1. In the AD server configuration, use the host name of the DC in the Domain Controller setting.
    2. Update the system's global setting to include a remote host entry for the DC host name that was used in step 1 and map it to an IPv4 address.
    3. Create a pool with the DC IPv6 address as a member.
    4. Create a layered wildcard TCP virtual server as follows.

      Destination IP: The IPv4 address that was used in step 2, that is, 172.31.54.99

      Service Port: 0 (All ports)

      SNAT Pool: Auto Map

      Default Pool (in Resources): Pool created in step 3, that is, /Common/AD-IPv6-Pool

    5. Create another layered virtual as in step 4, but for UDP traffic. (Set the protocol setting in the Virtual server configuration to UDP).

    With the above configuration setting, AD query should work with a IPv6 back end DC.

    Note: For an example in which the above configuration is performed, see the Configuring Resources chapter in the BIG-IP Access Policy ManagerConfiguration Guide.
LDAP Auth and Query Supported via the pool option Admin needs to use the pool option for using IPv6 with LDAP.
RADIUS Auth and Acct Supported via the pool option Admin needs to use the pool option for using IPv6 with RADIUS.
OCSP Not supported  
CRLDP Supported via the pool option Admin needs to use the pool option for using IPv6 with CRLDP.
TACACS+ Supported TACACS+ server can be configured with IPv6 address.
SecurID Not tested/supported IPv6 support for SecurID is supported in Authentication Manager 7.1 for Windows 2008. However, this is not tested.
Kerberos Supported  
HTTP Supported Start URI can be configured with IPv6 address.
                                                   
The following caveats apply to IPv6 support.
Access Type Supported Feature or Client Caveat
Network IPv6 VPN To use an IPv6 tunnel, both an IPv6 tunnel and an IPv4 tunnel must run to the client system simultaneously. On the server side, configure the network access resource with both IPv4 and IPv6 lease pools and set the supported IP version to IPv4&IPv6.
Note: IPv6 VPN is not supported for Android and Windows Mobile.
  Android No IPv6 VPN support.
  Linux Linux and Linux client CLI are supported.
 
  • MAC OS X
  • EDGE client for MAC OS X
  • Supported versions are 10.6 and 10.7.
  • Not suppported with Asian languages.
  Windows 7
  • Edge and Web clients only are supported.
  • Windows Logon integration is not supported.
  Windows mobile No IPv6 VPN support.
Application Application tunnel Accessing IPv6 resources with a static application tunnel is not supported.
Portal IPv6 web applications To support portal access to IPv6 web applications, configure the portal access using either an IPv6 address or a host name. (Host name resolves to both IPv4 and IPv6 addresses.)
Note: The DNS configuration on the APM machine includes an option to specify the IP address family preference; this setting controls which address type to use when the hostname configured in the portal access resource resolves to both IPv4 and IPv6 address types. By default, the setting is empty and the default IP address family preference is IPv4. When the hostname resolves to both IPv4 and IPv6 addresses, APM picks the IPv4 address.

To enable IPv6 preference in 11.1 (so that when the hostname resolves to both IPv4 and IPv6 addresses, APM picks the IPv6 address), you must use a tmsh command, as shown here.

root@(bigipsys)(cfg-sync Standalone)(Active)(/Common)(tmos.sys.dns)# modify include "options inet6"
                  root@(bigipsys)(cfg-sync Standalone)(Active)(/Common)(tmos.sys.dns)# list
                  sys dns {
                  include "options inet6"
                  name-servers { 192.168.125.147 }
                  search { store.siterequest.com }
                  }

Warning: Do not use the include option without assistance from the F5 Technical Support team. The system does not validate the commands issued using the include option. If you use this option incorrectly, you put the functionality of the system at risk.

Logging and Reporting

With this release: For logging, both scalability and performance are enhanced. As a result, report performance is also enhanced. For reporting, when configuring a custom report, available report fields are now organized for selection by: user, resources, sessions, and access policy.

New in 11.0.0

Application Tunnels

This release provides application tunnels to a single application on a remote user's desktop without the security risk of opening a full network access tunnel.

Optimized Network Access Tunnels

With this feature, you can layer full network access tunnels with optimized tunnels for Windows clients.

Remote Desktops

This release provides a hosted remote desktop connection, from a specific remote desktop application to the remote user's desktop, without the security risk of opening a full network access tunnel. Remote desktop is supported for Citrix XenApp server and Microsoft RDP clients.

Kerberos Protocol Translation

With this feature, APM is able to authenticate the user with Active Directory, and then receive a Kerberos ticket on the user's behalf, allowing secure access to the Application server and offloading SSL negotiation from the app server. This feature also makes SSL offload for Smart Card authentication possible.

Kerberos Single Sign-On

With this feature, a user can automatically sign onto backend applications and services that are part of a Kerberos realm, for seamless authentication after the user completes an access policy using a supported authentication scheme.

Oracle Access Manager (OAM) integration

With this release, you can design access policies and manage policy-based access services for Oracle applications on an Oracle Access Manager server from one location.

Flash Patching

In Portal Access, HTML-formatted fields in Flash content are patched by the APM rewrite engine. When rendering an application through the Access Policy Manager, the rewrite engine rewrites the Flash content to render links properly.

Dynamic webtops

The dynamic webtop displays a list of network resources, which include applications, network access and remote desktops, available to a user after authentication. The content of the webtop is dynamic in the sense that only resources for which the user is authorized are displayed to the user. The webtop is customizable based on a user’s identity, context, and group membership.

Reporting system

With the new reporting system, you can generate customized, granular reporting for analysis and troubleshooting purposes. You can generate reports based on many parameters, for example, access failures, users, resources accessed, group usage, or geolocation.

Machine info inspection

The machine info client check allows administrators to examine the security posture of a device, including attributes such as MAC address, CPU ID and HDD ID. The access policy can compare information collected by the machine info check to an allowed list of hardware devices or configurations, then add the result to the access policy. This enables the access policy administrator to identify IT-controlled assets.

Client Type inspector

The client type inspector replaces the UI mode inspector, and includes new branches for the BIG-IP Edge Client, iOS, and Android devices.

Dynamic ACLs

BIG-IP Access Policy Manager can load ACLs from an external authentication database (Active Directory, RADIUS, or LDAP) and apply them dynamically. This allows for a single policy per user, no matter which Access Policy Manager the user is connecting to.

Edge Client for MacOS

The optional BIG-IP Edge Client can be delivered by browser or as a standalone application. Its functionality is identical to the Windows version (though Windows provides more client side checks), in a native MacOS interface. The Edge Client for MacOS is supported on Mac 10.5.x and later, and supports 64-bit OSes.

Adaptive Compression

Compression in resources now compresses downstream data to the client using the best available compression codec, based on network conditions and compressibility of the data.

Supported high availability configuration for Access Policy Manager

Access Policy Manager is supported in an Active/Standby configuration with 2 BIG-IP systems only.
Note: Access Policy Manager is not supported in an Active-Active or an N+M configuration.

Installation overview

This document covers very basic steps for installing the software. You can find complete, step-by-step installation and upgrade instructions in BIG-IP Systems: Upgrading Software, and we strongly recommend that you reference this information to ensure successful completion of the installation process.

Installation checklist

Before you begin:

  • Use BIG-IP iHealth to verify your configuration file. For more information, see SOL12878: Generating BIG-IP diagnostic data using the qkview utility.
  • Update/reactivate your system or vCMP host license, if needed, to ensure that you have a valid service check date. For more information, see SOL7727 - License activation may be required prior to a software upgrade for the BIG-IP or Enterprise Manager system.
  • Ensure that your system is running version 10.1.0 or later and is using the volumes formatting scheme.
  • Download the .iso file (if needed) from F5 Downloads to /shared/images on the source for the operation. (If you need to create this directory, use the exact name /shared/images.)
  • Configure a management port.
  • Set the console and system baud rate to 19200, if it is not already.
  • Log on as an administrator using the management port of the system you want to upgrade.
  • Boot into an installation location other than the target for the installation.
  • Save the user configuration set (UCS) in the /var/local/ucs directory on the source installation location, and copy the UCS file to a safe place on another device.
  • Log on to the standby unit, and only upgrade the active unit after the standby upgrade is satisfactory.
  • Turn off mirroring.
  • If you are running Application Acceleration Manager, set provisioning to Minimum.
  • If you are running Policy Enforcement Manager, set provisioning to Nominal.
  • If you are running Advanced Firewall Manager, set provisioning to Nominal.

Installing the software

You can install the software at the command line using the Traffic Management shell, tmsh, or in the browser-based Configuration utility using the Software Management screens, available in the System menu. Choose the installation method that best suits your environment.
Installation method Command
Install to existing volume, migrate source configuration to destination tmsh install sys software image [image name] volume [volume name]
Install from the browser-based Configuration utility Use the Software Management screens in a web browser.

Sample installation command

The following command installs version 11.2.0 to volume 3 of the main hard drive.

tmsh install sys software image BIGIP-11.2.0.2446.0.iso volume HD1.3

Post-installation tasks

This document covers very basic steps for installing the software. You can find complete, step-by-step installation and upgrade instructions in BIG-IP Systems: Upgrading Software, and we strongly recommend that you reference this information to ensure successful completion of the installation process.

After the installation finishes, you must complete the following steps before the system can pass traffic.
  1. Ensure the system rebooted to the new installation location.
  2. Use BIG-IP iHealth to verify your configuration file. For more information, see SOL12878: Generating BIG-IP diagnostic data using the qkview utility.
  3. Log on to the browser-based Configuration utility.
  4. Run the Setup utility.
  5. Provision the modules.
  6. Convert any bigpipe scripts to tmsh. (Versions later than 10.x do not support the bigpipe utility.)
Note: You can find information about running the Setup utility and provisioning the modules in BIG-IP TMOS implementations Creating an Active-Standby Configuration Using the Setup Utility and Creating an Active-Active Configuration Using the Setup Utility.

Installation tips

  • The upgrade process installs the software on the inactive installation location that you specify. This process usually takes between three minutes and seven minutes. During the upgrade process, you see messages posted on the screen. For example, you might see a prompt asking whether to upgrade the End User Diagnostics (EUD), depending on the version you have installed. To upgrade the EUD, type yes, otherwise, type no.
  • You can check the status of an active installation operation by running the command watch tmsh show sys software, which runs the show sys software command every two seconds. Pressing Ctrl + C stops the watch feature.
  • If installation fails, you can view the log file. The system stores the installation log file as /var/log/liveinstall.log.

Upgrading from earlier versions

Your upgrade process differs depending on the version of software you are currently running.

Warning: Do not use the 10.x installation methods (the Software Management screens, the b software or tmsh sys software commands, or the image2disk utility) to install/downgrade to 9.x software or operate on partitions. Depending on the operations you perform, doing so might render the system unusable. If you need to downgrade from version 10.x to version 9.x, use the image2disk utility to format the system for partitions, and then use a version 9.x installation method described in the version 9.x release notes to install the version 9.x software.

Upgrading from version 10.1.0 (or later) or 11.x

When you upgrade from version 10.1.0 (or later) or 11.x software, you use the Software Management screens in the Configuration utility to complete these steps. To open the Software Management screens, in the navigation pane of the Configuration utility, expand System, and click Software Management. For information about using the Software Management screens, see the online help.

Upgrading from versions earlier than 10.1.0 11.x

You cannot roll forward a configuration directly to this version from BIG-IP version 4.x, or from BIG-IP versions 9.0.x through 9.6.x. You must be running version 10.1.0 software. For details about upgrading to those versions, see the release notes for the associated release.

Automatic firmware upgrades

If this version includes new firmware for your specific hardware platform, after you install and activate this version, the system might reboot additional times to perform all necessary firmware upgrades.

Upgrading from earlier versions of APM

When you upgrade from an earlier version of Access Policy Manager (APM), you might need to resolve issues related to these configurations.

Connectivity profiles

When upgrading from 10.x.x to 11.4.x, connectivity profiles are not fully recovered. You can work around the problem using one of these options:

  • Option 1: Upgrade from 10.x.x to 11.4.x, then reconfigure connectivity profiles in the Access Policy Secure Connectivity area of the Configuration utility.
  • Option 2: Upgrade from 10.x.x to 11.x.x, where 11.x.x is earlier than 11.4.x, then continue upgrading to 11.4.x.

Antivirus and firewall software checks in access policies

If your access policies include custom expressions that rely on session variables created by the antivirus or firewall software checks, after upgrade to 11.4.x, you must configure the antivirus or firewall software checks so that the Store information about client software in session variables property is set to Enabled. (It is disabled by default.)

If the custom expressions include multiple sub-expressions, you might need to edit the expressions.

Citrix client packages

The 11.4.x upgrade script cannot recover any file object with a name that includes space characters. If a Citrix client package file name includes a space, the configuration loads after upgrade, but the Citrix client package file does not function properly. To work around this problem:

  1. Outside of APM, name or rename a Citrix client package without spaces in the name.
  2. Use the correctly named Citrix client package.
    • To fix the problem before upgrade, replace any improperly named Citrix client package as needed.
    • To fix the problem after upgrade, upload a properly named Citrix client package and select it from the connectivity profiles.

Machine accounts for NTLM front-end authentication

APM does not restore NLAD connections when the configuration is restored from an UCS file. After upgrading to 11.4.x, if the previous configuration was using NTLM front-end authentication, the functionality is not restored. To work around this problem, after the upgrade, manually delete the existing machine account configurations and then recreate them.

Advanced customization

If you performed any advanced customization of files, you must upgrade these files manually.

Custom reports

Custom reports are lost after upgrade. To work around this issue, export your custom reports before you upgrade and then reimport them after you upgrade.

OAM configuration

When upgrading from version 10.2.x to 11.x with an OAM configuration, upgrade fails. To work around this issue: before you upgrade, delete the OAM configuration; after the upgrade is complete, create a new OAM configuration in version 11.x.

Access policies that use session variables

If you are upgrading from 10.x, you might need to update access policies that use session variables. Version 11.x introduces the concept of partitions. A partition is added to an object name. An access policy that compares a session variable against a value would behave differently after upgrade. This example shows the difference in the value of a session variable between these versions.

  • Version 10.x - session.ad.MyPolicy_act_active_directory_auth_ag.authresult
  • Version 11.x - session.ad./Common/MyPolicy_act_active_directory_auth_ag.authresult

The partition, /Common, is added to the version 11.x object name.

Fixes in 11.5.0

ID number Description
238494 The F5 Credential Management service now updates automatically on the BIG-IP Edge Client. To get SSO working after update, user should reboot the machine.
325296 Previously, APM supported only LDAP URLs for CRL distribution points. Now, APM also supports HTTP URLs.
381486 Information about session length, connection timeout and idle time is added to BIG-IP Edge Client. Information about used tunnel type, session length, idle time and session timeout is added to web browsers."
386888 Citrix application icons used on the APM webtop are cached on BIG-IP system now; this reduces load on the back end and improves icon loading time.
390462 Visual policy editor now supports Internet Explorer 10 and 11.
392250 When Access Policy OAM Support is enabled on a virtual server and the AccessGate setting specifies a particular accessgate instead of Default, users are no longer intermittently redirected to an OAM error page.
394176 The access policy item, Windows Registry, now supports REG_MULTI_SZ fields.
394184 Remote desktop Java client now supports connections to Windows 8 and Windows Server 2012 hosts.
394449 Now, AD and LDAP can parse multiple entries in LDAP response
396735 Prevent authentication failure if both SAML assertion and response are both signed
400433 Daemons (apd/apmd) are more robust.
401658 APM now hides network access, remote desktop, and application tunnel resources from APM webtops on Windows 8 ARM.
402297 An administrator can build visual policy editor rules to detect a "Windows 8" running on ARM processor and create appropriate branches.
402699 For BIG-IP Edge Client on Windows systems, when APM network access is configured to close idle connections, a notification about the idle connection displays ahead of time.
406916 The upgrade script now handles client-packaging with multiple folders in full path name.
407362 When a desktop requested by the user is not immediately available (as reported by XML Broker), APM waits for some time and retry launching attempt predefined number of times.
408665 The APM PCoIP Proxy implementation is compliant with Teradici certification.
409438 APM now supports SSL Relay when working with Web Interface site
413486 On the BIG-IP Edge Client for MAC OS X, the text copy and paste action, to and from the clipboard, now works correctly.
413661 Access policies that were copied from other policies no longer lose their images when the original policy is deleted.
414370 Clients no longer receive a TCP reset if an ASM profile is configured and access was disabled with the "ACCESS::disable" iRule.
415844 The BIG-IP system now assigns special identifier (SPI) values to VMware View clients. Clients no longer use self-generated SPIs.
416949 "Login failed" no longer displays as the caption of the Citrix Logon Dialog box on the APM webtop when the user successfully logs into a Citrix resource, but has no apps assigned to him.
417289 A Java remote desktop resource now uses the en-us keymap (US keyboard) for the logon screen by default. Previously, en-gb (UK keyboard) was the default keymap.
417908 Now accounts in Citrix Receiver for Windows can be registered by entering only the domain name of APM virtual server.
418082 APM webtop now supports VMware View HTML5 client.
418231 Now ICA Proxy does not attempt to modify an ICA file if it detects that an STA ticket is used. The list of STA servers configured through a session variable named "session.citrix.sta_servers" is used to resolve STA tickets. The list of STAs should contain one or more URLs delimited by semicolon.
418610 Various APM related cookies are now set to a secure option.
418976 Citrix apps icons on APM webtop are cached by the browser now, which improves webtop page load times.
419127 A new global variable, F5_noContextSwitching, turns off part of the processing on the client side in case of web application slowdown. You can use an iRule to set the variable on a page.
419237 APM now supports launching VMware View desktops from APM webtop using standalone View client.
419654 VMware View client for Linux 2.0 is supported by APM PCoIP proxy.
419780 APM now encodes URLs for the prevention of XSS attacks using a less aggressive mechanism.
419859 Visual policy editor configuration pages for peer-to-peer software, HD encryption software, health agent software checks are improved.
419955 CPU usage by Kerberos library during some error conditions is acceptable now.
419984 Sessions that share the same TCP connection are no longer terminated when a new client connects using the same connection.
420013 EMC applet works now.
420543 OPSWAT checks workflow is restored; it is possible to save after the changes
420706 APD process now takes significantly less time to apply an access policy.
420743 SAML IdP automation now gracefully handles a metadata file that is missing an EntityDescriptor tag.
420961 The Tcl encoding command is now available for use in visual policy editor expressions.
421055 It is now possible for an end user to change their AD password.
421068 When you use APM portal access that has an iframe or frame that runs an HTML file which includes a parent.document.write(some_html_with_script) statement, Internet browser response is now acceptable.
421259 Secure session variable now decrypts correctly and is the correct length.
421499 BIG-IP Edge Client for MAC OS X code now handles network access over a third party PPTP VPN connection.
421522 APM now handles an empty AVP-24 ("state") in a RADIUS Access-Challenge request.
421566 The root cause of a logd core has been corrected with thread save call to localtime_r().
421648 Documentation now contains correct values for the Machine Info agent.
421796 SAML single logout (SLO) now succeeds when a SAML Service Provider (SP) session times out, the user logs in to the SAML SP again, and the user initiates SLO.
422135 RSA Next Token and New PIN modes are supported for Citrix Xenith and Xenith2 clients using RADIUS server.
422194 Access no longer resets a TCP connection if a client requests the landing URI on the slave twice before completing an access policy.
422396 You can now start a Citrix application with an ampersand in its name from an APM webtop.
422516 A notification displays when reboot is required after the Cred Mgr has been updated.
422550 You can use APM local user database from iRules now.
422697 A Java remote desktop resource now works on a Mac system that is affected by an Oracle issue, bug 7180557.
422948 If you change a rule expression in a macro, the "Apply Access Policy" link now appears as expected.
423260 Now all software checks are directly available in the agent selector in a branch rule expression
423435 The access policy item, Windows Registry, now correctly compares pure numbers.
423751 A case where policy evaluation is in process and an existing client connection is disconnected is now handled correctly.
423848 Using Device Wizards (Network Access Setup Wizard for Remote Access) to create Network Access (with client-side checks enabled) for remote access now produces an antivirus action with entries.
423897 BIG-IP Edge Client for MAC OS X handles ending redirect correctly.
424067 Proper Windows 8.1 and Internet Explorer 11 detection implemented for BIG-IP APM.
424117 APM supports Windows Citrix Receiver 4.0
424199 Initial access to cookies on a page from a dynamically loaded script no longer causes intermittent Firefox browser halt.
424371 Protected Workspace code was changed to allow Internet Explorer 11 and Windows Explorer to start on Protected Workspace Desktop (on Windows 8.1).
424572 APM SAML can now operate with other systems using either or both of these groups of algorithms: RSA-SHA256/RSA-SHA512 XML signature algorithms SHA256/SHA512 digest algorithms. It continues to sign its own SAML messages (AuthnRequests and Assertions) using RSA-SHA1.
424577 Support for Windows 8.1 Inbox F5 VPN detection is available in APM visual policy editor; an additional branch was implemented for the Client Type Access Policy action.
424587 A SharePoint 2013 homepage can now successfully render in Internet Explorer 11 when it runs through APM content rewrite.
424607 APM portal access with split tunneling enabled now selects the action correctly for URLs containing the %0a' character string when requests are initiated by JavaScript.
424661 You should no longer see the following Tcl error message in the /var/log/ltm log file. TCL error: _sys_APM_activesync HTTP_REQUEST - can't read "actsync_401_http_body": no such variable while executing: "HTTP::respond 401 content $actsync_401_http_body Connection close".
424969 Fixed a rewrite plugin crash that could occur when sending POST requests with specific XML data through portal access.
425166 Fixed BIG-IP Edge Client crash which caused incorrect memory copying routine during disconnect process.
425853 Included Launch Application for MAC OS X to work if the string contains an ampersand.
425884 When an admin tries to upload and install a new epsec package, the admin will no longer see a Configuration error.
425904 Now Flash AS2 jump instructions should be properly rewritten.
426185 Flash AS2 content is properly rewritten now.
426439 Portal resource now opens properly after a Citrix or a View resource has been used on an APM webtop.
426685 Now Citrix/VMware View support works on virtual addresses of the 'traffic-group-local-only' as well.
426850 The BIG-IP system configured as a SAML service provider (SP) now processes encrypted assertions.
427076 An error no longer occurs during logon to a web application using client initiated form-based SSO.
427725 An issue in which TMM produces core files in access deployments has been fixed.
427743 iOS Receiver now works when APM is configured with StoreFront integration or when APM is configured for two-factor authentication.
427762 Fixed issue with session re-establishing for iOS Citrix Receiver.
427804 The IE 11 on Windows 7 user agent is now detected correctly.
427819 Network access restores proxy settings when a user signs out from a Windows-based session and schedules proxy cleanup operations to start on the next Windows user sign in.
427864 The VMware View client can now connect through APM when the backend replies with a chunked response.
428306 When using the svpn plugin proxy service on a Mac system, the plugin works correctly when it probes 127.0.0.1:44444.
428390 Log messages for client initiated form based and SAML SSO are working again.
428417 Support for Windows 8.1 platform detection implemented in Windows client code.
428450 The rewrite process no longer loops when working with malformed Flash files.
428595 A user who can access visual policy editor in read-only mode can now switch to the Branch Rules tab.
428784 Fixed absence of session timeout window on the logon page in Safari browsers that forced users to enter credentials again after the Login button is pressed. This fix will not affect already customized logon pages.
428933 Cookies created from JavaScript with the wrong date format in the expires field are processed correctly.
429031 Removed negative cases from expression builder for software checks
429163 Resolved issue where InstallerService is not installed and Internet Explorer is used so that the correct newer components are employed to avoid reconnect looping when per-user is used, instead of per-machine.
429171 Flash ActionScript 3 files from different domains with conflicting class definitions now work correctly through Portal Access.
429617 Windows RT users can now access webtop links and portal access resources on APM webtop.
429680 Response headers are parsed correctly for any responses with unsupported content.
429704 The Disable/Enable logic for Unlock User button is fixed.
429741 A Windows RT branch is added to the "Client OS" action in APM Access Policy.
430669 The issue where Internet Explorer 11 did not always allow access to "window.opener" is fixed.
430819 AD/LDAP non-printable attributes are now detected as such.
430899 Records installed in session db keep track of license counts during regular operation on chassis.
430962 Previously when F5 Networks VPN Adapter was disabled by user, manually connecting to the VPN would fail. Now the adapter is automatically enabled in this case and VPN connections can successfully be established.
430965 Resolved issue where Windows 8.1 SetupDiGetDeviceRegistryProperty function returned hardware IDs with spaces replaced with underscores, to allow VPN driver to be uninstalled. This addresses issues with the VPN driver update.
431076 Driver installer fixed to re-install client stonewall driver independently from VPN driver.
431216 Internet Explorer 11 does not recognize PAC files specified with the "file://" prefix. To work around this issue Network Access automatically enables "Client Proxy Uses HTTP for Proxy Autoconfig Script" for Internet Explorer 11 clients.
431377 and 431381 Improved JavaRDP compatibility with Windows 8 / 2012 Server hosts
431508 APM displays UTF-8 HTML pages correctly.
431976 Maximum number of entries in subject alternative name is not limited anymore in server certificate check module of Linux CLI.
432049 Sessions from BIG-IP Edge Client on iOS now can be filtered by CPU type in visual policy editor.
432096 Layered virtual with matching destination can now intercept MobileSDK and/or JavaPatcher traffic.
432721 RemoteDesktop module will use the configured search domain, while resolving short names for mobile app tunnel connections.
432851 Mac File and Linux File access policy items work correctly when the specified file size is greater than 1024 bytes.
433605 At the end of an APM network access session, the route is now restored for an interface that has a gateway and IP address on different subnets, provided that the gateway and IP address have not changed during the session.
433781 APM now correctly processes any HTTP headers.
433839 Now, if the peer is shut down, Kerberos immediately terminates the connection.
433982 Detection of Internet Explorer is improved in APM Portal Access.
434049 Fixes for supporting multiple customization_templates during tmsh load sys config merge.
434776 A Windows File, Mac File, or Linux File agent can be added to an access policy without causing APD or APMD to crash.
435329 Layered virtual servers are now assigned the correct IP addresses, and no longer conflict or interfere with each other.
435383 When deleting an Accessgate from OAM server configuration, wrong MCPD validation prevented deleting the second to last Accessgate. This fix will result in throwing the MCPD error, while deleting the last Accessgate only, as expected.
435436 Users can use APM with VMware View when the View resource uses pool of more than two View Connection servers
435449 Request no longer hangs and no errors occur.
435900 XDomainRequest is supported similar to XMLHTTPRequest.
436049 Fixed a rare case of crash in rewrite plugin.
436175 Upgrade script is fixed to handle empty bodied Citrix Client Bundle (all on one line).
436616 CTU correctly enables logs for 64-bit services on Windows systems.
436788 Corrected page handlers to return to OAM AAA Server listing page upon saving.
437227 Memory leak has been fixed in the rewrite daemon.
437731 Optimized tunnel works correctly with Internet Explorer now.
437952 VPN installation now launches under Protected Workspace (PWS) on Windows 8.1.
438219 The access policy daemon (apd) process no longer leaks memory with AD and LDAP Query agents.
438251 Now when using Outlook Web Access (OWA) 2010 from a portal access webtop, new messages are shown automatically in the mailbox and the message indicator changes accordingly depending on whether the messages are read or unread.
438664 F5 Client Traffic Control Service now works on Windows 7. Previously the service started and then stopped.
438709 Users can now open the calendar widget in SharePoint 2007 while using Internet Explorer browsers with portal access.

Fixes in 11.4.1

ID number Description
392250 When Access Policy OAM Support is enabled on a virtual server and the AccessGate setting specifies a particular accessgate instead of Default, users are no longer intermittently redirected to an OAM error page.
413661 Access policies that were copied from other policies no longer lose their images when the original policy is deleted.
417908 Now accounts in Citrix Receiver can be registered by entering only the domain name of the APM virtual server.
418231 Now ICA Proxy does not attempt to modify an ICA file if it detects that an STA ticket is used. The list of STA servers configured through a session variable named session.citrix.sta_servers is used to resolve STA tickets. The list of STAs should contain one or more URLs delimited by a semicolon.
419780 This release uses a less aggressive mechanism to encode URLs for the prevention of XSS attacks.
420740 Policy Sync now works for an access policy that includes a Windows Registry action.
420743 SAML IdP automation now gracefully handles a metadata file that is missing an EntityDescriptor tag.
421068 When you use APM portal access and click a link that runs an HTML file that includes a parent.document.write (some_html_with_script) statement, an Internet browser screen no longer hangs.
421315 A TMM core for network access scenarios no longer occurs.
421356 This release fixes a rewrite plugin crash that could happen when accessing some HTML pages through APM portal access.
421566 The root cause of the logd core has been corrected.
422331 The access policy Deny ending agent displays the correct error message now for some additional cases: Your session could not be established.
424861 When you configure the antivirus action in the Client Classification and Prelogon Checks VPE macro template, it now presents an entry on the Property page. It also presents the correct expression on the Branch Rules tab: expr { [mcget {session.check_software.last.av.result}] == 1 }.
424969 This release prevents a rewrite plugin crash that could occur when sending POST requests with specific XML data through portal access.

Fixes in 11.4.0

ID number Description
354628 When using portal access to access OWA using NTLM authentication without SSO configured, the upload of a large attachment to attach to an email message no longer stops and the server no longer provides a 401 response.
358876 When a user's password for Active Directory authentication expires, Access Policy Manager (APM) presents a form to the user to change and confirm a new password. If the new password does not comply with password complexity checks, APM no longer requests old credentials a second time, but prompts for a new password and confirmation until surpassing the maximum number of password reset attempts.
365453 Now APM Citrix proxy fully supports Wyse Xenith terminals.
369780 When you use the client to access Microsoft SharePoint 2010 and upload multiple files, the Upload Multiple Documents dialog box now closes automatically after upload.
369815 If Kerberos Key Distribution Center (KDC) is not accessible, Active Directory authentication module log messages now include a user name.
373273 To use the HD Encryption Endpoint Security client-side check, you should disable the User Account Control (UAC).
376000 Uploading files when accessing a web application using APM portal access mode now works correctly. This includes sending an email message with an attached file using Outlook Web Access (OWA).
376260 Portal access now patches URLs in HTTP refresh headers.
378969 Now a captive portal is properly detected in the Force all traffic through tunnel mode.
381488 Applications that report a HTTP user-agent string that APM does not understand are treated as an unknown client type.
382993 Previously, the access policy redirect ending did not support arbitrary session variables. Now any session variables specified in the redirect URL are supported.
383332 When an administrator makes changes in Advanced Customization mode and switches to the Properties Customization mode, changes are now saved.
383917 The service type that is specified in the RADIUS AAA server configuration is now included in RADIUS accounting stop messages.
384313 A newly uploaded EPSEC package is now available on all devices in the device group where the most recent EPSEC installation was done.
384391 Now one Network Access resource can be launched automatically, directly after user login.
385055 Now you can create more than one AAA Active Domain server object that specifies the same domain name but different domain controllers.
385597 Introduced quiet mode for BIG-IP Edge Client for Windows standalone in which it does not show any screen or pop-ups.
386046 A confusing message about the RAS subsystem was displayed when running self-diagnostics. The message is now correct.
386147 APM now supports Department of Defense (DoD) Common Access Care (CAC) authentication using single sign-on to back end servers that run Citrix applications.
386342 A Mac network access client now properly deallocates memory after routing table manipulation.
386478 If the state of the VPN connection to the BIG-IP system changes, a notification displays.
386758 You can now import an access policy when a new ACL is order 0 and an ACL with that order already exists.
386887 Citrix Receiver clients now work with multiple APM Citrix remote desktop resources. Previously, they were limited to one resource.
388023 This release fixes a rare case in which Edge Client would crash.
388514 Previously when accessing public folders on OWA 2003 through portal access, a customer might see an error, Login Timeout failed with HTTP status code 440. The error occurred because backend cookies were not inserted. Now, the rewrite plugin inserts backend cookies correctly for this case and errors do not occur when accessing public folders on OWA 2003.
388784 There was a conflict between Windows Server 2008 and MIT Kerberos interpretation of kvno field size. As a result, users could not sign on using APM Kerberos SSO when the BIG-IP system used a read only domain controller as a KDC. The conflict is resolved.
389262 A crash occurred when looking up a property name beginning  with 0 (zero). Portal access rewrite no longer crashes in this case.
389564 DNS SRV records are now redirected according to the network access split tunneling mask.
389744 BIG-IP Edge Client for Mac now displays the current server after redirection.
391428 Now if macro settings change and the macro is in use, the link Apply Access Policy displays at the top of screen.
391514 The system now handles the condition where the DNS relay proxy service fails to get the list of DNS servers on a particular machine.
391517 Some icons for Citrix published applications were not rendered correctly on an APM webtop, and the default icon was used instead of an application-specific icon. Now all icons render correctly on a webtop.
392250 When Access Policy OAM Support is enabled on a virtual server and the AccessGate setting specifies a particular accessgate instead of Default, users are no longer intermittently redirected to an OAM error page.
392745 BIG-IP Edge Client customizations (for example, banner color and logo) for Chinese languages are now correctly applied.
394025 A simplified Flash rewriting algorithm is used to avoid a problem with patching of SWF content with AS2.
394363 BIG-IP Edge Client and client components could not be installed due to an expired certificate. This problem no longer occurs.
395990 In some route domain and SNATpool deployments, the APM virtual server (used to send reset) was not accessible. This issue is now fixed.
397088 APM now supports more than one referral by Active Directory authentication during cross-domain authentication.
399148 For a Citrix remote desktop resource on a webtop, visible application icons (those that are not in folders) are now loaded first.
399411 The Protected Workspace (PWS) option, Allow write access to USB flash drives, is now applied to Windows portable devices.
399957 Now an administrator can select the Kerberos Preauthentication Encryption Type option for an AAA Active Directory server and include preauthentication within the first AS-REQ packet.
399999 APM now supports Citrix Receiver email-based auto-discovery using DNS SRV records.
400675 When an XML Broker is used in standalone mode, Citrix icons are now displayed on an APM full webtop in Internet Explorer 9.
400896 An issue with handling certain types of commands within Flash is corrected.
401658 APM now hides network access, remote desktop, and application tunnel resources from APM webtops on Windows 8 ARM.
401835 In HA active/standby setup, EPSEC Software Status on Active is no longer lost on upgrade from 11.2.x. 
402715 After an administrator changes the SSO client-initiated form-based configuration in multi-domain SSO multiple times, SSO now continues to work correctly.
402741 The BIG-IP Edge Client now cleans up on exit when a user logs off while a network access connection is established.
402745 This release improves handling of URL arguments in Flash objects.
402878 If a failover happens while an access policy sync is in progress, APM now handles it correctly.
403062 APM now correctly throws a security exception when a DOM security violation occurs.
403214 APM no longer prompts a user to change password when Password never expires is enabled for the user even when you define required attributes in the AD Query action.
403227 Access policies that are not in the /Common partition can now be synced.
403326 In web application access mode, attempts to access a backend server file, such as an Excel file, from Internet Explorer are successful.
403668 Now when using XenDesktop backend servers, high resolution application icons are displayed on Citrix PNAgent clients.
404461 APM has improved response time when processing an index of type number.
404608 A scrollbar is not longer displayed on a Remote Desktop screen in the Chrome browser.
404675 Kerberos SSO configurations where Server Principal Name (SPN) is specified literally in SPN Pattern field (that is, HTTP/server.host.name@SERVER.REALM without %s or %h) now work.
404739 A BIG-IP system configured as a SAML identity provider (IdP) now supports IdP-initiated SSO to Google Apps.
405088 If you have a Java application tunnel for Linux or Mac with an application that includes a space in the application path, the application now runs.
405215 The user role Manager now grants a user permission to create and modify SAML configurations.
405218 APM rewrite profiles can now handle a bypass list that contains more than 26 entries.
405429 Internet Explorer 8 no longer hangs for five minutes when all browser connections are in use; this was observed previously during portal access rewrite.
405572 TMM no longer crashes during establishment of a network access connection.
405746 Citrix resources now load correctly on an APM webtop even when the Internet Explorer advanced setting, Enable native XMLHTTP, is cleared.
405948 Multi-domain single sign-on (SSO) now saves the correct landing URI in the session.server.multidomain_landinguri session variable.
405956 A transient interruption in communication with a key distribution center (KDC) resulted in a 10-minute lockout if no alternate KDC was available.  The lockout interval could save time by preventing repeated attempts to use an unavailable KDC. However, if no alternate KDC is available and the interruption is actually brief, the lockout is excessive. The lockout value is now configurable. For more information, see SOL14319: BIG-IP APM Active Directory authentication may not recognize an offline domain controller has been restored, available in the AskF5 Knowledge Base.
405972 Flash rewriting errors are now reported with the correct log level, ERR.
406033 The iRule ACCESS::enable no longer sends a TCP reset when used with portal access or SAML.
406036 APM now correctly handles Access Server TimeOut Exceededexceptions from the Oracle Access Manager SDK.
406130 This release fixes a rarely occurring TMM crash. Previously, TMM crashed when a user session was terminated while a form-based client-initiated SSO operation was in progress.
406382 An APM remote desktop, with Java client enabled in full screen mode, now gets keyboard input from a Mac OS X 10.8 client with Java 7.
407148 APM now works with ActiveSync on Windows Phone 8, Windows Phone 7, and Windows Runtime (RT) devices.
407327 The BIG-IP system now detects Internet Explorer in desktop mode on a Windows Phone 8 device as a Windows RT device (Windows 8 running on ARM processor).
407603 Possible XSS by cookie tampering on APM logout pages is fixed.
407833 When a report fails to run, the Configuration utility now displays a specific error and logs error exception details to the webui.log file even when it is configured in default logging mode.
407940 The Session Details report now runs without error.
408695 Split domain now works consistently with the HTTP 401 Response action.
408917 BIG-IP Edge Client for Mac no longer displays a captive portal when the XML response from the Mac system omits the doctype element.
409887 APM can now display up to 100 resources (maximum 20 characters length) on a webtop.
409998 You can now export SAML metadata from the Configuration utility without seeing this error: File(s) access/permission or signing key mismatch error. See log file.
410303 Users with Guest and Operator roles are now able to access OTP and email agents in the visual policy editor.
410338 After the server closes a transport TCP connection, APM now recovers the iSession control channel correctly.
410548 The SSO URL in the IdP Connector template, BIG-IP, is now correct; it is /saml/idp/profile/redirectorpost/sso.
410578 APM now replaces the authorization header, if one exists, with a header for Kerberos SSO.
410850 Client components of APM are no longer susceptible to the attacks described in CVE-2013-0169.
411107 Upload of large files using APM with HTTP Basic SSO no longer fails.
411792 If you use the iRule ACCESS::session data set with an invalid SID, TMM no longer crashes.
412041 Now PWS starts on Windows XP even when the browser uses a large amount of memory.
412084 The network access client now supports TLS1.2.
412146 HTTP 404 errors no longer occur for an APM virtual server with Citrix & Java Support enabled and the iRule ACCESS::restrict_irule_events disable.
412493 This release fixes a memory leak that occurred when APM cached many /vdesk/my.acl URIs for tunnel traffic.
413467 TMM now handles ACLs correctly.
413921 The rewrite plugin now correctly handles Visual Basic event handlers attached to HTML tags for HTML portal access resources.
414354 ACCESS no longer sends multiple HUDCTL_RESPONSE_DONE messages, so HTTP no longer logs many errors.
414475 A cross-site scripting vulnerability has been fixed.
415266 The password warning feature now works consistently during the first login attempt after an APD restart and on subsequent attempts. The correct message warns a user about password expiration.
419295 An ACCESS session can no longer be inadvertently shared by a Citrix Receiver that connects to different virtual servers on the same BIG-IP system.
416115 After detecting an IP address change, the BIG-IP Edge Client now resolves the host name during reconnection and initiates full reconnection.
416339 After an authorization failure, APM webgate redirect behavior is now similar to Oracle webgate redirect behavior and obssocookie is no longer reset to loggedoutcontinue.

Fixes in 11.3.0

ID Number Description
225705

UDP applications that use fixed port numbers now work over APM Network Access tunnel if you set the Preserve Source Port Strict option to All. You can find the option in Advanced Client Settings of Network Access Resource.

356241 APM now supports Java-based application tunnels on non-Windows endpoints.
360678 Previously, SMB traffic went directly even when network access was configured with the Force all traffic option. This now works correctly, so the previous workaround (SOL13086: SMB traffic may bypass VPN tunnel when split tunneling disabled) is no longer necessary.
367434 It is now possible to change the Active Directory password when IPv6 is used.
370053 When using customization and other upload and import operations, temporary files no longer accumulate in the /tmp directory.
371467 Previously, users could not log in after an HA Active node primary blade was rebooted on chassis systems or vCMP guests; this happened when the chassis systems or vCMP guests were configured to run on more than one blade. This problem no longer occurs.
379550 Unicode white space characters outside the ASCII range are now recognized as such in JavaScript. JavaScript containing these characters is now rewritten correctly.
380678 Citrix published applications are displayed with correct Webtop icons in Internet Explorer version 10.
381332 Single sign-on to Citrix StoreFront is properly supported now.
384115 Provisioning validation fails now when there is no disk for modules that require a disk.
384138 Description text is now removed from Citrix application folders on APM Webtop to match Web Interface look and feel.
384217 Fixed improper patching of SWF files with AS1/AS2 scripts when function/try/with/branch length is too close to maximum value.
384509 A Show Statistics While Connected setting is added to Common Webtop Settings in Customization Quick Start; valid values are on and off. This setting shows and hides statistics in the remote connection popup screen; it affects the application tunnel popup screen, in addition to the Network Access popup screen.
384937 Added session variable replacement support for the start_uri field of the AAA HTTP Auth agent.
385518 Strings that were not translated previously have been translated.
385918 A tmm panic/assert no longer occurs when running an access policy.
386051 This change makes it possible to display a simple popup screen for Network Access on a full webtop. You can choose the more simple popup screen through the customization menu.
386217 When you set the Access Policy Timeout value in an access profile to greater than the default of 300 seconds, it works correctly. Previously, user sessions expired after 300 seconds while waiting for user input on the logon page; the user logon would fail.
386277 Visual policy editor no longer times out when you edit complex policies that assign many resources.
386654 If the system shuts down unexpectedly, any changes that a Network Access client made to the registry are cleaned up now upon system startup.
387264 After an administrator changes the SSO configuration in an access policy multiple times, SSO stops working. This usually happens after using an SSO configuration with a longer name and then trying to use an SSO configuration with a shorter name. With this release, SSO continues to work after changing the SSO configuration.
388014 WEBSSO now works when you select a BASIC SSO configuration using the WEBSSO::select iRule command even in the following situation. The default configuration in the ACCESS profile (or resource) is FORM BASED and uses session variables (for example, in Hidden Form parameters).
388035 Multi-Stream ICA connections were targeted to the same primary CGP port on XenApp backends. Now each connection goes to the corresponding Multi-Stream ICA port configured by the administrator in XenApp policies.
388220 APM now supports XenDesktop at PNAgent mode.
388514 Previously, when accessing public folders on OWA2003 through Portal Access, you might see an error, Login Timeout failed with HTTP status code 440. The error occurred because backend cookies were not inserted. Now, the rewrite plugin inserts backend cookies correctly for this case and errors do not occur when accessing public folders on OWA 2003.
388860 The toolbar icon for Edge Client now displays properly on a MacBook with a Retina display.
389262 A crash occurred when looking up a property name beginning with 0 (zero). Portal access rewrite no longer crashes in this case.
389412 An APM out of license error no longer occurs when APM is under a high load and subject to additional circumstances, such as: users logging in and out frequently; APM failing over multiple times; services restarting on APM. 
389564 DNS SRV records are now redirected according to the Network Access split tunneling mask.
389258 An HTTP POST request hung due to its HTTP POST payload not being released from BIG-IP system to the backend HTTP server. This happened after the eam plugin received a TMEVT_RESPONSE event followed by TMEVT_INGRESS event. Now when the eam plugin receives TMEVT_RESPONSE and TMEVT_INGRESS events successively, the BIG-IP system sends the payload to the backend server, and the backend server reacts properly with a response.
389617 A file descriptor leak in APD that can result in APD consuming 100% CPU has been corrected.
389716 If you opened an SSO Forms Client-Initiated window and your session timed out before you entered data, a blank page was displayed and remained for some time. This no longer occurs.
391514 The system now handles the condition where the DNS Relay Proxy service fails to get the list of DNS servers on a particular machine.
392250 When Access Policy OAM Support is enabled on a virtual server and the AccessGate setting specifies a particular accessgate instead of Default, users are no longer intermittently redirected to an OAM error page.
392255 A double free issue in APM under high load has been corrected.
392481 Web application content processed by client-initiated form-based SSO is no longer truncated as would sometimes happen in the presence of client-side congestion.
392507 You can now copy and paste information from APM reports.
392886 Now an administrator can configure the machine certificate checker not to check the private key when User Account Control right elevation is required for this operation.
393941 The assertion, valid isession pcb, no longer occurs when application or optimized tunnels are terminated.
395179 You can now use Safari 6 to establish a network access connection even when the client or server has proxy configuration, rather than not using proxy at all after establishing NA connection.
395625 Google Chrome web browser (version 22 or higher) for MAC OS X has a problem loading the already installed inspection host and network access plugins. You might see a yellow error bar near the address bar that displays a message Plugin cannot be loaded. Upgrading to the new plugins does not work seamlessly.  To fix the problem, uninstall the old plugins. See Installing plug-ins for Google Chrome 22 on Mac OS X (after this table).
395754 From the Basic Customization view, the Network Access screen now displays and allows you to update customization values after upgrades from 10.x.y.
396213 A memory leak that happened when AD module made a query to get all domain groups has been fixed. 
396366 Prior to this release, it was possible to create an AAA AD server configuration from the CLI without supplying a domain name. This resulted in an incorrect configuration. The CLI now checks for a domain name.
397168 A Network Access connection can be established now even when the OS X system is localized to a language other than English.
397668 An OAM exception from the Oracle ASDK, that occurred when an invalid host name passed to the ObUserSession constructor, has been resolved.
397958 These logs (referer_log and agent_log) under the path /var/log/httpd/ are now being rotated periodically under the control of logrotate.
398007 In Network Access, tunnel cases with both TLS and DTLS, ICMP traffic would be dropped in some cases. This no longer occurs.
399212 Previously, you could save an advanced customization for an access profile stored in a partition, but not for one stored in a folder. Now you can save an advanced customization for an access profile in a partition or in a folder. 
399212 When using Advanced Customization, you can now save the Access Policy pages that you customize under Access Profiles. 
399411 PWS option Allow write access to USB flash drives is now applied to Windows Portable Devices.
401025 The F5 WebGate did not set the Expires header in the HTTP response for SSO logout URL. Due to this, the browser continued to use the old ObSSOCookie value, so a new user who logged in without closing the browser could access information for the previously logged in user. Now the F5 WebGate sets the Expires header and matches the behavior of the Oracle-fabricated WebGate when receiving an SSO logout URL.
401351 Epsec Package Versions are no longer lost after upgrade. 
401738 The BIG-IP system did not return a RADIUS attribute, state, in unmodified format with the second access-request. This has been corrected; the BIG-IP system now returns the state attribute in unmodified (and therefore, compliant) format.
402147 A regression that caused a missing RADIUS accounting stop message on session finish is resolved.
402741 Edge Client now cleans up on exit when a user logs off while Network Access is established.

Installing plug-ins for Google Chrome 22 on Mac OS X

Try these methods in the following order.

Safari method

Using the Safari browser, try connecting to the BIG-IP system to see whether the plugins upgrade seamlessly.

Note: This method is unlikely to work for 32-bit Safari running on 10.7+.

Manual plugin removal method

Try each of these steps until you succeed in removing the plugin:

  • In Spotlight, type f5 sam inspection host plugin.plugin and drag and drop the plugin that is found to the Trash.
  • Using terminal, go to the Internet Plugin-Ins directory using this command: cd "~/Library/Internet Plug-Ins" and remove the inspection host plugin directory rm -rf "f5 sam inspection host plugin.plugin
  • In Spotlight, type F5 SSL VPN Plugin.plugin and drag and drop the document that is found to the Trash. (To verify that it is a Plugin-in document before you drag it to the trash, mouse over the document to see whether its type is Plugin-in.)
  • Using terminal, go to the Internet Plugin-Ins directory using this command: cd "/Library/Internet Plug-Ins". Then remove the inspection host plugin directory using this command: sudo rm -rf "F5 SSL VPN Plugin.plugin"
Connect to the BIG-IP system now and follow the instructions it displays to install the new plugins.

Choosing a simpler Network Access popup method

  1. Create a full webtop.
  2. Assign the webtop in an access policy.
  3. Apply the access profile to a virtual server.
  4. Select Access Policy > Customization > Advanced .
  5. Select Branding.
  6. In the Webtop tree, locate the webtop from step 1.
  7. Select Full Webtop Popup Window Settings and verify that the Show Table Switch property appears.
  8. Select one of the following for the Show Table Switch setting: on (the NA popup screen displays a statistics table) or off (the NA popup screen is small and contains only a status indicator and a Disconnect button).

Fixes in 11.2.1

ID Number Description
360678 Previously, SMB traffic went directly even when network access was configured with the Force all traffic through tunnel option. The recommended workaround, "SOL13086: SMB traffic may bypass VPN tunnel when split tunneling disabled" is no longer necessary.
365453 APM Citrix proxy fully supports Wyse Xenith terminals now.
381332 Single sign-on to Citrix CloudGateway and Citrix StoreFront is supported correctly now.
384217 Improper patching of SWF files with AS1/AS2 scripts no longer occurs when function/try/with/branch length is too close to the maximum value.
384627 BIG-IP Edge Client no longer goes into a loop trying to update when auto-update information is missing.
385039 You can now delete an access policy with customized App Tunnel and Remote Desktop resources, including images.
385099 Terminal Server favorite setting "Enable persistent cache (bitmap caching)" functions properly now; when the setting is off, caching is disabled.
385193 To be compatible with the GateKeeper feature introduced in Mac OSX Mountain Lion (10.8), BIG-IP Edge Client components and installer packages for MacOSX are now signed with Developer ID certificate.
385918 A tmm panic/assert no longer occurs when running an access policy.
386046 A confusing message about the RAS subsystem was displayed when running self-diagnostics. The message has been corrected.
386342 Macintosh Network Access client now properly deallocates memory after routing table manipulation.
386654 If the system shuts down unexpectedly, any changes that a Network Access client made to the registry are cleaned up now upon system startup.
387264 After an administrator changed the SSO configuration in an access policy multiple times, SSO stopped working. This usually happened after using an SSO configuration with a longer name and then trying to use an SSO configuration with a shorter name. With this release, SSO continues to work after changing the SSO configuration.
387365 A defect that could cause APM access connection entries to extend beyond the timeout period and consume excessive memory has been corrected.
388023 This release fixes a rare case in which BIG-IP Edge Client would crash.
388242 If a customized localization string included a single quote, it was displayed as \' on a webtop. A single quote is now displayed correctly on a webtop when used in these settings:
  • Show and Hide Settings
  • These Form and Message Settings:
    • AppTunnels conflict with Network Access message
    • Network Access conflict with AppTunnels message
    • Initialization message
388514 Previously, when accessing public folders on Outlook Web Access 2003 through Portal Access, you might see an error, Login Timeout failed with HTTP status code 440. The error occurred because backend cookies were not inserted. Now, the rewrite plugin inserts backend cookies correctly for this case and errors no longer occur when accessing public folders on OWA2003.
388784 There was a conflict between Windows 2008 and MIT Kerberos interpretation of kvno field size. As a result, users could not sign on using APM Kerberos SSO when the BIG-IP system used a Read-Only Domain Controller as a KDC. The conflict is resolved.
388860 The toolbar icon for BIG-IP Edge Client now displays properly on a MacBook with a Retina display.
389258 An HTTP POST request did not complete because the related HTTP POST payload was not being released from BIG-IP system to the backend HTTP server. This happened after the eam plugin received a TMEVT_RESPONSE event followed by TMEVT_INGRESS event. Now when the eam plugin receives TMEVT_RESPONSE and TMEVT_INGRESS events successively, the BIG-IP system sends the payload to the backend server, and the backend server reacts properly with a response.
389262 A crash occurred when looking up a property name beginning with 0 (zero). Portal access rewrite no longer crashes in this case.
389412 Under high load and in deployments where users log in and log out frequently, if APM fails over multiple times, or if services are restarted on APM, APM might lose some license keys. Subsequently, APM might report an out of license error even though the max sessions are not established as per the license limit. The problem is resolved, so the out of license error no longer occurs.
389564 DNS SRV records are now redirected according to the Network Access split tunneling mask.
389617 A file descriptor leak in APD, which can result in APD consuming 100% CPU, no longer exists.
389716 If you opened an SSO Forms Client-Initiated window and your session timed out before you entered data, a blank page was displayed and remained for some time. This no longer occurs.
391514 The system now handles the condition where the DNS Relay Proxy service fails to get the list of DNS servers on a particular machine.
391517 Some icons for Citrix published applications were not rendered correctly on a webtop; the default icon was used instead of an application-specific icon. Now the icons are rendered correctly on a webtop.
392699 The TMM crash associated with this log entry: Assertion "Access pcb policy result is unknown." failed. no longer occurs.
392745 BIG-IP Edge Client customizations (for example, banner color and logo) for Chinese languages are now applied correctly.

Fixes in 11.2.0

ID Number Description
226524 Active Directory forest mode was not supported in earlier versions. Starting in this release, APM supports the cross-domain option for AD Query and AD Auth agents.
354486 Previously, a Mac Edge Client did not automatically try to reestablish a connection if the Tunnel Server (svpn) was still alive from the previous connection; instead, this status was displayed: Error: VPN disconnected. This issue has been resolved.
358874 Previously, APM did not inform the user about the Active Directory password policy at logon. We have implemented Active Directory password policy check in this release.
365344 The Linux command line client now supports PEM and PKCS12 client certificates.
367511 An AAA configuration using the LDAPS protocol did not negotiate SSL. Previously, you needed to use a layered virtual server with an SSL profile to work around this problem. You no longer need to use the workaround.
368210 In versions 11.0, an iRule that was present in version 10.2.x was replaced with a Remote Desktop profile. During upgrade from version 10.2.x to version 11.x, the configuration failed to load, displaying the error message Virtual server /Common/citrix_vs references rule _sys_APM_Citrix which does not exist. We have resolved this issue.
369151 In earlier versions, after an upgrade, configuration reload failed if duplicate resource names existed. We have resolved this issue as follows: It is no longer possible to create APM webtop links and connectivity resources with the same names.
369657 In earlier versions, help was missing for the confirmation window that was displayed when you deleted an access policy. Help now displays correctly.
369714 Previously, the Advanced Customization Editor did not work with multi-byte character sets. Now it does.
370336 Performance has been improved for creating and updating custom reports.
371046 Active Directory authentication now works with IPv6 as expected.
371577 Server-initiated connections to VPN tunnel clients frequently failed after the client's VPN tunnel dropped and reconnected on a system running in CMP mode. This issue has been resolved.
371691 APM no longer depends on reverse DNS records to resolve the fully qualified domain name (FQDN) of the domain controller. Instead, APM uses LDAP protocol to retrieve the ldapHostName attribute from domain rootDSE and uses reverse DNS only as a fallback.
371692 This version introduces native HA functionality in APM. (In addition, APM still supports HA using a layered virtual server.) Native HA works as follows: If only a domain name is specified for an AAA Active Directory server object, APM discovers a list of domain controllers (DCs) for that domain using DNS SRV request. After that, APM tries to use the DCs in the list for AD Auth (or AD Query). If AD Auth (or AD Query) fails due to a connectivity issue, APM marks that DC as unavailable for 10 minutes and tries the next one.
371854 Previously, when the rewrite plugin sent a list of application cookies to the backend server using the Cookie: header, it appended a semicolon to the value of the last cookie; this broke compliance with RFC2109. Now, the value of the last cookie does not include a trailing semicolon.
371959 Previously, a database error occurred when running a report that returned a large amount of data (over a million records). Now when you run reports, you can specify a time range or accept a default value (the most recent 8 hours). The timeout value has also been increased.
371989 Previously, when running custom reports, pagination was not enabled. For large reports, this caused the Configuration utility to be slow. This issue has been resolved.
372034 Previously, if a domain controller was specified using an IPv6 address, AD Query reported as successful without running in the access policy. This issue has been resolved. It is no longer necessary to work around this problem.
372060 Previously, the Timeout popup window in French and Spanish locales would display a JavaScript error. The error was due to extra spaces in a parameter that prevented the proper loading of subsequent pages. Pages now load correctly, and the error does not occur.
372092 Due to a known problem with cookie support in the Linux Citrix Receiver client 12.0, every request made to APM started a new session. This issue has been resolved.
372494 It is no longer necessary to use a layered virtual server to use IPv6 addresses with Active Directory or LDAP. Now, you can specify Active Directory and LDAP AAA servers using IPv6 addresses. AD Auth, AD Query, LDAP Auth, and LDAP Query now work with IPv6 addresses as expected.
373668 Previously, you could not copy an access policy if the name (including the partition) exceeded 62 characters. Now when you copy such an access policy, the name of the copy is truncated: characters in the middle of the name are removed.
373825 When you include a dot (".") in an access profile name, authentication works correctly now.
373830 The current active sessions statistic in the access profile no longer underflows, showing unreasonably large values.
373831 The current pending sessions statistic in the access profile no longer underflows, showing unreasonably large values.
374531 Previously, dynamic ACL generated an incorrect IPv4 netmask during the parsing of an ACL entry. In certain cases, the order of bits in an octet were reversed, and dynamic ACL presented an error message for a correct ACL entry. For example {allow tcp any 172.31.0.0/25} and {allow tcp any 172.31.0.128/25 } are both correct ACL entries, but dynamic ACL would give an error message for the latter entry. This issue has been resolved.
374953 Previously, you could not start Citrix applications configured with custom encryption from an APM dynamic webtop. Now, APM supports custom encryption settings on a per application basis.
375263 In previous versions, if you enabled the Server-Side SSL setting for a Remote Desktop resource of the Citrix terminal type, the setting was not saved. This issue has been resolved.
375495 Previously, iSession socket connections through the BIG-IP APM system were not reused. We have added connection reuse capability, which should improve data latency.
376115 Previously, on Windows 7 clients with more than one network interface running Internet Explorer 8 in protected mode, the APM client caused memory allocation failures, resulting in an Internet Explorer crash. This issue has been resolved.
376556 Exchange support system iRule did not comply with RFC 2617 with respect to non case-sensitivity for handling the HTTP Authorization Basic header. Although it is extremely rare, a particular Exchange client might send the credential using a different case; for example, sending "basic", instead of "Basic". Previously when this happened, the system iRule failed to extract the credentials and rejected the request. This issue has been resolved.
377853 To ensure that SSO works for Active Directory whether cross-domain support is enabled or not, a new session variable is registered: session.ad.agent_name.actualdomain . This variable contains the user domain to which the user successfully authenticated.
378362 Access policy branches that originate from macrocalls are followed correctly now.
378926 With the behavior change introduced in ACCESS hudfilter for 11.1.0 release on handling clientless-mode header, the existing iRule code did not work properly with this new functionality. Due to this, the OutlookAnywhere system iRule did not work. This issue has been resolved.
378991 Previously, a user name that contained special characters might be logged incorrectly. This issue has been resolved.
379413 ActiveSync clients were detected incorrectly as Windows NT Internet Explorer 7. It is no longer necessary to rely on properties other than client type to detect an ActiveSync client; the issue has been resolved.
380725 Previously with Windows Phone, reverse-proxy was unable recognize a Windows object. For example, when a Windows Mobile 7.x device connected to an APM full webtop and started a Portal Access favorite, the URL request was not rewritten and therefore did not take the user to APM for connection. This issue has been resolved.
380838 We have introduced a database variable to allow the administrator to disable LDAP DN/Filter escape in LDAP/AD Query agent in case the administrator wants to prepare the DN/Filter escape in advance.
381118 TMM no longer restarts with a SIGSEGV when running ACCESS::session exists iRule commands in ACCESS_SESSION_CLOSED events.
383008 The Msxml2.XMLHTTP.6.0 object was not supported in web applications. Now it is supported.
383201 Previously, WebSSO crashed when receiving a response without headers from a server. This no longer happens.
383708 Previously, VBscript (contained within a vbscript script tag or referenced externally, using the src attribute) was treated as JavaScript. Therefore, content was not patched correctly. This issue has been resolved.
385786 After integrating APM with Oracle Access Manager (OAM) so that APM acts as an OAM 10g webgate, an HTTP post request against OAM protected resources would fail. This issue has been resolved.

Fixes in 11.1.0

ID Number Description
248018, 354427 Now, multiple Network Access resources can be assigned to a user session at one time, and displayed on the dynamic webtop. A user can only start one Network Access session, however.
307017 Network Access tunnels running on Mac now use the client system's proxy settings.
350161 Upon exit, protected workspace now attempts to clean up the system paging file and RAM to prevent information leaks.
353010 APM session cookies now support the HttpOnly attribute for certain security settings. This attribute is supported in LTM+APM mode, and cannot be used with client-side endpoint checks.
355549 Previously the SSO credential mapping agent added unnecessary braces { } around the expression. Now these braces are not added.
360374 Mac OS X 10.7 is now supported for Network Access connections.
360442 Network Access now supports two-factor authentication with Windows Logon Integration. This feature added two options for the Network Access client: Enable Full Pre-logon Sequence and Reuse Winlogon Session.
363034 The Z parameter in the /myvpn request on iOS, Mac and Linux clients previously required a special iRule. Now the Z parameter is supported without an iRule.
363724 Previously in access policies, the logging agent had to be configured explicitly with "session.client.unique_id. Now, the logging agent "session.client.*" can be configured with the wildcard asterisk, to allow logging of all UUIDs.
364684 An issue with logout URIs building up on the system was fixed.
364853 The webtop-type last is no longer listed as a supported option in the command line interface.
364936 Previously, in some circumstances the Logon Page action could not be customized in the Visual Policy Editor. This is now fixed.
365096 ACCESS_POLICY_AGENT_EVENT now probperly starts in clientless mode.
365175 Import of access policies that include objects that were created in the non-common partition now succeeds.
365347 After the BIG-IP box restarted, in some circumstances, users could not establish new sessions and received TCP RST messages. In /var/log/apm, the following error appeared: Access policy configuration version: configuration-id in use by user session was not found. This issue is now fixed.
365349 Previously, if an app tunnel was configured with multiple addresses to the same destination but different ports, and the DNS Relay Proxy was not enabled, only the first address/port combination would be reachable. This was corrected by enabling the DNS Relay automatically.
365597 Previously, custom reports with a very large database could consume up to 40% of the CPU. This issue has been fixed.
365662 In the Customization tool preview page, macro ending page nodes, which cannot be previewed, have been removed from the preview tree nodes.
365882 The Installer control setup file that controls all installable components was previously unsigned and caused warning messages on some systems. The setup file is now signed by F5.
365948 In a protected workspace session, if a webtop was configured with the Minimize to tray option enabled, the webtop was correctly minimized to the system tray, but if the user restored it from the system tray by double clicking, the protected workspace session closed. This has been fixed.
366190 Access policy inactivity timeouts sometimes failed in a previous version, when the Cache and Session Control action was enabled. Access policy inactivity timeouts now work properly.
367070 When an access policy manager session was stopped by the system administrator or expired, the Citrix Receiver attempted to reconnect until the window was closed by the user. This has been fixed.
367512 The administrator is no longer prompted to select the SSL server profile when configuring an LDAP server in direct mode.
367726 Citrix applications can now be started from the dynamic webtop on Internet Explorer 9.
367850 Previously, the Network Access status window remained active after a session was terminated by the administrator, or expired due to timeout. This has been fixed.
368488 All roles above operator can now manage sessions.
369248 The network access web client now supports proxy autoconfig (PAC) scripts located on HTTP or HTTPS servers, in addition to locally stored PAC files.
369407 In a previous release, access policies created using the Access Policy Manager wizards did not allow the choice of the dynamic webtop, and labeled the Full Resource Assign action incorrectly. These issues have been fixed.

Fixes in 11.0.0

The current release includes the fixes and enhancements from previous releases and the fixes that were distributed in SOL12729: Overview of BIG-IP version 10.2.1 HF1, SOL12778: Overview of BIG-IP version 10.2.1 HF2, and SOL12816: Overview of BIG-IP version 10.2.1 HF3.

ID Number Description
225512 Previously, Access Policy Manager clients that started network access tunnels that ended up on different Traffic Management Microkernels (TMMs) could not communicate. Now, such clients can communicate.
225870 Previously, a rare condition could cause a crash in the system when APM tried to connect or reconnect a network access tunnel. We have corrected this.
226423 Previously, Access Policy Manager's active sessions graph erroneously reported a maximum value when active sessions existed and a failover event occurred. Now, this issue no longer occurs.
336284 Previously, network access tunnels on a system that failed over could not restart after the failover because the lease pool was not created. Now the lease pool is created and network access tunnels fail over correctly.
339171 Previously, when an administrator created a AAA server with the web interface, some legal characters could not be used in the AAA server name. Now the name field accepts all legal characters.
339951 Previously, Access Policy Manager HTTP 404 Not Found errors could not be configured. Now, the message for these errors is configurable as part of the logout group.
341377 The following new iRule commands have been introduced to allow the use of multiple SSO profiles and make them selectable based on user-defined criteria:
  • WEBSSO::enable
  • WEBSSO::disable
  • WEBSSO::select sso_profile_name
You can use these iRule commands in the following event contexts: ACCESS_ACL_ALLOWED, HTTP_REQUEST, HTTP_REQUEST_DATA. More information is available on F5 DevCentral.
344713 Previously, WebSSO crashed when the HTTP header dictionary was invalidated and refreshed. Now this no longer occurs.
346047 Previously, the documentation for portal access described a patching method (No patching) that is no longer supported. The patching method is no longer described.
347568 In portal access, JavaScript rewriting has been enhanced to better handle SVG elements.
348742 Previously, the Client OS action in Access Policy Manager did not support Microsoft Internet Explorer 9. The Client OS action now supports clients identifying themselves as Internet Explorer 9.
349490 Previously, when you configured an access policy using HTTP form-based authentication, the username and password were sent to the authentication server in POST variables, even if a username and password were not specified in the server configuration, resulting in authentication failures. Now the username and password are sent only when specified.
351757 In a previous release, when the admin configured client power management settings in Network Access network properties, those power management settings were ignored by Windows Vista and Windows 7 clients. Now, Windows Vista and Windows 7 clients use the Network Access power management settings.
351895 Previously, when you created multiple Active Directory AAA servers, or changed the realm on multiple Active Directory server, several default_realm entries were erroneously added to the /etc/krb5.conf configuration file, causing authentication errors. Now, only one default_realm entry is added to the configuration file.
354748 Previously, when you configured portal access for a backend server with the same host name as the Access Policy Manager virtual server, portal access failed to rewrite some links. Now, portal access rewrites links correctly when the backend web server has the same host name as the virtual server.
358873 Previously, when a Portal Access connection was made to an SAP Netweaver backend server, some JavaScript Function() calls were not correctly handled, resulting in errors on the client. Now, NetWeaver JavaScript functions are handled correctly by Portal Access.
359330 Previously, when you configured an Access Policy Manager LTM Access connection with at least one pool member, and source IP persistence or persistent cookies enabled, some connection errors occurred with certain web servers. Now, this configuration works correctly.
359530 Previously, when a user accessed a SharePoint 2007 site through portal access, the rewrite engine used the wrong parser to patch some URLs incorrectly, causing connection errors and failures. Now, the rewrite engine for SharePoint 2007 sites uses the correct parser.
365107 Previously, when the Access Policy Manager received an HTTP 100 continue response from a backend server, the system could fail or experience instability. The system no longer fails or becomes unstable in this scenario.

Usability

Session ID rotation has been implemented, and starting from 11.2.0, it is on by default. This breaks compatibility with earlier BIG-IP Edge Client and plugin versions. For example, when APM is configured for session ID rotation, an 11.1.0 Edge client is not allowed to log in to Access Policy Manager (APM) version 11.2.x. The expected behavior in this case is for APM to present the login page to the Edge client after each login attempt. To disable session ID rotation per-box, you can use the following tmsh command: tmsh modify sys db apm.rotatesessionid value disable

Behavior changes in 11.4.0

ID number Description
389330 Access Policy Manager (APM) no longer supports the Windows Mobile client.
391351 With new access profiles and access policies that include logon page and authentication actions, there is a random delay in error response to a user when authentication fails. By default, the delay is between two and five seconds. You can change these values in access profile settings. To disable this behavior, set the minimum and maximum authentication failure delay value settings to 0 (zero) in the access profile.
413019 When you use the GUI to upload a Windows Group Policy file, the file is now stored as hosted content in a user-windows-group-policy area. When you a add or edit a Windows Group Policy action, you must select a policy from a list. The entries on the list include the partition name and the hosted content area name; for example,/Common/user-windows-group-policy/group1.
413173 In this release, APM introduces hosted content; you can upload custom files to APM and then provide resources directly to users. The user interface for managing Citrix bundles remains the same. However, now if you upload a Windows package file (Citrix client package), APM treats it as a hosted content file.
Note: APM has strict rules for hosted content files and, consequently, you cannot use a Windows package file with the same file name for two different Citrix client bundles.

Known issues

This release contains the following known issues.

Upgrade issues

ID number Description
417711 After the upgrade, if the previous configuration used NTLM front end authentication, the functionality is not restored. After the upgrade, manually delete the existing machine account configurations and recreate them again.
421456 Kerberos SSO does not work after upgrading from 11.3.0 to 11.4.0, because in 11.4.0 the password is saved in encrypted form while the password in 11.3.0 is saved as clear text. Re-enter Kerberos SSO password after upgrade to 11.4.0.
432900 APM upgrades fail if the /shared/apm directory is not present before you load the configuration. APM writes a configuration loading error to the /var/log/ltm file with content similar to this: Oct 25 08:42:11 localhost notice mcpd[6311]: 0107165d:5: copy_file: EPSEC::In copy_file - src (/config/filestore/files_d/Common_d/epsec_package_d/:Common:EPSEC:Images:epsec-1.0.0-160.0.iso_14866_1) dst (/shared/apm/images/epsec-1.0.0-160.0.iso) Oct 25 08:42:11 localhost notice mcpd[6311]: 0107165d:5: copy_file: Failed in file copy errno=(No such file or directory) .... 01071558:3: EPSEC - File Copy to /shared location failed Unexpected Error: Loading configuration process failed. To work around the problem, create the directory /shared/apm and try to load the configuration again.

Portal access issues

ID number Description
223712 During a web applications session, when a user logs out of Microsoft Office Communicator and then attempts to log on again, the logon request fails.
340549 The rewrite plugin does not implement forwarding HTTPS requests through the HTTPS proxy correctly. (However, forwarding HTTP requests through the HTTP proxy does work correctly.) Create a layered virtual to catch HTTPS traffic leaving APM and forward it to a HTTPS proxy server using CONNECT. Proxy authentication is not implemented and if response status from HTTPS proxy server is not 200, then use an iRule to close the connection.
343280 When using portal access in Safari 5.X, sometimes web pages do not load properly. A bug in Safari 5.X leads to accidental loss of all HTMLElement.prototype changes when setting HTMLElement.prototype properties in a window and accessing window.frameElement from any of its frames. (The problem also sometimes occurs in other less well-defined cases.)
347100 Every time the Hometab loads, a dialog box message is displayed stating: "This Page contains both secure and nonsecure items. Do you want to continue?" To work around this problem, disable the Hometab.
384405 With Access Policy Manager Portal Access, if you add a web-acceleration profile to the Local Traffic Virtual, it does not take effect until the you go to the command line and type "bigstart restart tmm". The web-acceleration profile is important to Portal Access performance, so this step is necessary to ensure caching occurs for Portal Access content.
404899 Webpage errors occur when opening a chat window in IBM Lotus iNotes 8.5 with Sametime through a portal access webtop. This happens only when using Internet Explorer 9. To work around this problem, add a portal access item with the path "/sametime/stlinks/*" to the portal access resource and disable Home Tab for this item.
406040 If an application uses a non-standard location for favicons (as permitted by the LINK meta tag) and you use Internet Explorer 10 for access to the application, then the BIG-IP system creates a new session for that URI. If you use Google Chrome version 25 or above, the BIG-IP system closes the current session during fetching favicons from the non-standard location. Related change in Google Chrome: https://code.google.com/p/chromium/issues/detail?id=114082 "An example of an iRule workaround is as follows: when HTTP_REQUEST { if { [string tolower [HTTP::path]] ends_with "favicon.ico" and [HTTP::cookie "MRHSession"] eq "" } { ACCESS::disable } }"
426963 When the client sends an HTTP post with an expect 100-continue, APM will fail to forward it to the backend server. "when HTTP_REQUEST { if {([HTTP::method] eq "POST") && [HTTP::header exists "Expect"] } { HTTP::header remove "Expect" SSL::respond "HTTP/1.1 100 Continue\r\n\r\n" } }"
439965 BIG-IP APM currently cannot handle multiple browser tabs trying to create sessions at the same time. The most common example is saving multiple homepages in a web browser. When the web browser opens, requests from these tabs are sent within milliseconds. This can cause very unpredictable behavior where sometimes it will function correctly, and other times there will be connection resets ir the user will see error pages. If the user is already authenticated and has a session, then multiple tabs can be opened. However, there is no workaround for session creation.
442528 Demangle filter crashes with a SIGBUF. To work around the problem, add this code to the iRule: when HTTP_REQUEST { log local0. "Refer length is [string length [HTTP::header Referer] ]" if { [string length [HTTP::header Referer] ] >4000 } { HTTP::header remove Referer } }

Client issues

ID Number Description
223583 Inside PWS on Windows Vista, a user can create folders only in some locations using the context menu; that is, only a "Folder" item appears on the "New" menu. However, a user can create standard type files using the context menu directly on the desktop and in the user's home folder. Files can be created on the Desktop and then moved to the desired location.
294032 When you access an older version of APM software using the Windows system client and a pre-logon antivirus check is configured, the OPSWAT AV control gets loaded into your browser. The control does not unload successfully and, as a result, the antivirus check fails. You cannot log on until the control is unloaded. Reboot the client system.
339865 Microsoft SharePoint 2007 with Office Integration does not work in LTM+APM mode when Protected Workspace is used in an access policy. When you try to open a Microsoft Office document, an alert about a wrong URL is displayed.
354360 Sometimes a BIG-IP Edge Client for Mac Edge displays a Bad URL error after you click the Connect button. This error might repeat a few times before you successfully connect. To avoid this, click the Disconnect button and then click the Connect button again.
362325 Links in content are rewritten in HTML attachments from Outlook Web Access (OWA) after you open the attachments in the browser or save them to disk using the Save as action. This happens because APM application access patches the links in HTML attachments. This occurs with OWA 2003, 2007, and 2010.
369887 On a Mac system when Japanese language is selected during client component installation, you might see symbols that look like gibberish or strange characters, such as amp;nbsp; (observed on Firefox) To work around the gibberish symbols, change the default language to English during the installation, then switch back to Japanese and enforce utf-8 on the browser level. To work around the problem of strange characters, you can select Access Policy Customization and select the Localization tab; then select Access Profiles, expand the name of an access profile, select Framework installation, and change the text for the desired installation option."
393043 During an APM remote connection, the progress bar might not render correctly on a Linux system when using the Chrome browser.
399552 CD/DVD burning through SPTI inside PWS works even though the policy disallows it.
404890 This is a rare issue that happens for Internet Explorer when pop-up screens are set to be blocked by browser. When you launch a Java app-tunnel for the first time in Internet Explorer, the message "Allow pop-ups for this site?" is displayed. In rare cases, when you click Allow once, the Java app-tunnel freezes in the Initializing state and cannot be used. To work around the problem, add a virtual server to the allowed sites for pop-ups from Tools >Internet options in Internet Explorer.
408851 Some Java applications do not work through the BIG-IP server.
420550 WYSE client cannot launch any application if the APM session expired.
421577 Messages are logged from VMware View to /var/log/apm. However, you cannot enable debug logging for VMware View in APM using the Configuration utility. To enable debugging, you must go to the command line on the BIG-IP system and type one of these sets of commands: /usr/libexec/bigpipe db log.accesscontrol.level Debug /usr/libexec/bigpipe db log.vdi.level Debug or tmsh modify sys db log.accesscontrol.level value Debug tmsh modify sys db log.vdi.level value Debug When you are done debugging, type the commands again but substitute "Notice" for "Debug" to restore logging to the correct level."
424368 A statement such as: parent.document.write(some_html_with_script) hangs up the parent frame for Internet Explorer browsers
424936 An extra line (that consists of "<?") appears at the top of the apm_mobile_ppc.css file and causes an error like this one: Jul 9 08:37:10 roeislfl4gm err httpd_sam[13917]: [error] [client 127.1.1.4] PHP Parse error: syntax error, unexpected '&amp;lt;' in /var/sam/www/php_include/webtop/renderer/customization/general_ui/Common/tmsproext-apm_general_ui/en/apm_mobile_ppc.css on line 2" To work around the problem, remove the extra line ("<?") from var/sam/www/php_include/webtop/renderer/customization/general_ui/Common/tmsproext-apm_general_ui/en/apm_mobile_ppc.css.
431337 The LinkedIn button is a part of the new feature, Apps in Outlook Web App, in Outlook Web App 2013. A JavaScript error occurs if you click the LinkedIn button in Outlook Web App 2013 while using Internet Explorer 11.
432020 By default, Internet Explorer 11 starts with Enhanced Protected Mode enabled and the browser process runs inside AppContainer. Enhanced Protected Mode (AppContainer technology) in Internet Explorer 11 prevents the interception of connection requests. As a result APM App tunnels cannot redirect traffic to a proxy running on the loopback address. To work around the problem, you have 2 options to choose from: 1. Disable Enhanced Protected Mode in Internet Explorer 11 and 2. Add the backend server to the Trusted or Intranet Sites List.
431375 Citrix Receiver for HTML5 v. 1.1 does not work with Internet Explorer 11.
432515 The external logon page does not post the 'Action required' pop-up dialog box of BIG-IP Edge Client. To workaround this issue, you must inject the following Javascript code into the External Logon page: <body onload="OnLoad()"*gt; ... <script language="javascript"> function OnLoad() { try{ if ( "undefined" != typeof(window.external) && "unknown" != typeof(window.external) && "undefined" != typeof(window.external.WebLogonNotifyUser) && "unknown" != typeof(window.external.WebLogonNotifyUser) ){ window.external.WebLogonNotifyUser(); } }catch(e){alert(e)}; } </script>
433752 If a web application edits event handlers dynamically, the event handlers might become corrupted.
433972 When you access SharePoint 2013 through APM and use a rewrite profile, the rewritten New Event dialog box is shifted to the left and action widgets are not displayed above the Description field.
434831 When the client connects to APM (with Safari) and launches the Application Tunnel, the tunnel will be created, but the application configured to launch will not. There is no error, only indication is that application is not started by the Application Tunnel. To work around the problem: 1. Use Firefox browser. 2. Disable Safe mode for required host through following: Safari preferences >Security Tab... >Manage Website Settings... >Choose "Java" on left panel >Choose "Run in Unsafe mode" for required host.
436933 Auto logon does not work for APM remote desktop resources.
439463 Citrix Receiver for MAC OS and iOS may get an incorrect config.xml file when working through a Wi-FI router and APM integrated with Citrix WI.
439887 Drag-and-drop and some other mouse operations work incorrectly in Outlook Web App (OWA) 2010 if accessed using APM portal access from the Chrome v.31.x browser.
440375 Under the Built-in Administrator account inside Protected Workspace, a VPN connection cannot be established if VPN components are not installed already. Install VPN components before Protected Workspace on an account other than Built-in Administrator.
440380 Citrix Receiver for iOS may fail to connect throught APM in integration mode when ICA file generated by backend is missing the following properties: DoNotUseDefaultCSL=On, HTTPBrowserAddress=!, LocHttpBrowserAddress=!
442393 A Citrix session stays active after the user logs out from an APM webtop. The user then cannot reconnect to his apps. Clear browser cache before logging out from APM webtop
444767 Access to Office365 Outlook Web Access services using portal access is broken for HTML5-supported browsers. The user is redirected to the APM Logout page after successfully logging in to Office365. iRule below disables OWA offline-caching support.
477090 The View Connections Server Settings for a VMware Horizon View server include Blast Secure Gateway settings. To be able to launch VMware View sessions from an APM webtop using an HTML5 client, ensure that the check box, Use Blast Secure Gateway for HTML access, is cleared.
477841 On OS X 10.10 systems, Safari 8 does not use Network Access proxy settings that are applied to the system. A user can launch Network Access proxies on other browsers, excluding Safari 8.
483113 On OS X 10.10 systems, when a user displays a list of servers, white squares appear next to each server name in the list. The Remove Server icon that displays to the right of each server name also displays a white background.
480247 On OS X 10.10 systems, BIG-IP Edge Client sometimes creates a config.f5c file in the Edge Client application folder that causes the user to see an error.
483107 On OS X 10.10 systems, the BIG-IP Edge Client icon is highlighted if the user taps the icon. The highlight does not disappear until the user exits BIG-IP Edge Client.
477843 On OS X 10.10 systems, BIG-IP Edge Client displays the throughput as black text on the black menu bar. A user finds it difficult to read the text.
483379 On OS X 10.10 systems, tapping on the F5 menu icon causes high CPU consumption.
479242 On OS X 10.10 systems, Network Access does not work with modes such as Split Tunneling or Force all traffic. After a connection is established, the connection routes are not set to a MAC address route table.
480595 On OS X 10.10 systems, when a user taps Calender > New Event, the New Event page displays an empty page.
480592 On OS X 10.10 systems, the Send button on the New Message menu does not work.
505010 Patch management checker checks for "Apple software update" on Mac which requires admin privilege to check the number of missing patches. Even when the user is logged in as admin, this check does not pass because BIG-IP Edge Client does not support privilege escalation for endpoint inspections currently.

Network access

ID number Description
342035 SIP client cannot communicate with SIP server when connecting over Network Access tunnel. SIP protocol uses fixed UDP ports, and communication fails because Network Access tunnel translates the source port of the connection. Configure a layered virtual server using the SIP UDP port and set the Source Port option to Preserve Strict.
351360 Sometimes when assigning different route domains to Network Access clients connecting to the same virtual server or using the same connectivity profile, traffic from the client can go out into the network associated with the wrong route domain. This could happen when two clients are assigned the same IP address (from different lease pools containing the same address ranges) and different route domains and try to access the same IP address on the internal network using the same TCP/IP protocol. To work around this problem, when sharing IP address ranges among route domains, use separate virtual servers for each route domain, with different connectivity profiles.
356419 On Linux, PPP routes might be lost if network access is configured with the allow local subnet option enabled. This behavior is rare. To work around the problem, disconnect from the server using the "f5fpc -o" command and then reconnect to the server.
356766 Removing or updating Network Access device or client components while the system has an active Network Access connection might cause the system to drop the existing connection and fail to establish a new connection until after a system reboot.
364061 On a Linux client, the network access Show log file link does not display the log file unless gedit is installed. To work around this problem, install gedit on the Linux client.
373889 You can configure a network access tunnel to update a session (that is, to extend expiration time) based on a traffic threshold and a window of time. Traffic measurements are taken every 5 seconds, but they are not divided by 5 before being used in the calculation. As a result, instead of bytes per second, bytes per 5 seconds is calculated, which is incorrect. To work around this, select the network access resource you want to update, then select Network Settings and Advanced from General Settings. Proceed as follows: 1) Set Session Update Threshold to 5 times the desired bytes/second rate 2) Set Session Update Window to 2 or higher Note: The session life management might not be exact.
383607 After a network access client loses connectivity and reconnects with another IP address, the client cannot open tunnels to optimized hosts for 4 to 7 minutes.
398339 When you use the Fedora OS with SELinux enabled and use the Firefox web browser to connect to APM for network access, you might get SELinux blocking notifications. A. Execute the following command on terminal as root user (not sudo) 1. setsebool -P mozilla_plugin_enable_homedirs on 2. setsebool -P unconfined_mozilla_plugin_transition 0 B. Restart Firefox and try connecting to the APM server again.
423717 When the client connects to APM (with Safari) and the components need to be installed (first visit) or upgraded, APM runs a Java Applet to install the packages. The applet is loaded and runs, but the Installer is not able to run. Safari will state that the installation has failed and for user to manually install the plugin(s). There are two workarounds: 1. Use Mozilla Firefox or Google Chrome to install/upgrade components and go back to using Safari. 2. Safari: Try to connect to BIG-IP Edge gateway and install F5 plug-ins. If it fails, open Safari >preferences >Security >Manage website Settings; then click Java on the left column. On the right column you will see the BIG-IP Edge Gateway URL. Select "Run in Unsafe Mode" from the drop-down list in front of the BIG-IP Edge Gateway URL. Connect to BIG-IP Edge Gateway again.
433535 DTLS renegotiation stops after one try.
435182 DNS queries when connected to the APM Network Access tunnel (VPN) will not resolve correctly. The DNS server specified for the VPN will not be used. To work around: In Google Chrome, do the following: 1. Open a new tab 2. Type: chrome://flags/ 3. Find Built-in Asynchronous DNS Mac, Windows, Linux, Chrome OS setting 4. Set to Disable.
435542 In some cases re-installation of the VPN driver on Windows 8.1 requires a system reboot. Without reboot the user can be presented with this error: "The modem (or other connecting device) is already in use or is not configured properly."
438056 The APM network access client for Windows systems can fail to establish a VPN connection if the client SSL profile is configured with the options no-tls or sslv3 and the BIG-IP system selects an AES cipher. Windows Schannel API does not consider AES as a valid cipher for an SSLv3-only connection and can reject the connection to the BIG-IP system. If you restrict client SSL to SSLv3-only you might need to exclude AES ciphers (defined in RFC3268) by adding ':!AES' to the 'ciphers' option in the client-ssl profile to work around compatibility issues with Windows clients: for example ltm profile client-ssl clientssl_ssl3_only { ... ciphers SSLv3:!AES ... }

Admin issues

ID number Description
224145 The visual policy editor can, on rare occasions, return a non-specific failure when attempting to create new items. The failure is transient; the request invariably succeeds on retry. The failure is transient; the request invariably succeeds on retry.
359639 Some long captions for resources can be longer than the bounding box in Firefox 7. This problem does not affect the workflow.
360141 Modifying the SSO configuration does not cause the Apply Access Policy button to show up on the Admin GUI or the visual policy editor. The configuration change takes effect immediately for new sessions established after the change. Old sessions (those that were already created before the configuration change) continue to use the old SSO configuration.
360734 When previewing pages, the Preview pane does not automatically refresh when the language is switched. Click on an item in the Preview tree pane to cause the page to refresh in the new language.
360742 When the logon page is customized in VPE in multiple languages, the images appear broken. To work around the problem, customize the logon page using localization customization. (Refer to Access Policy >Customization.)
362200 When customizing messages, you cannot use special characters, such as ', ", &, <
362351 Branch names cannot start with the word fallback in the visual policy editor. Do not start branch names with the word "fallback". The terminal name must begin with an alphabetic character (for example, a or A). The remainder of the name can contain only alphanumeric characters (numbers and letters), spaces, and these symbols ( + - _ ( ) [ ] ). The terminal name cannot begin with the text fallback. Please rename the terminal.
363188 Using a space in an alias for a virtual server can cause unexpected results when you use tmsh to add or update a connectivity profile. No spaces are allowed in aliases for virtual server.
371015 On chassis platforms, in some scenarios, more than one value is displayed under the 'Local Time' column in the 'All Sessions' report.
383464 In reports, names that contain a single quote are displayed in hex-encoded format. For example, the name O'Brian might be displayed as O%27Brian.
384490 In advanced customization, when an access policy uses an image that includes spaces in its name, problems can occur. It can be impossible to export the access policy. Problems with upgrade can also occur. Rename the image without spaces, upload the renamed image, and change customization to support the new named image instead of the old one.
398361 Not all configuration objects validate and reject an object name that contains the space character. As a best practice, when you create a configuration object do not include a space in the object name.
403722 If you initiate an access policy sync from the Standby node, an admin must resolve any conflicts on the Active partner. Ideally, an access policy created on the Standby node would be synced to the Active node automatically without admin intervention. To work around this problem, avoid syncing an access policy from a Standby node. Otherwise, you must resolve conflicts, if any, on the Active node.
404936 Files named core.xxxx, where xxxx is a number, are created in advanced customization directories during the build process when the customization build cores because of invalid characters in the default customization file. These core files are listed in the user interface.
419104 In the Advanced Customization Image Browser, it is not possible to delete an image if you are using Google Chrome. Use other browser for it or keep images forever.
419748 After a hosted content file is referenced by a portal access resource, the file cannot be deleted, even if the link-type of the resource is not "hosted-content". Use tmsh to clear the sandbox file reference in the resource. Example: tmsh modify apm resource portal-access <NAME>sandbox-file none Now the sandbox file can be deleted.
419836 When you switch from editing one file to editing another file in advanced customization without saving the first file, changes to the first file are lost. User need to modify the file again after the change is lost.
426209 If there are a large number of APM report records, exporting them to a CSV file might fail and the Admin GUI can then become inaccessible. Avoid to export large report data.
430680 The Date Time item in the visual policy editor generates the wrong expression when you select the Weekend template. Edit the generated expression, changing "expr { [clock format [mcget {session.user.starttime}] -format %u] == 0 }" to "expr { [clock format [mcget {session.user.starttime}] -format %u] == 7 }""
431549 If you click Access Policy >Hosted Content >Manage Profile Access from any partition other than Common, the screen grays out and a loading icon displays and spins continuously.
432925 In the visual policy editor if you try to add a macro using the "Support for Microsoft Exchange" template, an error prevents you from saving the macro.
437743 An access profile configuration that uses an SSL Certificate fails to import. This happens because of a change in the method to import SSL certificates. You can either exclude above-mentioned objects prior to export and then recreate them after the import or (not recommended) or edit the config manually and import the SSL certificate prior to import.
438684 If you start to create an access profile and you set the Profile Type to SSO, you cannot complete the configuration from the New Profile screen unless an SSO configuration already exists. To work around this problem, you can create an SSO Configuration prior to creating the new Access Profile of Type SSO.
440177 If you type or cut and paste an image file name into the Advanced Customization GUI, the file name does not fit the expected naming convention. After you save the file and reopen it, errors occur if you click Restore Default. Always use the image selector widget to change image files.
453722 While a policy-sync is in progress from a device to other member devices (5 members or more), the user loses GUI connection to the BIG-IP systems for a few minutes. To prevent this problem, restrict the sync-only device group to no more than 5 members.

Authentication and SSO-related issues

ID number Description
355490 TACACS+ accounting STOP messages are sent successfully and are properly logged on the TACACS+ accounting server. Sometimes when the reply from the TACACS+ server is processed, "Invalid reply error message" is logged on APM. However, this message does not indicate any failure in sending the accounting STOP message to the TACACS+ server. This error message can be ignored because the accounting functionality works.
355981 APM CRLDP Authentication Agent binds anonymously to the LDAP server to retrieve CRL files. An option for a strong authentication bind is not currently supported.
367621 Access Policy Manager does not support IPv6 for communicating with the OCSP responder. Configuring the OCSP URL with an IPv6 address or a hostname that resolves to an IPv6 address will not work. Acess Policy Manager uses OpenSSL BIO APIs to connect to the OCSP responder and these calls do not support IPv6.
376615 Username and password are not sent when the On-Demand Cert Auth agent is used in an access policy; as a result logon fails. The problem happens for these clients: iOS, Android, Windows Mobile, and Linux CLI. To work around this problem, configure the access policy so that the Logon page agent is before the On-Demand Cert Agent.
382390 OCSP authentication support for the Machine Cert agent does not work.
399696 Selecting an SSO configuration with WEBSSO::select does not work for form-based client-initiated and SAML SSO configurations. Use a variable to assign the configuration object name: set sso_config /Common/SAML-config WEBSSO::select $sso_config unset sso_config
400726 When the BIG-IP system acts as a SAML IdP, you cannot create the assertion with multi-valued attributes. When the BIG-IP system acts as a SAML SP and there is a multi-valued attribute inside the assertion, then the BIG-IP system processes only the first value of that multi-valued attribute.
403659 When configuring a BIG-IP system as a SAML Identity Provider, the displayed range of possible values in seconds for the assertion validity timeout is incorrect. The correct range is 1 - 86400 seconds.
404765 If you export an access policy with a SAML SP connector that uses a certificate, the certificate name (including partition) is not formatted correctly. This prevents import from working. To work around the problem, create the SP connector and import the associated certificate on the target system.
405352 If you enter a bad FQDN for domain controller in an NTLM Auth configuration and a DNS server responds with DNS SERVFAIL, the NTLM Auth configuration does not work even after you fix the incorrect FQDN. To work around this problem, after you correct the FQDN in the NTLM Auth configuration, restart the ECA plugin and NLAD daemon using this command: bigstart restart nlad. Note: To avoid future problems due to misconfigurations, you can configure your DNS server to return a negative response.
419754 When using a local user database instance for authentication on APM, if a user that is flagged to change password leaves the password field empty, the user is prompted again to change password. Whether the user types a new password or leaves the password field empty again, the user is prompted again to change password. APM handles a subsequently entered non-empty password correctly.
420506 When using the Local Database agent with a "write" action, the list of properties available includes "groups"; however, this property is a read-only property and any attempt to write to it fails.
428387 AuthRequest and Assertion generation could fail if the configuration (IdpEntityID, ACS, SAML Attributes, and so on) contain special XML characters, such as [&,<, >,",']. Replace special XML characters with XML-escape codes in the configuration: " &quot; ' &apos; < &lt; > &gt; & &amp; For example, replace "http://f5.com/acs_url?user=5&password=pass" with "http://f5.com/acs_url?user=5&amp;password=pass""
428894 When a user logs in with Multidomain SSO, some cookies are set. At logout, one set of these cookies does not have a domain set, and are not deleted. "Clearing the cookies allows the user to log in again. The problem does not seem to occur if you change "Cookie Scope" to "Domain" instead of "Host"
432102 If the RelayState parameter includes HTML and XHTML special characters, then BIG-IP as IdP or BIG-IP as SP does not process them correctly. To use reserved characters in HTML (",',&,<,>) as part of SAML RelaySate, convert them to their HTML entities (&#34; &#39; &#38; &#60; &#62;).
433243 Other SAML Service Provider (SP) implementations could reject a SAML assertion generated by the BIG-IP system if the clock on the other system is running behind the clock on the BIG-IP system. Adjust the clock on SP system to the time that is set on the BIG-IP system that acts as the SAML Identity Provider (IdP).
439452 SAML single log out (SLO) does not work if the NameID value in the SAML Assertion contains spaces. If the NameID value includes a space, then URL encode the space to %20. Type %20 in place of space into the Assertion Subject Value field. You configure this field when the BIG-IP system acts as a SAML Identity Provider (IdP) and you are configuring a Local IdP Service and setting Assertion Settings for it.
439680 The BIG-IP system as SP supports only rsa-oaep (as defined here: http://www.w3.org/2001/04/xmlenc#rsa-oaep-mgf1p) for key transport. When the BIG-IP system configured as SP receives a SAML assertion with an unsupported encryption algorithm (for example, rsa-1_5 for key transport instead of rsa-oaep), the BIG-IP system fails to report that algorithms are unsupported, and proceeds to the decryption phase, which fails. The only issue here is that the error reported does not directly point to the cause of failure which makes troubleshooting more difficult.
440395 If you have an HA pair and try to reset AD cache (group cache or PSO cache), the standby node logs this misleading message: Cannot cleanup cache if other options were changed for AAA AD Server.
440468 When the BIG-IP system is configured as a SAML Service Provider (SP), APD can crash if the IdP connector object that is used specifies a single logout URL. A crash occurs only when the SP receives a SAML assertion that does not include a SessionIndex attribute in the AuthnStatement element. "To work around the problem: 1. Reconfigure IdP to send Assertion with SessionIndex attribute in AuthnStatement element, or 2. Clear single-logout-url in IdP connector object on the BIG-IP system.
475977 The BIG–IP system supports exclusive canonicalization only, which is recommended in the SAML 2.0 specification. As a result, signed messages canonicalized with other algorithms are rejected by the BIG-IP system. The supported algorithm is documented at http://www.w3.org/2001/10/xml-exc-c14n#.
485387 An encrypted assertion from an external IdP can contain the RetrievalMethod element to specify a link to the EncryptedKey element. The EncryptedKey element contains the key for decrypting the CipherData associated with an EncryptedData element. BIG-IP as SP does not support the RetrievalMethod element while processing an encrypted assertion. As a result, the assertion is not processed properly, and error messages are printed to the log files: - Cannot decrypt SAML Assertion - failed to process encrypted assertion, error: Cipher value from EncryptedKey element not found.

Secure Web Gateway issues

ID number Description
431077 You cannot use tmsh to change the logging level for Secure Web Gateway content analytics. To work around the problem, you can perform the following steps: 1. Use SSH to connect and log into the BIG-IP system. 2. Change directories to /var/antserver/wsgsdk/config/ant_server 3. Open the ant_server.config file for edit and modify the ANT_SERVER_LOG_LEVEL variable to desired level. Note: The ANT_SERVER_LOG_LEVEL variable can range from 0 (Log Nothing) to 8 (Extra Debug). The variable is set to 3 by default.
433127 When creating schedules for Secure Web Gateway Schemes, the option to press a button labeled "Now" can be used to obtain the current time. This time is local to where the Admin GUI is located. To work around this problem, you can type the desired time into the schedule field, or you can use the slider bars to adjust the time range.
436138 If you use Kerberos authentication with the Request Based Auth option set to Enabled and you use Secure Web Gateway explicit forward proxy, access to web sites fails. To work around the problem, set the Request Based Auth option to Disabled.
436196 Searches on event logs for Secure Web Gateway time out when there is a very large number of records, close to the 1 million records that can be stored. Simple custom search works fine.
441458 An iRule is used to implement SSL bypass in Secure Web Gateway. The current iRule does not check for situations where more than one category has been returned for a give URL. This can cause bypass to fail. The likelihood of this event is generally rare.
442479 URL categorization, either through use of a scheme or through an iRule, can intermittently fail, if Secure Web Gateway (SWG) log level is set to debug. When using a scheme and failure occurs, the default action is taken. When using an iRule for SSL bypass and a failure occurs, the connection is reset and the site is blocked. Switching off debug might help to reduce the recurrence of the issue. To switch off debug, set the DB variable 'log.SWG.level' to notice (default) or above.
445890 If the Secure Web Gateway database download fails, the system continues to retry the download. If you disable downloads in the GUI or disable downloads for urldbmgr in tmsh, the system continues to retry. To work around this problem, you must either: restart urldbmgrd, the database download daemon, from the command line or find and fix the root problem; sometimes this error occurs because the DNS server is not configured correctly.
479287 When using an HTTP 407 Response or HTTP 401 Response agent in an access policy for SWG-Explicit or SWG-Transparent profile type, respectively, without additional configuration Kerberos authentication attempts always fail. The session variable, session.server.network.name, seems to be set to the actual website to which the client is trying to connect instead of to the proxy URL (virtual server proxy domain name). This results in GSS-API errors when getting credential information for Kerberos authentication. The access policy (with access profile type SWG+Explicit or SWG+Transparent) includes HTTP 407 Response (for SWG+Expliceit) or HTTP 401 Response (for SWG+Transparent) and Kerberos Auth actions and an Allow ending. (For APM versions earlier than 11.6.0, the access policy would include an SWG Scheme action before the ending.) Users cannot authenticate to the SWG-Explicit or the SWG-Transparent proxy if attempting to use Kerberos authentication. To work around the problem, add a Variable Assign agent to the access policy after the HTTP 407 Response (or HTTP 401 Response) action. Add a Variable Assign entry as follows. Type this custom variable in the left pane: session.server.network.name and, in the right pane, select Text and type the appropriate domain name.

Other issues

ID number Description
360889 For ACLs that are generated from a portal access resource, port 0 (zero) matches against port 80 (when the scheme is HTTP) and against port 443 (when the scheme is HTTPS). For ACLs otherwise, port 0 matches against any port.
383511 The Device EPSEC Status screen should reflect the recent status of all devices in the device group. When a request to see the device status of a device group is made, the Changes pending link displays. After sync, the link should disappear and the status should be displayed. Perform "Sync from group" by clicking the Changes pending link and navigate to the Device EPSEC Status screen. The status displays.
384479 When you configure a virtual server for Oracle Access Manager integration (by selecting the OAM Support option), the option to select a specific AccessGate does not apply to OAM 10g environments.
389881 The portal access feature in APM does not support Flex Runtime Shared Libraries using ActionScript3.
398657 On all platforms, the active session count might be significantly large at times likely due to a counter underflow. N/A
409233 When an admin terminates an APM session and an associated View Client connection is proxied through APM, the connection stalls for one minute during which time APM displays a frozen View Client screen to the user.
414411 When you use visual policy editor from the Chrome browser, images do not preload and as a result, the navigation bar flickers. Use Firefox or Internet Explorer.
414420 Sideband connects do not work from an ACCESS_SESSION_CLOSED event. If this is attempted, currently, it causes a TMM crash. Do not use sideband connects from an ACCESS_SESSION_CLOSED event.
415262 If you use tmsh to create a connectivity profile and set another connectivity profile as the parent, the profile that you create does not inherit this information: Win/Mac Edge client, Server List, Location DNS list, All Mobile client settings. If you create the profile in GUI, all the information is inherited.
419996 When you import users to a local user database, any first or last name with a space in it is truncated to the first space.
425731 Sometimes when an access policy is running, a TCP reset is sent to the client and the following message is logged in /var/log/ltm: Internal error (APM::RBA requested abort (trans end error)).
431149 "Access Policy configuration has changed on gateway" can be seen in scenarios where there are multiple slots on a chassis in an HA pair (in both vCMP and chassis only mode). To work around the problem, type the command "bigstart restart apd" on the primary slot.
440203 When you use an iApp to create an APM service, after the access policy and related objects are created, the notification Apply Access Policy on the GUI might still be enabled. This happens even though the generation number in the corresponding access profile has been increased by 1. To disable this notification, you can click the Apply Access Policy link. "Click the "Apply Access Policy" to turn off this notification. Another workaround is to modify the iApp script by putting the command "tmsh modify apm profile access <NAME>generation-action increment" into a different transaction. This can be done by creating a shell script from the iApp script. The shell script consists of two lines: sleep <SAY 5 SECONDS> tmsh modify apm profile access <NAME>generation-action increment Then in the iApp script execute this shell script in the background."
440290 During some Policy-sync attempts, the SyncStatus flag for the devices keeps toggling and status messages keep changing (In-Sync, Changes Pending, Not All devices are synced, and so on). It can take over 15 minutes for the status messages to stabilize. This might occur when there is a large delay in the Sync requests between devices most likely due to WAN. The fluctuations stop after some time.
441482 Although there is a tmsh provision command shown for Secure Web Gateway (SWG) on platforms with less than 8 GB of memory, running the command fails because there is no support for SWG on those platforms. This applies to certain BIG-IP appliances that have less than 8 GB of memory, and to vCMP and VE guests with less than 8 GB of memory allocated. (For memory information, see the Platform Guide for your platform.) Provisioning fails with a message similar to the following: Provisioning failed with error 1 - 'Memory limit exceeded. 5656 MB are required to provision these modules, but only 3964 MB are available.' Workaround: You may provision APM plus SWG only on platforms with 8 GB of memory or more. To use APM and SWG together on platforms with exactly 8 GB of memory, LTM provisioning must be set to None. (To do so, uncheck the box next to Local Traffic (LTM) on the Resources Provisioning screen, if applicable.) To fully support the LTM-APM-SWG combination, reserve at least 12 GB of memory for VE instances, or at least 16 GB for vCMP guests on BIG-IP or VIPRION platforms.
459652 The default VE disk space of 100 GB is not enough to support more than one installed image when both APM and SWG are installed and provisioned. This issue is specific to VE versions 11.5.0 and 11.5.1. An attempt to install a new release or a hotfix on the second default volume fails with a disk-full error message. Workaround: Stop VE and increase the size of the VE disk to at least 124 GB. Then restart VE. For information on how to increase VE disk size, see SOL14952: Extending disk space on BIG-IP Virtual Edition, available here: http://support.f5.com/kb/en-us/solutions/public/14000/900/sol14952.html.
477090 To launch sessions from a webtop using an HTML5 client, there is an additional requirement. The View Connections Server settings for a VMware Horizon View server include Blast Secure Gateway settings. To be able to launch VMware View sessions from an APM webtop using an HTML5 client, ensure that the check box, Use Blast Secure Gateway for HTML access, is cleared. The requirement is missing from BIG-IP Access Policy Manager: Third-Party Integration Implementations.
495769 To prevent duplicate logon prompts, there is an additional requirement. APM displays a login prompt for the View client. To prevent another login prompt from being displayed by the View Connection Server, disable the Display a pre-login message setting on the VMware Horizon View server. Note: To display a disclaimer message for a View client, add a VMware View Logon Page with type Disclaimer in the access policy. The requirement is missing from BIG-IP Access Policy Manager: Third-Party Integration Implementations.

Contacting F5 Networks

Phone: (206) 272-6888
Fax: (206) 272-6802
Web: http://support.f5.com
Email: support@f5.com

For additional information, please visit http://www.f5.com.

Additional resources

You can find additional support resources and technical documentation through a variety of sources.

F5 Networks Technical Support

Free self-service tools give you 24x7 access to a wealth of knowledge and technical support. Whether it is providing quick answers to questions, training your staff, or handling entire implementations from design to deployment, F5 services teams are ready to ensure that you get the most from your F5 technology.

AskF5

AskF5 is your storehouse for thousands of solutions to help you manage your F5 products more effectively. Whether you want to search the knowledge base periodically to research a solution, or you need the most recent news about your F5 products, AskF5 is your source.

F5 DevCentral

The F5 DevCentral community helps you get more from F5 products and technologies. You can connect with user groups, learn about the latest F5 tools, and discuss F5 products and technology.

AskF5 TechNews

Weekly HTML TechNews
The weekly TechNews HTML email includes timely information about known issues, product releases, hotfix releases, updated and new solutions, and new feature notices. To subscribe, click TechNews Subscription, complete the required fields, and click the Subscribe button. You will receive a confirmation. Unsubscribe at any time by clicking the Unsubscribe link at the bottom of the TechNews email.
Periodic plain text TechNews
F5 Networks sends a timely TechNews email any time a product or hotfix is released. (This information is always included in the next weekly HTML TechNews email.) To subscribe, send a blank email to technews-subscribe@lists.f5.com from the email address you are using to subscribe. Unsubscribe by sending a blank email to technews-unsubscribe@lists.f5.com.

Legal notices

Was this resource helpful in solving your issue?




NOTE: Please do not provide personal information.



Incorrect answer. Please try again: Please enter the words to the right: Please enter the numbers you hear:

Additional Comments (optional)