Applies To:

Show Versions Show Versions

Manual Chapter: Configuring Virtual Servers for Network Access
Manual Chapter
Table of Contents   |   << Previous Chapter

Associating a virtual server with network access

When creating a virtual server for an access policy, specify that the virtual server is a host virtual server, and not a network virtual server.
  1. On the Main tab, click Local Traffic > Virtual Servers . The Virtual Server List screen displays a list of existing virtual servers.
  2. Click the name of the virtual server you want to modify.
  3. For the Destination setting, select Host and in the Address field, type the IP address for the virtual server.
  4. From the HTTP Profile list, select http.
  5. In the Access Policy area, from the Access Profile list, select the access profile.
  6. From the Connectivity Profile list, select the connectivity profile.
  7. If you are creating a virtual server to use with portal access resources in addition to remote desktops, from the Rewrite Profile list, select the default rewrite profile, or another rewrite profile you created.
  8. If you use server SSL for this connection, from the SSL Profile (Server) list, select a server SSL profile.
  9. If you use client SSL for this profile, from the SSL Profile (Client) list, select a client SSL profile.
  10. Select the Citrix Support check box if you want to provide connections to Citrix desktop resources.
  11. Select the OAM Support check box if you want to provide native integration with an OAM server for authentication and authorization. You must have an OAM server configured in order to enable OAM support.
  12. Click Update.
Your access policy is now associated with the virtual server.
Table of Contents   |   << Previous Chapter

Was this resource helpful in solving your issue?




NOTE: Please do not provide personal information.



Incorrect answer. Please try again: Please enter the words to the right: Please enter the numbers you hear:

Additional Comments (optional)