Create a lease pool to provide internal network addresses for network access tunnel users.
Important: Network access with IPv6 alone is not supported. An IPv6 tunnel
requires a simultaneous IPv4 tunnel, which is automatically established when you assign IPv4
and IPv6 lease pools, and set the version to to
In the navigation pane, select
The IPv6 Lease Pools list appears.
Click the Create button.
In the Name box, type a name for the
Names must begin with a letter, and can contain only letters,
numbers, and the underscore (_) character.
Add IPv6 addresses to the lease pool.
- To add a single IP address, in the Member List area, select
IP Address for the type. In the
IP Address box, type the IP address.
- To add a range of IP addresses, in the Member List area,
select IP Address Range for the type. In
the Start IP Address box, type the first IP
address, and in the End IP Address box,
type the last IP address.
Click the Add button.
A lease pool is created with the IP address or IP address range you
To delete an IP address or IP address range, select the IP address or IP
address range in the member list, and click the Delete button.