Create a lease pool to provide internal network addresses for network access
Important: Network access with IPv6 alone is not supported. An
IPv6 tunnel requires a simultaneous IPv4 tunnel, which is automatically established
when you assign IPv4 and IPv6 lease pools, and set the version to
On the Main tab, select
The IPv6 Lease Pools list appears.
Click the Create button.
In the Name field, type a name for the resource.
Add IPv6 addresses to the lease pool.
- To add a single IP address, in the Member List area, select
IP Address for the type. In the IP
Address field, type the IP address.
- To add a range of IP addresses, in the Member List area, select
IP Address Range for the type. In the
Start IP Address field, type the first IP
address, and in the End IP Address field, type the
last IP address.
Click the Add button.
A lease pool is created with the IP address or IP address range you
To delete an IP address or IP address range, select the IP address or IP address
range in the member list, and click the Delete button.