Applies To:

Show Versions Show Versions

Release Note: BIG-IP AAM 13.0.0 Release Notes
Release Note

Original Publication Date: 07/06/2017

Summary:

This release note documents the version 13.0.0 release of BIG-IP Application Acceleration Manager. You can apply the software upgrade to systems running software versions 11.x or 12.x.

Contents:

- Platform support
- Configuration utility browser support
- Compatibility of BIG-IQ products with BIG-IP releases
- User documentation for this release
- Fixes, behavior changes, and known issues
- New in 13.0.0
- Installation overview
     - Installation checklist
     - Installing the software
     - Post-installation tasks
     - Installation tips
- Upgrading from earlier versions
- Contacting F5 Networks
- Legal notices

Platform support

This version of the software is supported on the following platforms:

Platform name Platform ID
BIG-IP 6900 FIPS D104
BIG-IP 11000 E101
BIG-IP 11050, 11050 NEBS E102
BIG-IP 2000 Series (2000s, 2200s) C112
BIG-IP 4000 Series (4000s, 4200v) C113
BIG-IP 5000 Series (5000s, 5050s, 5200v, 5250v) C109
BIG-IP 7000 Series (7000s, 7050s, 7055, 7200v, 7250v, 7255) D110
BIG-IP 10050 Series (10150s-NEBS, 10350v (AC), 10350v-NEBS, 10350v-FIPS) D112
BIG-IP 10000 Series (10000s, 10050s, 10055, 10200v, 10250v, 10255) D113
BIG-IP 12000 Series (12250v) D111
VIPRION B2100 Blade A109
VIPRION B2150 Blade A113
VIPRION B2250 Blade A112
VIPRION B4300, B4340N Blade A108, A110
VIPRION B4450 Blade A114
VIPRION C2200 Chassis D114
VIPRION C2400 Chassis F100
VIPRION C4480, C4480N Chassis J102, J103
VIPRION C4800, C4800N Chassis S100, S101
Virtual Edition (VE) Z100
vCMP Guest Z101

These platforms support various licensable combinations of product modules. This section provides general guidelines for module support.

Most of the support guidelines relate to memory. The following list applies for all memory levels:

  • vCMP supported platforms
    • VIPRION B2100, B2150, B2250, B4200
    • VIPRION B4300 blade in the C4480(J102) and the C4800(S100)
    • VIPRION B4450 blade in the C4480(J102) and C4800(S100)
    • BIG-IP 5200v, 5250v, 7200v, 7250v, 10200v, 10250v, 10350v, 12250v
    • BIG-IP i5800, i7800, i10800

Memory: 12 GB or more

All licensable module-combinations may be run on platforms with 12 GB or more of memory, and on VE and vCMP guests provisioned with 12 GB or more of memory. Note that this does not mean that all modules may be simultaneously provisioned on all platforms with 12 GB or more of memory. The BIG-IP license for the platform determines which combination of modules are available for provisioning.

Memory: 8 GB

The following guidelines apply to the BIG-IP 2000s, 2200s, 6900 platforms and to VE guests configured with 8 GB of memory. (A vCMP guest provisioned with 8 GB of memory has less than 8 GB of memory actually available and thus does not fit in this category.)

  • No more than three modules should be provisioned together.
  • On the 2000s and 2200s, Application Acceleration Manager (AAM) can be provisioned with only one other module.
  • To use Access Policy Manager (APM) and Secure Web Gateway (SWG) modules together on platforms with exactly 8 GB of memory, Local Traffic Manager (LTM) provisioning must be set to None.

Memory: Less than 8 GB and more than 4 GB

The following guidelines apply to platforms, and to VE and vCMP guests provisioned with less than 8 GB and more than 4 GB of memory. (A vCMP guest provisioned with 8 GB of memory has less than 8 GB of memory actually available and thus fits in this category.)

  • No more than three modules (not including AAM) should be provisioned together.
  • Application Acceleration Manager (AAM) cannot be provisioned with any other module; AAM can only be provisioned standalone.
  • Analytics (AVR) counts towards the two module-combination limit (for platforms with less than 6.25 GB of memory).

Memory: 4 GB or less (VE only)

The following guidelines apply to VE instances provisioned with 4 GB or less of memory.

  • No more than two modules may be configured together.
  • AAM should not be provisioned, except as Dedicated.
  • ASM can be provisioned with this amount of memory, but a sizing exercise should be performed to ensure that it does not hit capacity issues.

VIPRION and vCMP caching and deduplication requirements

Application Acceleration Manager (AAM) supports the following functionality when configuring vCMP and VIPRION platforms.

  • AAM does not support disk-based caching functionality on vCMP platforms. AAM requires memory-based caching when configuring it to run on vCMP platforms.
  • AAM supports disk-based caching functionality on VIPRION chassis or blades.
  • AAM does not support deduplication functionality on vCMP platforms, or VIPRION chassis or blades.

vCMP memory provisioning calculations

The amount of memory provisioned to a vCMP guest is calculated using the following formula: (platform_memory- 3 GB) x (cpus_assigned_to_guest / total_cpus).

As an example, for the B2100 with two guests, provisioned memory calculates as: (16-3) x (2/4) ~= 6.5 GB.

For certain platforms, the vCMP host can allocate a single core to a vCMP guest. However, because a single-core guest has relatively small amounts of CPU resources and allocated memory, F5 supports only the following products or product combinations for a single-core guest:
  • BIG-IP LTM standalone only
  • BIG-IP GTM standalone only
  • BIG-IP LTM and GTM combination only

Configuration utility browser support

The BIG-IP Configuration Utility supports these browsers and versions:

  • Microsoft Internet Explorer 11.x
  • Mozilla Firefox v40, or later
  • Google Chrome v44, or later

Compatibility of BIG-IQ products with BIG-IP releases

K14592: Compatibility of BIG-IQ products with BIG-IP releases provides a summary of version compatibility for specific features between the BIG-IQ system and BIG-IP releases.

User documentation for this release

For a comprehensive list of documentation that is relevant to this release, refer to the BIG-IP AAM / VE 13.0.0 Documentation page.

Fixes, behavior changes, and known issues

For a comprehensive list of fixes, behavior changes, and known issues for this release, refer to the BIG-IP 13.0.0 Release Information page.

New in 13.0.0

HTTP/2 replaces SPDY

HTTP/2 has replaced SPDY, which is now considered deprecated by Google, its creator, and is no longer supported in Chromium. Deprecation: SPDY/2, SPDY/3 and SPDY/3.1 no longer supported. Originally part of the Application Acceleration Manager, SPDY Gateway provided users a method to configure BIG-IP to offer SPDY functionality to HTTP clients for non-SPDY-compliant pool members. Gateway acts as a front-end proxy to allow multiplexed transactions over a single connection. SPDY Gateway has been removed in this release.

Installation overview

This document covers very basic steps for installing the software. You can find complete, step-by-step installation and upgrade instructions in BIG-IP Systems: Upgrading Software, and we strongly recommend that you reference this information to ensure successful completion of the installation process.

Installation checklist

Before you begin:

  • Use BIG-IP iHealth to verify your configuration file. For more information, see K12878: Generating BIG-IP diagnostic data using the qkview utility.
  • Update/reactivate your system or vCMP host license, if needed, to ensure that you have a valid service check date. For more information, see K7727: License activation may be required prior to a software upgrade for the BIG-IP or Enterprise Manager system.
  • Ensure that your system is running version 11.x or later.
  • Download the .iso file (if needed) from F5 Downloads to /shared/images on the source for the operation. (If you need to create this directory, use the exact name /shared/images.)
  • Configure a management port.
  • Set the console and system baud rate to 19200, if it is not already.
  • Log on as an administrator using the management port of the system you want to upgrade.
  • Boot into an installation location other than the target for the installation.
  • Save the user configuration set (UCS) in the /var/local/ucs directory on the source installation location, and copy the UCS file to a safe place on another device.
  • Log on to the standby unit, and only upgrade the active unit after the standby upgrade is satisfactory.
  • Turn off mirroring.
  • If you are running Application Acceleration Manager, set provisioning to Minimum.
  • If you are running Policy Enforcement Manager, set provisioning to Nominal.
  • If you are running Advanced Firewall Manager, set provisioning to Nominal.

Installing the software

You can install the software at the command line using the Traffic Management shell, tmsh, or in the browser-based Configuration utility using the Software Management screens, available in the System menu. Choose the installation method that best suits your environment.
Installation method Command
Install to existing volume, migrate source configuration to destination tmsh install sys software image [image name] volume [volume name]
Install from the browser-based Configuration utility Use the Software Management screens in a web browser.

Sample installation command

The following command installs version 13.0.0 to volume 3 of the main hard drive.

tmsh install sys software image BIGIP-13.0.0.0.0.1645.iso volume HD1.3

Post-installation tasks

This document covers very basic steps for installing the software. You can find complete, step-by-step installation and upgrade instructions in BIG-IP Systems: Upgrading Software, and we strongly recommend that you reference this information to ensure successful completion of the installation process.

After the installation finishes, you must complete the following steps before the system can pass traffic.
  1. Ensure the system rebooted to the new installation location.
  2. Use BIG-IP iHealth to verify your configuration file. For more information, see K12878: Generating diagnostic data using the qkview utility.
  3. Log on to the browser-based Configuration utility.
  4. Run the Setup utility.
  5. Provision the modules.
Note: You can find information about running the Setup utility and provisioning the modules in BIG-IP TMOS implementations Creating an Active-Standby Configuration Using the Setup Utility and Creating an Active-Active Configuration Using the Setup Utility.

Installation tips

  • The upgrade process installs the software on the inactive installation location that you specify. This process usually takes between three minutes and seven minutes. During the upgrade process, you see messages posted on the screen. For example, you might see a prompt asking whether to upgrade the End User Diagnostics (EUD), depending on the version you have installed. To upgrade the EUD, type yes, otherwise, type no.
  • You can check the status of an active installation operation by running the command watch tmsh show sys software, which runs the show sys software command every two seconds. Pressing Ctrl + C stops the watch feature.
  • If installation fails, you can view the log file. The system stores the installation log file as /var/log/liveinstall.log.

Upgrading from earlier versions

Your upgrade process differs depending on the version of software you are currently running.

Upgrading from version 11.x or later

When you upgrade from version 11.x or later, you use the Software Management screens in the Configuration utility to complete these steps. To open the Software Management screens, in the navigation pane of the Configuration utility, expand System, and click Software Management. For information about using the Software Management screens, see the online help.

Upgrading from versions earlier than 11.x

You cannot roll forward a configuration directly to this version from BIG-IP version 10.x or earlier. You must be running version 11.x (or later) software. For details about upgrading from earlier versions, see the release notes for the associated release.

Automatic firmware upgrades

If this version includes new firmware for your specific hardware platform, after you install and activate this version, the system might reboot additional times to perform all necessary firmware upgrades.

Contacting F5 Networks

Phone - North America: 1-888-882-7535 or (206) 272-6500
Phone - Outside North America, Universal Toll-Free: +800 11 ASK 4 F5 or (800 11275 435)
Fax: See Regional Support for your area.
Web: https://support.f5.com/csp/home
Email: support@f5.com

For additional information, please visit http://www.f5.com.

Additional resources

You can find additional support resources and technical documentation through a variety of sources.

F5 Networks Technical Support

Free self-service tools give you 24x7 access to a wealth of knowledge and technical support. Whether it is providing quick answers to questions, training your staff, or handling entire implementations from design to deployment, F5 services teams are ready to ensure that you get the most from your F5 technology.

AskF5

AskF5 is your storehouse for thousands of knowledgebase articles that help you manage your F5 products more effectively. Whether you want to browse periodically to research a solution, or you need the most recent news about your F5 products, AskF5 is your source.

F5 DevCentral

The F5 DevCentral community helps you get more from F5 products and technologies. You can connect with user groups, learn about the latest F5 tools, and discuss F5 products and technology.

AskF5 Publication Preference Center

To subscribe, click AskF5 Publication Preference Center, enter your email address, select the publications you want, and click the Submit button. You will receive a confirmation email. You can unsubscribe at any time by clicking the Unsubscribe link at the bottom of the email, or on the AskF5 Publication Preference Center screen.

  • TechNews Weekly eNewsletters: Up-to-date information about product and hotfix releases, new and updated articles, and new feature notices.
  • TechNews Notifications: Periodic plain text TechNews, sent any time F5 releases a product or hotfix. (This information is always included in the next weekly HTML TechNews email.)
  • Security Alerts: Timely security updates and ASM attack signature updates from F5.

Legal notices

Was this resource helpful in solving your issue?




NOTE: Please do not provide personal information.



Incorrect answer. Please try again: Please enter the words to the right: Please enter the numbers you hear:

Additional Comments (optional)