Original Publication Date: 09/09/2011
The ARX CE application runs on a Windows file Server, enabling it to become a gateway to private, hybrid, and public cloud storage. It also can serve as a gateway to remote NFS or CIFS storage. ARX CE replicates file content to remote storage on a user-defined schedule, and recalls (or retrieves) the file content in response to client requests.
An ARX managed volume can use the ARX CE as a tier-2 or tier-3 storage device for files that have not been modified for long periods of time. You can also use the ARX CE in front of an ARX, possibly at multiple remote sites, to migrate files from these sites to a central ARX pair.
ARX CE supports the following public cloud services:
ARX CE also supports the following private-cloud services:
This release note documents Release 1.9.0, build 2, of the ARX CE software. We recommend this release for those customers who want the fixes and enhancements listed in Fixes and Enhancements in This Release. This release is cumulative, and includes all fixes and enhancements released since version 1.8.1, build 17.
Note: F5 offers general availability releases and general sustaining releases. For detailed information on our policies, refer to Solution 8986, F5 software life-cycle policy.
In addition to these release notes, the ARX CE comes with the following manuals:
You can install the ARX CE on any of the following Windows Servers:
The host machine requires the following minimum resources for the ARX CE:
The minimum supported browsers for the ARX CE GUI are:
As of Release 1.9.0, build 2, the ARX CE is certified for use with Nirvanix and Dell DX cloud storage.
For a complete list of vendor equipment that is usable with this release, refer to the ARX Compatibility Matrix (available from your ARX GUI).
As of Release 1.8.1, build 19, the ARX CE was certified for use with the following new options:
As of Release 1.8.1 build 17, the initial release, the ARX CE was certified for use with Amazon S3 public cloud storage and NFS-based private cloud storage.
Before you install the ARX CE, you must acquire proper licensing. These licensing steps follow a different model than standard F5 licensing.
For installation instructions, refer to the Installation chapter of the ARX Cloud Extender Administration Guide.
Once you install the ARX CE software, refer to the Required Configuration Changes section, which contains important information about configuration on the ARX CE, the host server for the ARX CE, and the ARX.
Release 1.9.0, build 2, introduces support for three new cloud destinations:
Contact your F5 Sales representative to purchase an ARX CE Nirvanix or Dell DX Connector. You can use Nirvanix, Dell DX, or any of the already-supported cloud-storage providers (such as Amazon S3 or an EMC Atmos device) as a migration destination for files on the ARX CE.
Release 1.9.0 also offers the following features:
The current release includes the fixes and enhancements that were distributed in prior releases, as listed below.
Release 1.8.1, Build 19, introduced support for a new cloud destination, EMC Atmos devices. Contact your F5 Sales representative to purchase an ARX CE Atmos Connector for EMC Atmos.
Release 1.8.1, build 19, contained the following fixes:
An uninstall of ARX CE from Windows Server 2008 left behind some defunct ARX CE icons. From the Windows Server 2008 Start menu, the quick launch section contained broken shortcuts for the uninstalled items. Old folders and icons were still visible from the All Programs menu. The ARX CE uninstall process now properly cleans up these items.
The Admin Tools Setup Wizard contains fields for entering a username and password for the admin user, but did not contain a field for re-typing the password. This release of the wizard includes the password-confirmation field.
Release 1.8.1 was the introductory release of the ARX CE. This release supported Amazon S3 public-cloud storage and NFS private-cloud storage.
This table summarizes all of the secondary-storage options behind the ARX CE, and the ARX CE release that introduced support for each of them:
|Storage Device or Service||Public and/or Private?||ARX CE Release|
|Amazon S3 (service)||Public||1.8.1, build 17|
|Nirvanix (service)||Public||1.9.0, build 2|
|EMC Atmos (device)||Private||1.8.1, build 19|
|Dell DX (device)||Private||1.9.0, build 2|
|NFS (on any device)||Private||1.8.1, build 17|
|CIFS (on any device)||Private||1.9.0, build 2|
After the ARX CE software is installed onto its Windows host(s), you must ensure that the ARX, Windows Host(s), and ARX CE have properly-coordinated configuration options.
All of these configuration requirements are also included in the manual, Deploying the F5 ARX with F5 ARX Cloud Extender, where they are each described in context.
ARX snapshots are not supported for the ARX CE. The ARX CE is a temporary staging area for files that migrate to and from cloud storage, so snapshots would typically capture the metadata files (or stubs) that stand in for absent files.
All ARX file-placement rules and tiering rules should run to completion before the ARX CE rules migrate files to cloud storage. Set your ARX schedules to finish before the ARX CE rules begin.
Configure the Windows Server's Anti-Virus or Search and Indexing applications to ignore offline files. If these applications read the clients' offline files, the ARX CE restores all of them from cloud storage. Refer to the ARX Cloud Extender Administration Guide for more information.
The Windows host also requires a CIFS share, to be used as a staging area for transfers to the Cloud. This share should be large enough to accommodate a large percentage of the full-size (non-stub) files that could possibly migrate to it.
Amazon S3 has a Web Access site where you can create "buckets" of cloud storage; do not create buckets for the ARX CE from this site. Create them from the ARX CE Admin Tools, as described in Deploying the F5 ARX with F5 ARX Cloud Extender
Amazon also supports write access through its Amazon Web Services (AWS) Management Console; do not modify any files through this interface. This is considered direct access to back-end files behind the ARX, and compromises ARX metadata. Access all ARX files through an ARX VIP, and modify them from there.
Do not install IPv6 on the Windows Host(s). IPv6 is not supported with the ARX CE.
The following items are known issues in the current release.
The final de migrate operation completes, but leaves the ARX CE disk in a spurious "full" state.
After an ARX CE disk is full from de migrates, message is unclear about resumption of de migrates. (349991)
If the ARX CE disk fills up from a de migrate, the de migration process logs a message that it will de migrate in 30 minutes. The message does not clearly indicate that you must make more space on the Windows server for de migrations to resume. Additionally, when the de migration later resumes, there is no log message to alert you that de migrations have re started.
Error message when cloud provider account is disabled gives no indication this is the issue. (348818)
The ARX CE Control Panel issues the following message when the cloud-storage provider has canceled your account:
[Forbidden! Please ensure that Access Key ID and Secret Key are correct.]
This error message is unclear about possible causes and solutions.
Workaround: Contact your cloud-storage provider and confirm that your service account is still valid.
Workaround: Use these steps to un-installing any ARX CE software:
Windows Explorer may cause unexpected de migrate operations for certain files from cloud storage. (347326)
Windows Explorer may trigger unexpected file-content de migrations from cloud storage; this is due to the file-type awareness of the Windows-Explorer application. The migrations occur when an Explorer user single-clicks the file and leaves the file selected. If Windows Explorer is aware of the file type, it de migrates the file's content in order to populate its "Details" and/or "Preview" panes with the file's metadata. For example, Windows Explorer displays author information for Microsoft Word files and a thumbnail image for JPEG files.
Unable to launch DRTool when logged into server running Admin Tools as a Domain User. (348073)
After the ARX CE installation, only the local Administrator has sufficient privileges to run the DRTool application. Other users in the Administrators group get a "Permission Denied" error when they invoke Start > All Programs > ARX Cloud Extender > ARX CE Admin Tools > ARX CE DR. This problem occurs even when you install the ARX CE using the same (non-Administrator) credentials.
Workaround: After the installation, provide any desired non-Administrator user with Read access to the following directory:
C:\Program Files(x86)\F5 ARX Cloud Extender\secure
Migration of file data to storage cloud provider Nirvanix may fail when ARX CE load balances over multiple links. (363795)
The path to Nirvanix's public-cloud service may experience failures if it load balances HTTP/HTTPS requests over multiple WAN links. Migrations or de migrations may fail with ARX CE log errors similar to:
ERR_DMLOGINMANAGERNIRVANIXIMP_GETSESSIONTOKEN_FAILED  dmloginmanagernirvanix.cpp:560
[80104: Restricted IP Address] dmstreamnirvanix.cpp:2793
This is due to a session token being closely tied to the ARX CE's source- IP address, which is typically the IP address assigned by your service provider. It assumes that traffic is NAT'ed from the ARX CE host(s) as it enters the WAN.
ARX CE first contacts a server at https://services.nirvanix.com to
The remote server returns the address of an upload/download node (for example, https://node4.nirvanix.com) along with a session token. When the ARX CE initiates a connection to the upload/download node, it provides the session token to the node. If this connection's source IP is different from the one used to contact https://services.nirvanix.com (please take NAT into account), then the upload/download node rejects it. This causes the migrate (upload) and/or de migrate (download) operation to fail.
Workaround: Do not use multiple, load-balanced links between the ARX CE and the Nirvanix public-cloud service.
Please prepare the following information before you contact F5 Support about the ARX CE:
Appendix A of the ARX Cloud Extender Administration Guide provides details on finding some of this information.
You can contact F5 through any of the following means:
|F5 Online Knowledge Base:||http://support.f5.com/|
|F5 Services Support Online:||https://websupport.f5.com/|
|F5 Software Trial Support:||https://www.f5.com/trial/secure/support.php/|
For additional information, please visit http://www.f5.com.