Software Release Date: 03/04/2007
Updated Date: 03/15/2007
This release note documents the version 4.2.10 feature release of the WANJet® appliance, and documents changes since the last feature release, version 4.2.8. To review the features introduced in this release, see New features and fixes in this release. For new customers, the software is preinstalled on the WANJet appliance. For existing customers, you can apply the software upgrade to version 3.1.1 and later. For information about installing the software upgrade, please refer to Upgrading the software. For additional information, please refer to the WANJet Appliance Administrator Guide.
Note: F5 now offers both feature releases and maintenance releases. For more information on our release policies, please see Description of the F5 Networks software version number format.
In addition to these release notes, the following user documentation is relevant to this release (depending on your platform).
You can find the product documentation and the solutions database on the AskF5 Technical Support web site.
The supported browsers for the Web UI are:
This release supports the following platforms:
If you are unsure which platform you have, click the About link from any screen in the WANJet appliance's Web UI.
To back up your current configuration before installing the software upgrade, complete the following steps.
https://<WANJet IP address>:10000
To upgrade the WANJet appliance to version 4.2.10, complete these tasks:
Important: For the WANJet appliance to function properly, TCP ports 3703, 3702, 3701, 10000, and 10001 must all be open on a firewall. Any firewalls separating the WANJet appliances must have these ports open. For specific information about configuring ports, refer to the WANJet Appliance Administrator Guide.
Important: Version 4.0 introduced a new licensing procedure. If you are upgrading from version 3.1.x, you must first obtain a Base Registration Key. Do not proceed with the upgrade until you have the Base Registration Key. If you did not receive an email with a Base Registration Key, contact F5 Networks Technical Support (and be sure to have the WANJet appliance serial number) before attempting to install the software upgrade.
https://<WANJet IP address>:10000
The WANJet Status screen opens.
You can perform a remote upgrade to version 4.2.10 from version 3.1.1 or 3.1.2. If you are upgrading remotely from version 3.1.1 or 3.1.2, you must also complete the following tasks.
Note: You must activate the license before you can use the WANJet appliance to optimize traffic. You need to perform this procedure only once for each WANJet appliance.
Note: You need to perform this procedure only if you have not previously saved the chassis serial number in the About box.
This release includes the following new features and fixes.
Management Port (eth4) configuration (CR67733)
You can now configure the interface speed and duplex settings of the Management port on eth4 in the Web UI.
VLAN Configuration on the WANJet appliance (CR71512)
Release 4.2.8 included a VLAN setting called the Trunked VLAN ID which has been changed. This release simplifies the way you configure the local WANJet appliance as part of a VLAN. To configure the WANJet appliance as part of a VLAN, you click the IP address of the local WANJet appliance, and add the VLAN Tag. For details on how to add the VLAN tag to the WANJet appliance, refer to "Managing VLANs on a WANJet appliance" in Chapter 6 of the WANJet Appliance Administrator Guide.
[ Top ]
This release includes the following fixes.
Real Time Traffic report (CR61437)
In previous releases, the amount of network traffic shown in the Real Time Traffic report would periodically spike to twice the actual amount. The Real Time Traffic report now accurately shows the amount of network traffic traveling through the WANJet appliance.
Optimized Sessions in dashboard differs from Optimized Sessions report (CR69690)
The number of Optimized Sessions shown in the WANJet appliance dashboard may not match the number shown in the Optimized Sessions diagnostics report. The information in the dashboard is updated every ten seconds, and shows all connections at that time, including sessions in the process of being set up or torn down. The information in the diagnostics report is static, and shows details only on the established connections. The WANJet Appliance Administrator Guide now clarifies the difference.
ICMP redirection disabled (CR70291)
Under certain conditions, such as static one-arm transparent proxy configurations, the WANJet appliance did not disable ICMP redirects which caused traffic to be routed to the default gateway. As of this release, the WANJet appliance disables ICMP redirects for those configurations.
Error message about logrotate exiting abnormally removed (CR71441)
In past releases, you might have seen a message that said, logrotate Alert exited abnormally. The WANJet appliance no longer reports error messages when logrotate exits and there are missing files.
Remote WANJet appliance configuration (CR71549, CR71591)
In release 4.2.8, when you performed remote WANJet appliance configuration changes, Application QoS policy changes, or IT Service policy changes, the administrator had to manually cycle the appliance from Active to Inactive then back to Active for the configuration changes to take effect. In this release, the configuration changes take place automatically without requiring a manual cycle of the appliance.
Factory defaults option clears reports, logs, and system snapshots (CR71558)
As of release 4.2.5, the WANJet appliance includes a factory defaults option that allows you to restore the factory default values. As of release 4.2.10, you can click WANJet Factory Defaults on the Backup & Restore screen to also clear all logs, reports, and system snapshots from the WANJet appliance.
Changes in US and Canada Daylight Saving Time (CR71811)
The Energy Policy Act of 2005, which was passed by the US Congress in August 2005, changed both the start and end dates for Daylight Saving Time in the United States, effective March 2007. Canada also adopted this change. The resulting changes have been addressed in version 4.2.10 of the WANJet appliance. To find out more about this issue, refer to Solution 6551 on the AskF5 web site.
Application QoS policy changes (CR72569, CR72630)
In previous releases, application QoS policies, which dedicate bandwidth to specific traffic, applied only to optimized TDP traffic. As of this release, application QoS policies apply to all traffic, including UDP and passthrough traffic.
WANJet Netmask and Management Netmask configuration (CR72728)
In past releases, the WANJet appliance used default subnet addresses for the WANJet Netmask and Management Netmask even if you specified a value during initial configuration. The WANJet appliance now uses the netmask values that you specify.
Security vulnerability CVE-2006-6097 addressed (CR73261)
This release addresses security vulnerability CVE-2006-6097 which potentially allowed unauthorized modification of files by means of tar extraction. The security problem is properly fixed as of this release preventing problems with tar file extraction. For additional details, refer to the National Vulnerability Database.
Bridge interface with VLAN ID (CR73307)
In release 4.2.8, if you configured the WANJet appliance as part of a VLAN and assigned a VLAN ID to the bridge interface, you could not optimize traffic on additional VLANs. In release 4.2.10, you can configure the WANJet appliance as part of a VLAN, configure additional VLANs with VLAN IDs, and optimize traffic.
Management IP and WANJet IP addresses must be in separate subnets (CR73310)
In previous releases, the Web UI did not require the Management IP and WANJet IP addresses to be in different subnets, although it was recommended that you place the Management IP in a separate subnet for out-of-band management. As of release 4.2.10, you receive an error message if you attempt to assign Management IP and WANJet IP addresses that are in the same subnet.
System snapshot feature (CR73916)
When running release 4.2.8, taking a system snapshot caused the WANJet Link to become inactive. The WANJet Link is no longer affected by taking a system snapshot as of release 4.2.10.
Traffic slowdown with data warehouse application (CR75285)
In previous releases, users of some applications, such as data warehouse applications, experienced slow application load times from CIFS shared servers. In release 4.2.10, we have improved optimization speed resulting in faster application load times.
Shared key mismatch on remote WANJet appliance (CR75556)
To improve diagnosing the situation where the shared key on a WANJet appliance does not match the shared key on a remote WANJet appliance, we have added a diagnostic log error. In the case of a shared key mismatch, the two appliances remain inactive, and the following message appears in the diagnostic log:
Connection from unauthorized proxy: <IP address of remote WANJet appliance> <alias>
[ Top ]
Once you have installed the software, you can use any of the following new configuration options to update your configuration.
You can now restore the factory default values on the WANJet appliance.
Warning: You should restore the factory defaults only in extreme cases when you want to discard all configuration changes that you have made, and start configuration all over again.
When you use this option, the values in all fields on all screens are reset to the default values, and all configuration changes are lost. The WANJet appliance retains the licensing information, so you do not have to revalidate the license. You do have to reconfigure the rest of the settings and policies.
To restore factory default values
[ Top ]
You can change optimization policies while the WANJet appliance is optimizing traffic without having to restart the appliance or interrupt your users.
To add or reconfigure optimization policies
Refer to Chapter 6 of the WANJet Appliance Administrator Guide for more information about optimization policies.
[ Top ]
The following items are known issues in the current release.
Passthrough sessions (CR60178)
After a high volume of traffic passes through the WANJet appliance, the dashboard may temporarily display more passthrough sessions than are actually occurring.
SSL encryption implementation (CR64020)
SSL encryption is currently implemented only for optimized TCP traffic. In future releases, we plan to support TCP and UDP protocols for SSL encryption.
TDR-2 efficiency impacted by slow servers (CR65171)
TDR-2 efficiency may be degraded when transmitting data from low-performance servers.
UDP port optimization may cause problems on port 53 (CR70172)
When all UDP ports are optimized, DNS services over port 53 may fail. The workaround is to put all UDP ports into passthrough mode, and to specifically open those UDP ports you want to optimize.
[ Top ]