Updated Date: 05/05/2002
The current PTF installs fixes from all PTFs released after 3-DNS, version 4.2. (See the following section, What's fixed in this PTF.).
Note: If you are updating the 3-DNS module on a BIG-IP, do not use the following installation instructions. Refer to the BIG-IP, version 4.2PTF04 note for installation instructions instead.
Use the following instructions to apply the PTF to the 3-DNS, version 4.2.
Important: If you are upgrading an IP Application Switch or a 3-DNS that uses a solid state disk (SSD), use the installation instructions here.
Note: If you have installed prior PTFs, this installation does not overwrite any configuration changes that you made for prior PTFs.
Apply the PTF to the 3-DNS, version 4.2 using the following process. Note that the installation script saves your current configuration.
Use FTP in passive mode from the 3-DNS to download the file. To place FTP in passive mode, type pass at the command line before transferring the file.
Note: This procedure creates over 90MB of temporary space on the /mnt partition. The partition and the im package file are deleted upon rebooting.
iQuery and backward compatability for encryption (CR21270)
iQuery encryption between 3-DNS, version 4.2 and 3-DNS, version 4.0.1 now works properly.
SNMP versioning and host probing (CR19784, CR20916)
The 3-DNS now uses the correct version of SNMP (1 or 2) depending on which version is supported by the SNMP agent on the host.
Support for iControl, version 2.1 (CR19847, CR20178)
This PTF includes support for iControl, version 2.1.
New command argument for 3ndc (CR19886)
You can now monitor DNS transactions without using tcpdump by using the 3ndc querylog command. For additional information, refer to the 3ndc man page.
Using snmpwalk and the 3-DNS MIB (CR19989, CR19994)
You no longer receive an OID error when you use snmpwalk on the 3-DNS MIB, and the following condition exists: the string length (shorter to longer) and the lexicographic sort (a to z) of wide IP names and/or data center names in the MIB are in opposite order.
Updating the Return to DNS counter (CR20139)
The Return to DNS counter now gets updated properly when none of the specified load balancing methods for a wide IP are able to select a pool and virtual server to respond to a query.
Synchronization and viewing server status (CR20170)
When you make configuration changes on a receiver 3-DNS in a sync group, and then view server and virtual server status on the principal 3-DNS, the servers and virtual servers are no longer inaccurately marked as down (red ball).
IP Application Switch platform and probing hosts using TCP (CR20244)
Host probing no longer fails when you are running the 3-DNS on the IP Application Switch platform, and the big3d agents probe protocol is set to TCP.
Configuring default settings for SNMP (CR20258)
You can now reset the SNMP timeouts and retries to their default values.
Compilation errors in 3-DNS MIB (CR20466)
The 3-DNS MIB no longer causes compilation errors with some SNMP management tools.
Netmask on the public IP address when the 3-DNS is behind a firewall (CR20792)
When the 3-DNS is behind a firewall, and the public IP address is defined on the external VLAN, the netmask is now applied correctly; the public IP address is no longer improperly associated with the loopback device.
Removing virtual servers (CR20814)
Removing a virtual server that belongs to a pool that uses the Round Robin load balancing mode no longer causes server errors.
Getting up or down status for 3-DNS, GLOBAL-SITE, and EDGE-FX Cache systems from SNMP (CR21041)
You can now get the proper up or down status from the 3-DNS MIB for 3-DNS, BIG_IP, GLOBAL-SITE, and EDGE-FX Cache systems.
There are no fixes or enhancements in version 4.2PTF03.
There are no fixes or enhancements in version 4.2PTF02.
There are no fixes or enhancements in version 4.2PTF01.
There are no required configuration changes in this PTF.
There are no new known issues as of this PTF.